Allow me to start by describing the network. This is an apartment complex setup (entire complex). WAN is Core(CCR1036-12G-4S), there is one Relay (RB2011UiAS), each building has BLDG # for its router name(a CRS125-24G-1S-2HnD), Each unit has Unit# for its hAP AC name (RB952Ui-5ac2nD).
Each Building has individual radios as the entire site is not hardwired. Radios are 60ghz with 5ghz fail over. Buildings 2, 8, and 12 have relay radios, providing hops to buildings without line of site to Central radio.
Ip rules follow basic. Bldg 1 gets IP 192.168.10.1, Bldg 2 gets IP 192.168.10.2, etc.
Currently each building is running DHCP on its own router, handing out (192.168.BLDG.xxx)
Routes as follows
Core->Central->BLDGs 1,2,5,8,12, 13, 14
Core->Central->Bldg2->Bldgs 3,4
Core->Central->Bldg8->Bldg 9,10
Core->Central->Bldg 12->Bldgs 6,7,11
I need to correct the issue where clients are unable to connect via xbox due to strict, double nat issues.
Please advise.