My network is
192.168.1.0/24 = DATA = bridge1
192.168.2.0/24 = VOIP = VOIP (vlan tag2)
Internet = pppoe-out1 = adsl up/down (900k/11LM)
this is my configuration :
Code: Select all
/interface bridge port
add bridge=bridge1 ingress-filtering=no interface=ether2
add bridge=bridge1 ingress-filtering=no interface=ether3
add bridge=bridge1 ingress-filtering=no interface=ether4
add bridge=bridge1 ingress-filtering=no interface=ether5
add bridge=bridge1 ingress-filtering=no interface=wlan1
add bridge=bridge1 ingress-filtering=no interface=wlan2
/interface list member
add interface=bridge1 list=LAN
add interface=VOIP list=LAN
add interface=pppoe-out1 list=WAN
port used for sig = 5060 and for RTP = 10000-65000
this is my config for adress list
Code: Select all
/ip firewall address-list:
add address=aaa.bbbb.com list="VOIP_SBC"
add address=xxx.yyyy.com list="VOIP_SBC"
Code: Select all
/ip firewall mangle
add action=mark-connection chain=forward dst-address-list="VOIP_SBC" dst-port=5060 in-interface=VOIP new-connection-mark=SIP-SIGNALING-IPCX-Conn passthrough=yes protocol=\
udp
add action=mark-connection chain=forward dst-address-list="VOIP_SBC" dst-port=5060 in-interface=VOIP new-connection-mark=SIP-SIGNALING-TRUNK-Conn passthrough=yes protocol=\
udp
add action=mark-packet chain=forward connection-mark=SIP-SIGNALING-Conn new-packet-mark=SIP-SIGNALING-IPCX-Packet passthrough=yes
add action=mark-packet chain=forward connection-mark=SIP-SIGNALING-TRUNK-Conn new-packet-mark=SIP-SIGNALING-TRUNK-Packet passthrough=yes
add action=mark-connection chain=forward dst-address-list="VOIP_SBC" dst-port=10000-65000 new-connection-mark=SIP-RTP-IPCX-Conn passthrough=yes protocol=udp
add action=mark-packet chain=forward connection-mark=SIP-RTP-IPCX-Conn new-packet-mark=SIP-RTP-IPCX-Packet passthrough=yes
add action=mark-packet chain=forward connection-mark=SIP-RTP-TRUNK-Conn new-packet-mark=SIP-RTP-TRUNK-Packet passthrough=yes
add action=mark-connection chain=forward dst-address-list="VOIP_SBC" dst-port=10000-65000 new-connection-mark=SIP-RTP-TRUNK-Conn passthrough=yes protocol=udp
Code: Select all
/queue tree
add max-limit=850k name="Total UPLOAD" parent=global
add limit-at=10k max-limit=10k name="SIP Signalling up" packet-mark=SIP-SIGNALING-IPCX-Packet,SIP-SIGNALING-TRUNK-Packet parent="Total UPLOAD" priority=7
add limit-at=200k max-limit=200k name="SIP RTP up" packet-mark=SIP-RTP-IPCX-Packet,SIP-RTP-TRUNK-Packet parent="Total UPLOAD" priority=6
add max-limit=750k name="Other Traffic" packet-mark=no-mark parent="Total UPLOAD"
What's wrong on my configuration for VOIP packet is 100% prioritize of all other packet and do not add jitter/packet loss ?
Thanks for your reply and excuse my English …