Hello!
Yes, in System> Profile, the processor load is 100%.
I would like to manage the points using Capsman to control the settings from a single point of control.
Configuration with settings:
# nov/26/2021 13:45:45 by RouterOS 6.48.5
# software id = RXSJ-FN7N
#
# model = CRS354-48P-4S+2Q+
# serial number = B8440C4B52A2
/caps-man channel
add band=2ghz-g/n control-channel-width=20mhz extension-channel=disabled \
frequency=2412,2437,2462 name=KIS-2G reselect-interval=1h tx-power=19
add band=2ghz-b/g/n control-channel-width=20mhz frequency=2437 name=KIS-2GOf \
tx-power=17
add band=5ghz-n/ac control-channel-width=20mhz extension-channel=XX \
frequency=5180,5200,5220,5240,5745,5765,5785,5805,5825 name=KIS-5G \
reselect-interval=1h tx-power=17
add band=2ghz-onlyn control-channel-width=20mhz frequency=2412 name=KIS-Guest \
tx-power=17
/interface bridge
add name=KIS vlan-filtering=yes
/interface vlan
add interface=KIS name=vlan1 vlan-id=1
add interface=KIS name=vlan10 vlan-id=10
add interface=KIS name=vlan50 vlan-id=50
add interface=KIS name=vlan101 vlan-id=101
/caps-man datapath
add bridge=KIS name=KIS2 vlan-id=10 vlan-mode=use-tag
add bridge=KIS client-to-client-forwarding=yes local-forwarding=no name=\
KIS_Office vlan-id=50 vlan-mode=use-tag
add bridge=KIS name=KIS5 vlan-id=10 vlan-mode=use-tag
add bridge=KIS client-to-client-forwarding=yes name=KIS-Guest2 vlan-id=101 \
vlan-mode=use-tag
/caps-man rates
add basic=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps name=rate1 supported=\
12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
/caps-man security
add authentication-types=wpa-psk,wpa2-psk encryption=aes-ccm,tkip \
group-encryption=aes-ccm name=KIS2G passphrase=XXXXX
add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm \
name=KIS-Office passphrase=XXXXX
add authentication-types=wpa-psk,wpa2-psk encryption=aes-ccm,tkip \
group-encryption=aes-ccm name=KIS5G passphrase=XXXXX
add authentication-types=wpa-psk,wpa2-psk encryption=aes-ccm,tkip \
group-encryption=aes-ccm name=KIS-GUest passphrase=XXXXX
/caps-man configuration
add channel=KIS-2G country=kazakhstan datapath=KIS2 guard-interval=long \
hw-protection-mode=none mode=ap name=KIS rates=rate1 rx-chains=0,1,2,3 \
security=KIS2G ssid=KIS-2G tx-chains=0,1,2,3
add channel=KIS-2GOf country=kazakhstan datapath=KIS_Office distance=indoors \
mode=ap name=KIS_Office rates=rate1 rx-chains=0,1,2,3 security=KIS-Office \
ssid=KIS-OFFICE2G tx-chains=0,1,2,3
add channel=KIS-5G country=kazakhstan datapath=KIS5 guard-interval=long \
hw-protection-mode=none mode=ap name=KIS-5G rates=rate1 rx-chains=0,1,2,3 \
security=KIS5G ssid=KIS-5G tx-chains=0,1,2,3
add channel=KIS-Guest country=kazakhstan datapath=KIS-Guest2 guard-interval=\
long hw-protection-mode=rts-cts mode=ap name="KIS Guest" rates=rate1 \
rx-chains=0,1,2,3 security=KIS-GUest ssid=KIS-GUEST2G tx-chains=0,1,2,3
/interface list
add name=WAN
add name=LAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/caps-man access-list
add action=accept allow-signal-out-of-range=10s disabled=no signal-range=\
-70..120 ssid-regexp=""
add action=reject allow-signal-out-of-range=10s disabled=no signal-range=\
-120..-71 ssid-regexp=""
/caps-man manager
set enabled=yes
/caps-man provisioning
add action=create-dynamic-enabled hw-supported-modes=b,gn \
master-configuration=KIS name-format=prefix-identity name-prefix=2G
add action=create-dynamic-enabled hw-supported-modes=ac,an \
master-configuration=KIS-5G name-format=prefix-identity name-prefix=5G
/interface bridge port
add bridge=KIS hw=no interface=ether48
add bridge=KIS hw=no interface=ether8
add bridge=KIS interface=ether1
add bridge=KIS interface=ether2
add bridge=KIS interface=ether3
add bridge=KIS interface=ether4
add bridge=KIS interface=ether5
add bridge=KIS interface=ether6
add bridge=KIS interface=ether7
add bridge=KIS interface=ether9
add bridge=KIS interface=ether10
add bridge=KIS interface=ether11
add bridge=KIS interface=ether12
add bridge=KIS interface=ether13
add bridge=KIS interface=ether14
add bridge=KIS interface=ether15
add bridge=KIS interface=ether16
add bridge=KIS interface=ether17
add bridge=KIS interface=ether18
add bridge=KIS interface=ether19
add bridge=KIS interface=ether20
add bridge=KIS interface=ether21
add bridge=KIS interface=ether22
