After watching Steveocee's video, I've managed to setup a HomeAssistant instance to be reachable from both local AND outside my local network.
The problem is that the port rules apply to every client on my network and do not restrict to the specific destination address I am pointing.(192.168.10.200)
All I wanted is port 8123 to be accessible for the HA instance only
Am I missing something?
Code: Select all
[admin@MikroTik] > /ip firewall nat print all
Flags: X - disabled, I - invalid, D - dynamic
0 ;;; HAIRPIN NAT
chain=srcnat action=masquerade src-address=192.168.10.0/24 dst-address=192.168.10.0/24 log=no log-prefix=""
1 chain=srcnat action=masquerade src-address=192.168.10.0/24 out-interface=pppoe-out1 log=no log-prefix=""
2 ;;; HomeAssistant
chain=dstnat action=dst-nat to-addresses=192.168.10.200 to-ports=8123 protocol=tcp dst-address-list=WAN-IP-2021 dst-port=8123 log=no log-prefix=""