Community discussions

MikroTik App
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 852
Joined: Thu Dec 11, 2014 8:53 am

v7.2 is released!

Tue Apr 05, 2022 9:43 am

RouterOS version 7.2 has been released in "v7 stable" channel!

Before an upgrade:
1) Remember to make backup/export files before an upgrade and save them on another storage device;
2) Make sure the device will not lose power during upgrade process;
3) Device has enough free storage space for all RouterOS packages to be downloaded.

What's new in 7.2 (2022-Mar-31 12:11):

*) api - accept "Content-Type" with specified charset;
*) arm - fixed "auto" CPU frequency setting;
*) arm - fixed "shutdown" command on hAP ac^2;
*) arm64 - improved Watchdog initiated reboot reason reporting;
*) arm64 - improved low disk space handling condition on upgrade;
*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
*) backup - fixed automatic backup generation when resetting configuration;
*) backup - fixed cloud backup's creation timezone;
*) bgp - added BGP advertisements display (requires output.keep-sent-attributes to be set);
*) bgp - do not export default BGP values;
*) bgp - fixed VPNv4 route sending to remote peer;
*) bgp - fixed link-local iBGP address selection;
*) bgp - fixed network advertisement from address-lists after reboot;
*) bgp - fixed routing table and BGP configuration order in export;
*) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
*) bluetooth - allow to export device, advertiser and scanner configuration;
*) bluetooth - disable scanning by default;
*) bridge - added fast-path and inter-VLAN routing FastTrack support when vlan-filtering is enabled;
*) bridge - fixed FastPath when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
*) bridge - fixed PPPoE packet forwarding when using "use-ip-firewall-for-pppoe" setting;
*) bridge - fixed bridge filter and NAT rules on ARM64 and TILE devices;
*) bridge - fixed destination NAT when using "use-ip-firewall" setting;
*) bridge - fixed filter and NAT "set-priority" action;
*) bridge - fixed filter and NAT "set-priority" on ARM64 devices;
*) bridge - fixed filter rules when using interface lists;
*) bridge - fixed firewall "ingress-priority" matcher and "new-priority=from-ingress" action settings from VLAN tagged frames;
*) bridge - fixed priority tagged frame forwarding when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
*) capsman - improved stability when running background scan on CAP;
*) capsman - improved system stability when processing CAP packet by Mangle;
*) ccr2004 - improved PCI timeout handling on CCR2004-1G-2XS-PCIe;
*) ccr2004 - improved system stability on CCR2004-12S+2XS;
*) certificate - allow to choose digest algorithm for CSR signing;
*) certificate - made "fingerprint" parameter read-only;
*) chr - improved system stability when writing into memory;
*) chr - temporarily suspended downgrade to RouterOS v6;
*) clock - properly notify all instances about time changes;
*) conntrack - properly detect helper status;
*) console - fixed "print" command with additional "where" condition;
*) console - improved console responsiveness when processing received characters;
*) console - made "password" parameter mandatory when creating a new user;
*) console - properly erase CLI history after configuration reset;
*) console - updated copyright notice;
*) crs1xx/2xx - fixed static switch host addresses after link down;
*) crs1xx/2xx - ignore static bridge host addresses (switch unicast-fdb should be used instead);
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) crs3xx - fixed QSFP+ interface LEDs;
*) crs3xx - fixed watchdog timer functionality;
*) crs3xx - improved SFP+ interface linking after reboot for CRS312 device;
*) crs3xx - improved maximum allowed ACL rule calculation;
*) crs3xx - improved system stability when creating many ACL rules on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf - made "192.168.188.1/24" the default LAN IP address for LTE CPE devices;
*) dhcp-server - fixed DHCP Option decimal value parsing;
*) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
*) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) dhcpv4-server - allow adding comments;
*) dhcpv4-server - remove dynamic leases when server configuration is removed;
*) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
*) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
*) dhcpv6 - added VRF support;
*) dot1x - added "server-fail-vlan-id", "guest-vlan-id" and "reauth-timeout" settings for dot1x server;
*) dot1x - added "src-address", "src-mac-address" and "src-port" settings for dynamic switch rules;
*) dot1x - added NAS-Port-ID attribute for RADIUS Access-Request;
*) dude - fixed The Dude client compatibility with RouterOS v7;
*) dude - fixed The Dude compatibility with ARM64;
*) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
*) firewall - improved available port lookup for source NAT when free port range is exhausted;
*) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
*) hotspot - fixed login page over HTTPS;
*) hotspot - fixed memory leak on every web page loading;
*) hotspot - fixed web page loading using HTTPS;
*) ike2 - ignore "INITIAL-CONTACT" payload on responder when "send-initial-contact" is disabled;
*) interface - fixed minor memory leak when interface or connected route is changed;
