Hi everyone!
I'm struggling a bit with this, but it should be quite simple...
This is what I want to achieve;
A home network that;
1. uses the hEX RB750Gr3 as DHCP server
2. the hEX RB750Gr3 uses the PiHole as it's only primary DNS
3. the hEX RB750Gr3 will have a couple of reserved IP address (Pihole Server, Home Assistant Server, Wifi IoT lights etc)
When I start the hEX RB750Gr3, I use the Quick settings and set the hEX RB750Gr3 IP adress to 10.0.0.1, the DHCP range to 10.0.0.100-10.0.0.254. I enable NAT filtering.
Then i reboot the hEX RB750Gr3. I then connect the switch.
Now the leases start to populate with my devices - Great!
The issue 1
But the devices are not given access to the internet.
- Why...?
Issue 2
- How can I properly set DNS requests to the Pihole. Lets say that the Pihole is assigned 10.0.0.31?
And later, how can I set the Pihole to be "local DNS Server" to be able to see the specific IP addresses that query the Pihole, instead of just seeing the hEX RB750Gr3 IP adress as querying?
I'm attaching a network schematic to further help You, help me.
All help is gratefully received