add bridge=KIS interface=ether23
add bridge=KIS interface=ether24
add bridge=KIS interface=ether25
add bridge=KIS interface=ether26
add bridge=KIS interface=ether27
add bridge=KIS interface=ether28
add bridge=KIS interface=ether29
add bridge=KIS interface=ether30
add bridge=KIS interface=ether31
add bridge=KIS interface=ether32
add bridge=KIS interface=ether33
add bridge=KIS interface=ether34
add bridge=KIS interface=ether35
add bridge=KIS interface=ether36
add bridge=KIS interface=ether37
add bridge=KIS interface=ether38
add bridge=KIS interface=ether39
add bridge=KIS interface=ether40
add bridge=KIS interface=ether41
add bridge=KIS interface=ether42
add bridge=KIS interface=ether43
add bridge=KIS interface=ether44
add bridge=KIS interface=ether45
add bridge=KIS interface=ether46
add bridge=KIS interface=ether47
add bridge=KIS interface=ether49
add bridge=KIS interface=qsfpplus1-1
add bridge=KIS interface=qsfpplus1-2
add bridge=KIS interface=qsfpplus1-3
add bridge=KIS interface=qsfpplus1-4
add bridge=KIS interface=qsfpplus2-1
add bridge=KIS interface=qsfpplus2-2
add bridge=KIS interface=qsfpplus2-3
add bridge=KIS interface=qsfpplus2-4
add bridge=KIS interface=sfp-sfpplus1
add bridge=KIS interface=sfp-sfpplus2
add bridge=KIS interface=sfp-sfpplus3
add bridge=KIS interface=sfp-sfpplus4
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/ip settings
set tcp-syncookies=yes
/interface bridge vlan
add bridge=KIS tagged=ether48 untagged=ether8,ether4 vlan-ids=10
add bridge=KIS tagged=ether48 untagged=ether8,ether4 vlan-ids=50
add bridge=KIS tagged=ether48 untagged=ether8,ether4 vlan-ids=101
/interface list member
add interface=ether1 list=WAN
add interface=ether2 list=LAN
add interface=ether3 list=LAN
add interface=ether4 list=LAN
add interface=ether5 list=LAN
add interface=ether6 list=LAN
add interface=ether7 list=LAN
add interface=ether8 list=LAN
add interface=ether9 list=LAN
add interface=ether10 list=LAN
add interface=ether11 list=LAN
add interface=ether12 list=LAN
add interface=ether13 list=LAN
add interface=ether14 list=LAN
add interface=ether15 list=LAN
add interface=ether16 list=LAN
add interface=ether17 list=LAN
add interface=ether18 list=LAN
add interface=ether19 list=LAN
add interface=ether20 list=LAN
add interface=ether21 list=LAN
add interface=ether22 list=LAN
add interface=ether23 list=LAN
add interface=ether24 list=LAN
add interface=ether25 list=LAN
add interface=ether26 list=LAN
add interface=ether27 list=LAN
add interface=ether28 list=LAN
add interface=ether29 list=LAN
add interface=ether30 list=LAN
add interface=ether31 list=LAN
add interface=ether32 list=LAN
add interface=ether33 list=LAN
add interface=ether34 list=LAN
add interface=ether35 list=LAN
add interface=ether36 list=LAN
add interface=ether37 list=LAN
add interface=ether38 list=LAN
add interface=ether39 list=LAN
add interface=ether40 list=LAN
add interface=ether41 list=LAN
add interface=ether42 list=LAN
add interface=ether43 list=LAN
add interface=ether44 list=LAN
add interface=ether45 list=LAN
add interface=ether46 list=LAN
add interface=ether47 list=LAN
add interface=ether48 list=LAN
add interface=ether49 list=LAN
add interface=qsfpplus1-1 list=LAN
add interface=qsfpplus1-2 list=LAN
add interface=qsfpplus1-3 list=LAN
add interface=qsfpplus1-4 list=LAN
add interface=qsfpplus2-1 list=LAN
add interface=qsfpplus2-2 list=LAN
add interface=qsfpplus2-3 list=LAN
add interface=qsfpplus2-4 list=LAN
add interface=sfp-sfpplus1 list=LAN
add interface=sfp-sfpplus2 list=LAN
add interface=sfp-sfpplus3 list=LAN
add interface=sfp-sfpplus4 list=LAN
add list=LAN
/interface wireless cap
set bridge=KIS discovery-interfaces=*42
/ip address
add address=172.12.100.150/24 interface=ether2 network=172.12.100.0
/ip dhcp-client
add interface=KIS
/ip dns
set servers=172.12.100.1
/ip firewall filter
add action=accept chain=forward connection-state=established,related
add action=fasttrack-connection chain=forward connection-state=\
established,related protocol=tcp
add action=fasttrack-connection chain=forward connection-state=\
established,related
add action=accept chain=input dst-address-type=local src-address-type=local
/ip route
add distance=1 gateway=172.12.100.1
/system clock
set time-zone-name=Asia/Almaty
/system routerboard settings
set boot-os=router-os