Community discussions

MikroTik App
 
Sela69
just joined
Topic Author
Posts: 9
Joined: Mon Sep 27, 2021 11:19 pm

Help in configuring Mullvad/Wireguard with v7.1rc6 Chateau 5G

Wed Nov 24, 2021 12:42 am

Hi all,

i've searched and read but there is something I don't understand . I got 2 day free from Mullvad, they told me that they did some test with Mikrotik/routeros and didn't manage to get it working. So they currently don't leave support for it.

What I Did :

- I've configured wireguard interface and peer (allowed address 0.0.0.0/0 ) and I can see "last handshake" timing, so I'm assuming that is working.
- I've configured an Ip address for the wireguard interface.
- I've configured masquerade for the wireguard interface.

Now I would like to route all lan traffic through wireguard interface.

If I set a static route 0.0.0.0/0 gateway="wireguard interface" with lower distance compared to lte interface nothing works (no ping) even if I can see traffic using torch for wireguard interface.

So what I'm missing ?
 
Sela69
just joined
Topic Author
Posts: 9
Joined: Mon Sep 27, 2021 11:19 pm

Re: Help in configuring Mullvad/Wireguard with v7.1rc6 Chateau 5G

Thu Nov 25, 2021 3:25 pm

I did it creating a new route table and some routing rules.

It does works pretty well.

Who is online

Users browsing this forum: 0xAA55, cmmike, Nullcaller, TheCat12 and 49 guests