I can get two v7 routers to talk to each other so it is clearly an issue between v6 and v7 and my config. I am assuming v7 can create a PtP OSPF connection with a v6 router...
100.126.0.x are OSPF transit networks. 100.127.1.16 is the router loopback.
5009:
Code: Select all
/routing ospf instance
add name=default originate-default=never redistribute="" router-id=id-1
/routing ospf area
add instance=default name=backbone
/routing ospf interface-template
add area=backbone cost=10 dead-interval=10s hello-interval=5s networks=100.127.1.16/32 passive priority=1 retransmit-interval=3s
add area=backbone cost=50 dead-interval=10s hello-interval=5s networks=100.126.0.224/29 priority=1 retransmit-interval=3s type=ptp
Code: Select all
/routing ospf instance
set [ find default=yes ] router-id=100.127.1.5
/routing ospf interface
add cost=50 dead-interval=10s hello-interval=5s interface="vlan 3027 - Transit to Test BU" network-type=point-to-point retransmit-interval=3s
/routing ospf network
add area=backbone comment=Loopback network=100.127.1.5/32
add area=backbone comment="Test BU" network=100.126.0.224/29
I've tried changing the v7 interface-template to use the VLAN interface where the /29 is. No change. Never get an adjacent router.