Router's model: 912UAG-5HPnD
Steps to reproduce the issue: run the ping command on any address
When I ping any address, it has 2 output variations:
one that doesn't fit with the documentation. it has a line at the start: Columns: SEQ, HOST, SIZE, TTL, TIME, and without a line at the end
one that is the same as in the documentation - without the first line and with a line at the end summarising the results, the examples below were in the same order as presented and 1 right after the other
Code: Select all
[admin@MikroTik] > ping 8.8.8.8 count=3
Columns: SEQ, HOST, SIZE, TTL, TIME
SEQ HOST SIZE TTL TIME
0 8.8.8.8 56 112 209ms436us
1 8.8.8.8 56 112 80ms991us
2 8.8.8.8 56 112 110ms384us
[admin@MikroTik] > ping google.com count=3
SEQ HOST SIZE TTL TIME STATUS
0 172.217.18.46 56 112 72ms403us
1 172.217.18.46 56 112 81ms170us
2 172.217.18.46 56 112 100ms183us
sent=3 received=3 packet-loss=0% min-rtt=72ms403us avg-rtt=84ms585us max-rtt=100ms183us
[admin@MikroTik] > ping google.com count=3
Columns: SEQ, HOST, SIZE, TTL, TIME
SEQ HOST SIZE TTL TIME
0 172.217.18.46 56 112 717ms425us
1 172.217.18.46 56 112 89ms601us
2 172.217.18.46 56 112 105ms90us
[admin@MikroTik] > ping 1.1.1.1
SEQ HOST SIZE TTL TIME STATUS
0 1.1.1.1 56 56 66ms101us
1 1.1.1.1 56 56 61ms432us
2 1.1.1.1 56 56 159ms398us
3 1.1.1.1 56 56 421ms222us
4 1.1.1.1 56 56 70ms445us
sent=5 received=5 packet-loss=0% min-rtt=61ms432us avg-rtt=155ms719us max-rtt=421ms222us
[admin@MikroTik] > ping 1.1.1.1 count=5
Columns: SEQ, HOST, SIZE, TTL, TIME
SEQ HOST SIZE TTL TIME
0 1.1.1.1 56 56 141ms812us
1 1.1.1.1 56 56 450ms570us
2 1.1.1.1 56 56 63ms748us
3 1.1.1.1 56 56 58ms919us
4 1.1.1.1 56 56 614ms545us
[admin@MikroTik] > ping yahoo.com count=5
Columns: SEQ, HOST, SIZE, TTL, TIME
SEQ HOST SIZE TTL TIME
0 74.6.143.26 56 46 185ms393us
1 74.6.143.26 56 46 464ms240us
2 74.6.143.26 56 46 425ms958us
3 74.6.143.26 56 46 386ms774us
4 74.6.143.26 56 46 347ms43us