Hi,

I watched this tutorial on youtube:
https://www.youtube.com/watch?v=YLtGQAQ8iS0

I still haven't understood where the guy got the Mikrotik switch image from, since he only talked about such a Raw Disk image in the Cloud Hosted Router menu on Mikrotik's software download webpage in his previous tutorial about virtualizing routerOS in GNS3.

Could you help figure it out please?
Thanks

He is using CHR image, not SWOS or similar. He is explaining Bridge configuration for CRS3xx but using a CHR image.

From GNS3 you can download CHR image from their repositories

He is using CHR image, not SWOS or similar. He is explaining Bridge configuration for CRS3xx but using a CHR image.

From GNS3 you can download CHR image from their repositories

I download and installed in GNS3 the chr-6.49.2.img and it works, but I also need the same "switch" menu in Winbox I see for my real hap ac2

I download and installed in GNS3 the chr-6.49.2.img and it works, but I also need the same "switch" menu in Winbox I see for my real hap ac2

Switch menu only is shown in devices that support it. CHR has no switch-chip inside, so you can't simulate it... and you won't see the menu option in Winbox.

I download and installed in GNS3 the chr-6.49.2.img and it works, but I also need the same "switch" menu in Winbox I see for my real hap ac2

Switch menu only is shown in devices that support it. CHR has no switch-chip inside, so you can't simulate it... and you won't see the menu option in Winbox.

ah ok. Got it.

Thanks

Does CHR have wireless capability or just routing?
ANy MT Device can be used as a switch and most useful with bridge vlan filtering when using vlans.