*) ipsec - added hardware acceleration support for CCR2116;
*) ipsec - fixed "identities" menu emptying after RouterOS upgrade/reboot;
*) ipv6 - do not add duplicate dynamic prefix when static already exists;
*) ipv6 - fixed "retransmissit-interval" unit value;
*) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;
*) l2tp - fixed CHAP challenge packet processing over IPsec;
*) l2tp - improved service stability when disabling L2TP server with connected clients;
*) l2tp - improved system stability when processing L2TP control messages;
*) l3hw - added HW offloaded FastTrack support for inter-VLAN routing;
*) l3hw - fixed HW offloaded NAT;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
*) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
*) l3hw - fixed bonding source MAC address;
*) l3hw - fixed default route offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
*) l3hw - improved routing table offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
*) l3hw - improved system stability when using 7 or more VLAN interfaces;
*) led - fixed LED behavior on Audience;
*) led - reduced LTE signal LED range to -70;
*) leds - fixed user LED on RB750Gr3;
*) log - added warning message when connection tracking table is full;
*) log - include message also in e-mail body;
*) lora - fixed "antenna-gain" parameter unit;
*) lte - add IPv6 address on interface as well;
*) lte - added 3 APN profile support and APN name re-using on R11e-LTE6;
*) lte - added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
*) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
*) lte - added class based support for configless RNDIS LTE modems;
*) lte - added support for Uplink CA reporting;
*) lte - changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
*) lte - do not loose "band" configuration after reboot on Chateau 5G;
*) lte - do not show external antenna selector on devices that does not support it;
*) lte - enabled multi-APN and name re-use support for Chateau;
*) lte - expose diagnostics channel for all modems;
*) lte - fixed "monitor" command to not report old info;
*) lte - fixed AT command response handling on R11e-LTE;
*) lte - fixed IPv6 address addition after startup on R11e-LTE6;
*) lte - fixed MBIM modem reset on AT timeout;
*) lte - fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
*) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
*) lte - fixed possible timeouts when sending SMS in LTE only mode on R11e-LTE;
*) lte - fixed support for Sierra MC7710;
*) lte - fixed support for Telit 960;
*) lte - improved stability on "+EGMR" response in MBIM mode;
*) lte - improved stability when modem disappears during firmware upgrade;
*) lte - improved support for sending/receiving SMS in LTE only mode on R11e-LTE6;
*) lte - made "no" the default value for "use-network-apn" parameter;
*) lte - properly recognize MBIM modem in USB port as LTE on Chateau 5G;
*) ntp - allow adding duplicate server address if dynamic entry exists;
*) ntp - fixed multicast mode support;
*) ntp - improved IPv6 address support;
*) ntp - improved service stability when none of the NTP servers are reachable for a while;
*) ntp - improved source address usage for reply packets;
*) ntp - print log change time with time-zone applied;
*) ospf - added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
*) ospf - convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
*) ospf - fixed MD5 authentication;
*) ospf - fixed NBMA hello's not being sent if priority is set to 0;
*) ospf - fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
*) ospf - fixed default type-3 LSA's not being injected to stub area;
*) ospf - fixed distance if "originate-default" is set to "always";
*) ospf - fixed external LSA not updating after prefix netmask change;
*) ospf - fixed incorrect LSA types when changing area types;
*) ospf - fixed neighbor election failure;
*) ospf - fixed neighbor stuck in ExStart;
*) ospf - fixed simple authentication;
*) ospf - general stability improvements;
*) ospf - improved DB retransmit logging;
*) ospf - improved logging;
*) ospf - improved overall stability;
*) ospf - improved stability for very large LSDB;
*) ospf - improved stability on OSPFv3 instance disabling;
*) ospf - improved stability when DR goes down;
*) ospf - improves stability when handling looped back OSPF packets;
*) ospf - properly set VRF for gateway;
*) ospf - send notifies for neighbors;
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) ovpn - improved UDP session handling;
*) ovpn - improved memory allocation on Tile in "ethernet" mode;
*) ovpn - improved system stability in high load scenarios;
*) pimsm - fixed menu prints;
*) pimsm - general stability improvements;
*) poe - fixed PoE driver loading on CRS354-48P-4S+2Q+;
*) poe - update PoE firmware only on devices that support it;
*) ppp - added "comment" option for PPPoE servers;
*) ppp - fixed AT+CPIN chat when SIM PIN is specified;
*) ppp - improved stability when handling large amount of connections simultaneously;
*) ppp - show local and remote IPv6 addresses (CLI only);
*) pppoe - added option to configure "host-uniq" parameter;
*) pppoe - added option to ignore PADI messages with empty service name;
*) pppoe - use default MTU of 1492;
*) pptp - added insecure connection warning;
