do you know any poe out router to replace mikrotik hap ac3? (Wisp)
Need bridge Mode..
Thanks
You ask in the MikroTik forum , suggestion for a non MikroTik device ?No mikrotik, wifi is slow
Oh but I respectfully disagree there.Our ISP gives us internet through Mikrotik Cube60 AC 300/100Mbs.
hAP AC3 is not capable of moving this speed in noisy environments.
While I can get around 700M per seconds on WiFi 6 from other vendors...Oh but I respectfully disagree there.Our ISP gives us internet through Mikrotik Cube60 AC 300/100Mbs.
hAP AC3 is not capable of moving this speed in noisy environments.
I can easily push close to 500Mb (sometimes more) using hAP AC3 using 5Ghz on my internal network.
So 300/100 shouldn't be a problem either (I only have 200/20 at home to the outside world).
I do agree it required some careful monitoring from my side which channels to use but it's not rocket science either.
Especially wifiwave2 should help a lot.
Sure you can but that does not take away the fact hAP AC3 is more then capable to handle 300/100 which OP claims to be a problem right now.While I can get around 700M per seconds on WiFi 6 from other vendors...
If he used the standard drivers or caps-man... 300 is a gift.Sure you can but that does not take away the fact hAP AC3 is more then capable to handle 300/100 which OP claims to be a problem right now.While I can get around 700M per seconds on WiFi 6 from other vendors...
It is not the device. It's the config which most likely is the problem.