I recently bought Mikrotik RouterBOARD RB5009UG+S+IN as a replacement for ZTE router from my ISP wanted to have control over my local network(s). They gave me ZTE gpon ont converter from fiber optic to metalic line which I then connected to ether1 on Mikrotik. It suppose to be 1 gbps. I reset mikrotik to empty config without default and tried to set up WAN interface setting my static IP from provider with following steps:
- 1. IP -> Addresses -> set static IP with mask /24 on ether1 (apply + ok)
2. Set IP routes -> 0.0.0.0/0 to Gateway IP
3. Added DNS servers from ISP
Thanks.