Community discussions

MikroTik App
 
DubaiDrift
just joined
Topic Author
Posts: 5
Joined: Fri Nov 05, 2021 10:01 pm

CapsMan accidentially removed Cap1 Interface

Sun Nov 28, 2021 7:48 pm

Hi Guys,
i am relatively new to RouterOS, so please bear with my newbie question.
My configuration is as follows:

1 RB2011UiAS-2HnD
and 2 CAP ac connected to it managed via CapsMan. I have set up CapsMan with the following guide:
https://wiki.mikrotik.com/wiki/Manual:S ... tup_router

I now accidentially removed the first intercae Cap1 from the interface list in my capsman settings. I just hit the very small '-' on the very left of the table and gone it was ,-)

How do i get it back? The undo button didnt help.

Many thanks in advance.
 
holvoetn
Forum Guru
Forum Guru
Posts: 5325
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: CapsMan accidentially removed Cap1 Interface

Sun Nov 28, 2021 9:59 pm

Disable capsman and enable again ?
Reboot ?
 
gotsprings
Forum Guru
Forum Guru
Posts: 2087
Joined: Mon May 14, 2012 9:30 pm

Re: CapsMan accidentially removed Cap1 Interface

Sun Nov 28, 2021 10:09 pm

Delete the other radio in interfaces.
Then go to remote radios and delete it.

If you have create enable... It will re add the cap as a remote radio and add the radios to interface.

Who is online

Users browsing this forum: baragoon, morphema, Ponytred, robmaltsystems and 37 guests