Hi, I am having trouble setting up the following:
Ether 1 = ISP 1 ( Distance 2)
Ether 2 = ISP 2 ( Distance 3)
Ether 3 = ISP 3 ( Distance 1 but only used when ISP 1 and 2 are down, and I need to plug a 5G portable modem on Ether3)
Ether 4 = LAN 1 ( DHCP Server for 192.168.10.0/24)
Ether 5 = ISP 4 ( IP = 192.168.1.10, DHCP Client enabled, and I need this one just to access the devices connected on another router.)
pptp1 = Connection between my company and this client.
The problem is, I need my company and the devices from Ether4 to access the devices connected on Ether5
My pptp works like a charm, and I can access the devices conected on Ether4.
How can I acess the devices of Ehter4 from my company?
The explanation for all this:
My company works as remote concierge, and my headquarters need access to the devices conected on my client's location, it is a closed rack, only my company have access, but my client requested that some of the IP cameras from his internal network was used on my system. That's why I need to comunicate with his network.