I have MikroTik RB4011iGS+RM router.
7.1 does not show when I check for updates in PACKAGE LIST in WinBox.
How do I upgrade from 6.49.2 to 7.1?
How to upgrade from 6.49.2 to 7.1
Last edited by mikrotak on Wed Dec 29, 2021 5:37 am, edited 1 time in total.
-
-
DejanAgain
just joined
- Posts: 10
- Joined:
Re: How to upgrade from 6.49.2 to 7.1
Any update is working when you download package, upload to ruter and restart. I guess 7.1 will do same, but I don't know how license will work, you should specify which hardware and which initial version was for someone who may help then
Re: How to upgrade from 6.49.2 to 7.1
First I would check if version is ok on system:
and routerboard:
Current firmware and upgrade firmware should be in the same version and also the same version of your routeros
Then you have to say that you want to change from 6 channel to 7:
and usuall upgrade:
and after reboot check again the installation and upgrade the firmware.
Best Regards,
Diego
Code: Select all
] > system/check-installation
status: installation is ok
Code: Select all
system/routerboard/print
routerboard: yes
model: XXXX
revision: YYY
serial-number: BBBBBB
firmware-type: CCCCCC
factory-firmware: 6.47.10
current-firmware: 6.49.2
upgrade-firmware: 6.49.2
Then you have to say that you want to change from 6 channel to 7:
Code: Select all
> system package update set channel=upgrade
Code: Select all
>] > system package update check-for-updates
channel: upgrade
installed-version: 6.49.2
latest-version: 7.1.1
status: New version is available
] > system package update download
] > system reboot
Best Regards,
Diego
Re: How to upgrade from 6.49.2 to 7.1
Choose channel to "upgrade" to switch from 6.xx tree to 7.xx and after that you'll see new long-term, stable, testing trees. Choose stable or long-term and go. Don't forget to create binary backup before any upgrade to be able to fully recover if anything would go wrong.
Re: How to upgrade from 6.49.2 to 7.1
Thanks!
That worked!
That worked!
Re: How to upgrade from 6.49.2 to 7.1
It's must be the version 6.49.2?First I would check if version is ok on system:and routerboard:Code: Select all] > system/check-installation status: installation is okCurrent firmware and upgrade firmware should be in the same version and also the same version of your routerosCode: Select allsystem/routerboard/print routerboard: yes model: XXXX revision: YYY serial-number: BBBBBB firmware-type: CCCCCC factory-firmware: 6.47.10 current-firmware: 6.49.2 upgrade-firmware: 6.49.2
Then you have to say that you want to change from 6 channel to 7:and usuall upgrade:Code: Select all> system package update set channel=upgradeand after reboot check again the installation and upgrade the firmware.Code: Select all>] > system package update check-for-updates channel: upgrade installed-version: 6.49.2 latest-version: 7.1.1 status: New version is available ] > system package update download ] > system reboot
Best Regards,
Diego
Re: How to upgrade from 6.49.2 to 7.1
Hello,
Starting version was 6.49.2 cause is the OP request.
If you have lower version I would first do upgrades following near releases First long-term channel if needed, then stable and then upgrade from 6 to 7.
In all upgrade steps check upgrade status and firmware upgrade.
Best Regards,
Diego
Starting version was 6.49.2 cause is the OP request.
If you have lower version I would first do upgrades following near releases First long-term channel if needed, then stable and then upgrade from 6 to 7.
In all upgrade steps check upgrade status and firmware upgrade.
Best Regards,
Diego
Who is online
Users browsing this forum: No registered users and 51 guests