Hi,
Just wondering if someone could confirm these logs please.
Does this show a potential fault with the line. It was installed for a couple of weeks and but then started to have more and more disconnects as below. The bit which confuses me is ET2
11:06:35 pppoe,ppp,info pppoe-out1: initializing...
11:06:35 pppoe,ppp,info pppoe-out1: connecting...
11:06:38 interface,info ether1 link down
11:06:38 pppoe,ppp,info pppoe-out1: terminating...
11:06:38 interface,info ether2 link down
11:06:38 pppoe,ppp,info pppoe-out1: disconnected
11:06:38 pppoe,ppp,info pppoe-out1: initializing...
11:06:38 pppoe,ppp,info pppoe-out1: connecting...
11:06:40 interface,info ether1 link up (speed 100M, full duplex)
11:06:41 interface,info ether2 link up (speed 1G, full duplex)
11:06:48 pppoe,ppp,info pppoe-out1: terminating... - disconnected
11:06:48 pppoe,ppp,info pppoe-out1: disconnected
11:06:48 pppoe,ppp,info pppoe-out1: initializing...
11:06:48 pppoe,ppp,info pppoe-out1: connecting...
11:06:49 interface,info ether1 link down
11:06:49 pppoe,ppp,info pppoe-out1: terminating...
11:06:49 interface,info ether2 link down
11:06:49 pppoe,ppp,info pppoe-out1: disconnected
11:06:49 pppoe,ppp,info pppoe-out1: initializing...
11:06:49 pppoe,ppp,info pppoe-out1: connecting...
11:06:51 interface,info ether1 link up (speed 100M, full duplex)
11:06:52 pppoe,ppp,info pppoe-out1: authenticated
11:06:52 pppoe,ppp,info pppoe-out1: connected
11:06:52 interface,info ether2 link up (speed 1G, full duplex)
Eth1 is to the VDSL modem and Eth2 is LAN. Why is that bouncing if it were a dodgey line?
I have updated the firmware to latest and set the timeout to 999 but any other advice would be greatly appreciated.
Thanks.