Hello
Probably after a failed firmware upgrade on R11e-LTE6 ,idon't see the "lte" interface.
Is a possibility of recovery R11e-LTE6?
under "system resource usb print" I see:
# DEVICE VENDOR NAME SPEED
0 1-0 Linux 3.3.5 ehci_hcd RB400 EHCI 480
1 1-1 MARVELL NZHA3 480
When I connect R11e-LTE6 card to a PC with linux, i see how the card is reset in loop(one looop in attachment) and the device number increases after each reset ?
Thanks and regards