Thu Dec 02, 2021 2:30 pm
Thanks for your reply.
Channels from my OmniTik for Poland are as follow:
ranges: 2402-2482/b,g,gn20,gn40(20dBm)
2417-2457/g-turbo(20dBm)
5170-5250/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(23dBm)/passive,indoor
5170-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/dfs,passive,indoor
5250-5330/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(20dBm)/dfs,passive,indoor
5490-5710/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(27dBm)/dfs,passive
5190-5310/a-turbo(20dBm)/dfs
5180-5300/a-turbo(20dBm)/dfs
5520-5680/a-turbo(27dBm)/dfs,passive
5510-5670/a-turbo(27dBm)/dfs,passive
902-927/b,g,g-turbo,gn20,gn40(30dBm)
I'm guessing these 5490-5710/a,an20,an40,ac20,ac40,ac80,ac160,ac80+80(27dBm)/dfs,passive I should use, right?
Now, I'm a bit confused, because I have changed settings to Frequency mode: regulatory-domain/Country: Poland/Installation: outdoor and it works!
Yesterday I have changed the channels from 36 to 100 (my router Huawei works on 36 now - and I cannot see it - but this is not an issue).
Possibly, I made the changes to fast...
I'll let it work as it is for a few hours and will see that the end result will be.
There is one more thing I would like to change... Tx Power.
I would like to limit it as much as possible while working indoors...
I set the Tx Power Mode = 'all rates fixed' and Tx Power = 3 in Tx Power tab of wlan1. Is this the right place to change it?
Thanks