Hi. I bought 2 x cAP around 2 years ago and it was run on some LTE (crap one) network, roaming wasn't our biggest problem - the bandwidth was.
Recently, we got a chance to connect fiber and with a minimum option of 200mbits, roaming became a noticeable problem. My wife is not happy to say gently. When she moves around the house then whatsapp calls for example disconnect for long enough that the call is dropped.
I spent several evenings trying to find the optimum solution and always got back to almost 'default' home AP dual.
What can I do to try to improve it? The router is provided by ISP and it is some Halny model. If I get a MT router and set CAPsMAN on it, will it allow better roaming?
My config ATM - passwords removed. Both APs have almost the same settings as only IP range is different. The other one has 192.168.88.2-192.168.88.99 from memory.
# nov/27/2021 23:59:08 by RouterOS 6.47.8
# software id = ZC95-781T
#
# model = RBcAPGi-5acD2nD
# serial number = B9320B58F36D
/interface bridge
add admin-mac=C4:AD:34:15:5A:33 auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n basic-rates-a/g=12Mbps \
basic-rates-b="" country=poland disabled=no distance=indoors installation=\
indoor mode=ap-bridge name="WiFi 2.4" rate-set=configured ssid=JKJLS \
station-roaming=enabled supported-rates-a/g=\
12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps supported-rates-b="" \
wireless-protocol=802.11 wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40mhz-XX \
country=poland disabled=no distance=indoors installation=indoor mode=\
ap-bridge name="WiFi 5.0" ssid=JKJLS station-roaming=enabled \
wireless-protocol=802.11 wps-mode=disabled
/interface ethernet
set [ find default-name=ether1 ] name="Eth router"
set [ find default-name=ether2 ] disabled=yes
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface wireless channels
add band=2ghz-b/g/n frequency=2412 name=ch1 width=20
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa2-psk disable-pmkid=yes \
eap-methods="" mode=dynamic-keys supplicant-identity=MikroTik \
wpa-pre-shared-key=XXXXXXXXXXXXXXXXX wpa2-pre-shared-key=XXXXXXXXXXXXXXXXXXX
/ip hotspot profile
set [ find default=yes ] html-directory=flash/hotspot
/ip pool
add name=dhcp ranges=192.168.88.100-192.168.88.254
/ip dhcp-server
add address-pool=dhcp interface=bridge name=defconf
add address-pool=dhcp disabled=no interface=bridge name=dhcp1
/interface bridge port
add bridge=bridge comment=defconf interface="WiFi 2.4"
add bridge=bridge interface=ether2
add bridge=bridge interface="WiFi 5.0"
add bridge=bridge disabled=yes interface="Eth router"
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface detect-internet
set detect-interface-list=all lan-interface-list=all
/interface list member
add comment=defconf interface="Eth router" list=WAN
add interface=ether2 list=LAN
add interface="WiFi 5.0" list=LAN
add interface="WiFi 2.4" list=LAN
add interface=bridge list=LAN
/ip address
add address=192.168.88.5/24 interface=ether2 network=192.168.88.0
/ip dhcp-client
add comment=defconf disabled=no interface="Eth router"
/ip dhcp-server network
add address=192.168.1.0/24 comment=defconf gateway=192.168.1.3 netmask=24
add address=192.168.88.0/24 gateway=192.168.88.5 netmask=24
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.5 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=\
out,none out-interface-list=WAN
/ip route
add disabled=yes distance=1 gateway=192.168.1.1
/system clock
set time-zone-name=Europe/Warsaw
/system identity
set name="MikroTik"
/system routerboard mode-button
set enabled=yes on-event=dark-mode
/system scheduler
add interval=1d name=schedule1 policy=reboot start-date=dec/12/2020 start-time=\
04:00:00
/system script
add comment=defconf dont-require-permissions=no name=dark-mode owner=*sys \
policy=ftp,reboot,read,write,policy,test,password,sniff,sensitive,romon \
source="\r\
\n :if ([system leds settings get all-leds-off] = \"never\") do={\r\
\n /system leds settings set all-leds-off=immediate \r\
\n } else={\r\
\n /system leds settings set all-leds-off=never \r\
\n }\r\
\n "