Community discussions

MikroTik App
 
AMeador1
just joined
Topic Author
Posts: 22
Joined: Tue Jan 04, 2022 2:13 am

Barrel connector specs for RB4011iGS+RM

Tue Mar 01, 2022 3:56 pm

I want to power the RB4011iGS+RM router with the DC power connector from a DC power plant. I would rather not cut the barrel connector off of the supplied PSU - does anyone have the specs I need for this connector so I can order them for this purpose?

Thanks!

[Edit] I found in the user manual that is says it is a 5.5 mm outside and 2 mm inside connector - female, pin positive plug. But, to clarify - when searching sources for this - I am seeing MANY 5mm outside with 2.1mm inside connectors (and so far no 2mm). Can anyone confirm if these are a match (2mm vs 2.1mm) or do I need to make sure it is 2mm exactly?
 
Elans
Member Candidate
Member Candidate
Posts: 131
Joined: Wed Apr 18, 2018 12:41 pm

Re: Barrel connector specs for RB4011iGS+RM

Mon Mar 07, 2022 10:12 am

Hello,
Inner positive, outer negative.
Image

Who is online

Users browsing this forum: No registered users and 28 guests