Hi guys,
I have RB260 PoE switch. At this moment I have connected:
- port 2 to router (RB760), 20cm cable
- port 3 to modem 1 (SXT LTE6),
- port 4 to modem 2 (SXT LTE6)
- port 5 to modem 3 (some Huawei)
Power supply is standard (24V, 2,5A). Switch has default config (except password). PoE is set to "Auto".
When I turn on everything (there is just one power supply mentoned above):
- port 2 works fine (router is booting and working)
- ports 3-5 work or not (connected device looks like unpowered)
When I disconnect one of modems and connect it again - it boots up and it works or not (50/50%).
When I remove all modems except one (so I have only RB760 router and SXT modem connected) - nothing changes, single modem boots or not.
What is going on?