Community discussions

MikroTik App
 
RamG
just joined
Topic Author
Posts: 2
Joined: Tue Feb 12, 2019 6:31 am
Location: Nepal
Contact:

CAPSMAN Can't Brodcasting SSID

Sat Dec 04, 2021 6:18 pm

/interface bridge
add admin-mac=4C:5E:0C:E7:AF:2E auto-mac=no comment=defconf name=bridge
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-b/g/n channel-width=20/40mhz-XX \
disabled=no distance=indoors frequency=auto installation=indoor mode=\
ap-bridge ssid=. wireless-protocol=802.11
/caps-man security
add authentication-types=wpa-psk,wpa2-psk encryption=aes-ccm name=security1 \
passphrase=12345678
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/caps-man datapath
add bridge=bridge interface-list=all name=datapath1
/caps-man configuration
add channel.band=2ghz-g/n channel.control-channel-width=20mhz \
channel.extension-channel=disabled channel.save-selected=yes \
channel.tx-power=15 country=no_country_set datapath=datapath1 \
datapath.arp=local-proxy-arp datapath.bridge=bridge \
datapath.client-to-client-forwarding=no datapath.local-forwarding=no \
distance=indoors guard-interval=long hw-protection-mode=cts-to-self \
hw-retries=7 mode=ap name=cfg1 security=security1 ssid=SH2
/interface wireless security-profiles
set [ find default=yes ] authentication-types=wpa-psk eap-methods="" mode=\
dynamic-keys supplicant-identity=MikroTik wpa-pre-shared-key=google.com.
/ip pool
add name=default-dhcp ranges=192.168.88.10-192.168.88.254
/ip dhcp-server
add address-pool=default-dhcp disabled=no interface=bridge name=defconf
/caps-man access-list
add action=accept allow-signal-out-of-range=20s disabled=no signal-range=\
-84..120 ssid-regexp=""
add action=reject allow-signal-out-of-range=10s disabled=no signal-range=\
-120..-85 ssid-regexp=""
/caps-man manager
set ca-certificate=auto certificate=auto enabled=yes
/caps-man manager interface
add disabled=no
/caps-man provisioning
add action=create-dynamic-enabled master-configuration=cfg1
/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=wlan1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/ip address
add address=192.168.88.1/24 comment=defconf interface=bridge network=\
192.168.88.0
/ip dhcp-client
add comment=defconf disabled=no interface=ether1
/ip dhcp-server network
add address=192.168.88.0/24 comment=defconf dns-server=192.168.88.1 gateway=\
192.168.88.1
/ip dns
set allow-remote-requests=yes
/ip dns static
add address=192.168.88.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" \
connection-state=invalid
add action=drop chain=forward comment=\
"defconf: drop all from WAN not DSTNATed" connection-nat-state=!dstnat \
connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" \
ipsec-policy=out,none out-interface-list=WAN
/system clock
set time-zone-name=Asia/Kathmandu
/system identity
set name="hAP lite Router"
/system routerboard settings
set auto-upgrade=yes
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN

this is my config of capsman router. capsman ssid not brodcasting, anyone have any idea plz ?
You do not have the required permissions to view the files attached to this post.

Who is online

Users browsing this forum: No registered users and 28 guests