*) pptp - show insecure connection warning on dynamic interfaces;
*) qsfp - correctly display auto-negotiation status;
*) queue - fixed queued IPv6 traffic considered as "invalid" by Firewall;
*) queue - improved system stability when processing traffic;
*) queue - improved system stability when using more than 255 unique packet marks;
*) rb4011 - fixed jumbo frame processing on SFP+ port when using 1G module;
*) rip - added logging;
*) rip - fixed route metrics;
*) rip - fixed route redistribution;
*) rip - use nexthop with interface;
*) route - allow OSPF and RIP redistributed routes to be matched by routing filters;
*) route - fixed "min-prefix" configuration when set to 0;
*) route - fixed "suppress-hw-offload" update;
*) route - fixed "table" menu emptying after RouterOS upgrade;
*) route - fixed BGP atomic aggregate value;
*) route - fixed ECMP load balancing in FastPath;
*) route - fixed ECMP route removal;
*) route - fixed route addition to VRF from BGP;
*) route - fixed router's LSA for PTP networks;
*) route - fixed routing configuration export on SMIPS devices;
*) route - general stability improvements;
*) route - improved routing table print speed;
*) route - show OSPF and RIP specific attributes in "/routing route" table;
*) route-filter - fixed "return" action;
*) route-filter - fixed complex matchers with "|| or and &&";
*) route-filter - fixed incorrect invert-match configuration upgrade from RouterOS v6;
*) route-filter - fixed range conversion after update from RouterOS v6;
*) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
*) route-filters - fixed possible address list race condition and memory leak;
*) route-filters - renamed "*-set" to "*-list";
*) routerboard - fixed "ether2" interface presence on some RBwAPGR devices;
*) routerboard - fixed WPS button functionality on Audience;
*) routing - added PCAP viewer tool for BGP advertisements debugging purposes;
*) routing-filter - fixed "bgp-*-communities-empty" matcher;
*) rpki - made RPKI verify non-strict, introduces new state "unverified";
*) rpki - show expire timer;
*) sfp - improved SFP module detection on CRS106 and CRS112;
*) smb - fixed SMB2.0 disk size reporting;
*) smips - improved RAM allocation;
*) sms - increased "at-chat" timeout when sending SMS;
*) snmp - added SFP vendor name to optical table;
*) snmp - added support for "ipv6AddrPrefixTable" and "ipv6RouteNumber" OID's;
*) snmp - allow two level nesting for vlan, bonding speed query;
*) socks - fixed SOCKS5 support;
*) ssh - fixed forwarding with IPv6 link-local addresses;
*) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
*) supout - added "port-controller" bridge section;
*) switch - added "rx-overflow" counter for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) switch - fixed port-isolation misconfiguration detection when using multiple switches;
*) switch - improved packet forwarding with enabled "cpu-flow-control" setting between different rate interfaces for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
*) switch - improved switch chip initialization process on bootup for CCR2004-16g-2s+ devices;
*) switch - properly limit maximum number of switch rules to 256 on RB5009;
*) system - fixed license loss on some RB1100Dx4 and RB4011 devices;
*) tr069-client - accept 200-299 codes for HTTP diagnostics;
*) tr069-client - added support for 5G band configuration;
*) tr069-client - added support for wireless "skip-DFS" configuration;
*) tr069-client - added support for wireless client uptime reporting;
*) tr069-client - fixed RPC download of "3 Vendor Configuration File" with branding package;
*) traffic-flow - do not handle NAT events when "nat-events" is disabled;
*) traffic-generator - fixed transmit speed for multiple asymmetric streams;
*) upgrade - improved 404 error handling when checking for new versions;
*) upgrade - improved downgrade prompt message;
*) ups - fixed UPS support;
*) usb - fixed display of incorrect port count for USB serial ports;
*) user - removed obsolete "tikapp" policy;
*) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
*) vlan - fixed improper VLAN priority addition for routed packets;
*) vxlan - allow unsetting "group" and "interface" properties;
*) vxlan - fixed running state after reboot when using "interface" and "group" settings;
*) webfig - do not show side menu if WebFig is disabled by skin;
*) webfig - fixed default configuration popup presence;
*) webfig - fixed user policy lookup for skin designer;
*) wifiwave2 - added "client-isolation" feature;
*) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
*) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
*) winbox - added "Disconnect Notify" checkbox to "Interface/OVPN Client" menu;
*) winbox - added "Freq. Usage" and "Scan" buttons for WifiWave2 interfaces;
*) winbox - added "Ignore Missing" selector to "System/Packages" menu;
*) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
*) winbox - added "Routing Table" parameter for IPv6 routes;
*) winbox - added "TLS Version" parameter for "Interface/OVPN";
*) winbox - added "VPN" tab to "Routing/BGP" menu;
*) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
*) winbox - added "VRF" parameter to "IP/Services" menu;
*) winbox - added "comment" parameter to "User Manager/Users" menu;
*) winbox - added "host-uniq" parameter to PPPoE client interface;
