I am trying to setup OSPF between two sites which are connected via a GRE tunnel.
site A with range 192.168.1.0/24
Site B with range 192.168.190.0/24
From side b i am able to ping side a but not vice versa
Code: Select all
/routing ospf instance
set [ find default=yes ] router-id=10.255.255.1
/routing ospf interface
add interface="OSPF Loopback"
add interface=bridge-local
/routing ospf network
add area=backbone network=100.124.124.0/24
add area=backbone network=10.255.255.1/32
add area=backbone network=192.168.1.0/24
Code: Select all
frr.conf vtysh.conf
[21.05.2-RELEASE][admin@xxx]/var/etc/frr: cat frr.conf
##################### DO NOT EDIT THIS FILE! ######################
###################################################################
# This file was created by an automatic configuration generator. #
# The contents of this file will be overwritten without warning! #
###################################################################
!
frr defaults traditional
hostname ****
password *****
service integrated-vtysh-config
!
ip router-id 10.255.255.2
!
interface ix0.3502
ip ospf area 0.0.0.0
interface gre0
ip ospf bfd
ip ospf area 0.0.0.0
!
router ospf
ospf router-id 10.255.255.2
redistribute connected metric 5 metric-type 1
neighbor 10.255.255.1
!
line vty
!
end