*) winbox - added MLAG support;
*) winbox - added SHA256 and SHA512 "Auth" values for OVPN menu's;
*) winbox - added ZeroTier support;
*) winbox - added explicit "Upload" and "Download" names for "Bucket Size" parameters under "Queues" menu;
*) winbox - added interface list support for "IP/Traffic Flow" menu;
*) winbox - added local/remote CPU load parameters for "Bandwidth Test";
*) winbox - added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;
*) winbox - added missing "accounting", "interim-update" and "radius-password" parameters under "IP/DHCP Server" menu;
*) winbox - added support for "Tool/Speedtest" menu;
*) winbox - added support for W60G align tool;
*) winbox - allow adding more than 100 tagged/untagged interfaces under "Bridge/VLAN" menu;
*) winbox - allow configuring "VTEP" under "Interface/VXLAN" menu;
*) winbox - allow setting "Interface" parameter for 100G LED types;
*) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
*) winbox - do not require "name" and "file name" parameters for certificate import/export;
*) winbox - do not show "Antenna Scan" button on devices that do not support it;
*) winbox - do not show connection tracking table if it has more than 10000 entries;
*) winbox - fixed "00:00:00" time printing;
*) winbox - fixed "Switch" menu on Chateau devices;
*) winbox - fixed "action" field in "IP/Web Proxy/Access" menu;
*) winbox - fixed "expires-after" certificate parameter value;
*) winbox - fixed CHR License renewing process;
*) winbox - fixed address list type parameters in "Routing" menu;
*) winbox - fixed content filtering in "Tools/Packet Sniffer/Packets" menu;
*) winbox - fixed entry order in "Tools/Packet Sniffer/Packets" menu;
*) winbox - fixed error message when adding NTH rule with "0" value;
*) winbox - fixed minor typo under "LTE" interface menu;
*) winbox - fixed switch related settings for MT7621 switch chip (hEX, hEX S, RBM33G, RBM11G, LtAP);
*) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
*) winbox - made "Routing Filters/Rules" table sortable;
*) winbox - made OSPF interface type names consistent between CLI and GUI;
*) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
*) winbox - moved IPv4 and IPv6 "Rules" menus under "Routing" menu;
*) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
*) winbox - properly save "IPv6/Settings" menu in session file;
*) winbox - properly show "v" flag instead of "y" under "IP/Route" menu;
*) winbox - properly update ethernet auto negotiation status on CHR;
*) winbox - properly update server list under "System/NTP Client/Servers" menu;
*) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
*) winbox - renamed "MBPS" to "Mbps" value unit name in "Tools/Traffic Generator" menu;
*) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
*) winbox - report local terminal session as "local" instead of "telnet";
*) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
*) winbox - require non empty "Packet Mark" value under "Queues" menu;
*) winbox - show "H" flag for offloaded connections in "IP/Firewall/Connections" menu;
*) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
*) winbox - show "Routes" column by default under "PPP/Secrets" menu;
*) winbox - show "System/Health/Settings" only on boards that have configurable values;
*) winbox - show "System/SwOS" menu only on boards that have dual boot;
*) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
*) winbox - sort "Address List" parameter values alphabetically in "IP/DHCP Server/Leases" menu;
*) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
*) winbox - use "total" as default value for "Tools/Profile";
*) wireguard - allow same peer's public key for different interfaces;
*) wireguard - fixed IPv6 LL address generation;
*) wireguard - fixed IPv6 traffic processing with multiple peers;
*) wireguard - made "preshared-key" and "private-key" values sensitive;
*) wireless - added "3gpp-info" parameter to interworking configuration;
*) wireless - added EAP-AKA to interworking's realm configuration;
*) wireless - added information about client signal strength to log messages about disconnections;
*) wireless - correctly preserve WMM priority when receiving packets;
*) wireless - fixed frequency range information for IPQ4019 interfaces;
*) wireless - fixed interface initialization on Metal 2SHPn;
*) wireless - improved nv2 link stability;
*) wireless - improved wireless connection stability during background scans;
*) www - fixed "tls-version" for SSL;
*) x86 - added support for Intel E810 NIC;
*) x86 - allow to select disk for install image;
*) x86 - fixed NVME partition path;
*) x86 - fixed VLAN tagged packet transmit;
*) x86 - made "no" the default value for "disable-running-check" ethernet parameter;
*) x86 - properly distinguish multiple NICs that share the same PCI bus number;
*) zerotier - fixed IPv6 support;
*) zerotier - made MAC and MTU values read-only;
*) zerotier - properly handle IP address change;

To upgrade, click "Check for updates" at /system package in your RouterOS configuration interface, or head to our download page: http://www.mikrotik.com/download

If you experience version related issues, then please send supout file from your router to support@mikrotik.com. File must be generated while router is not working as suspected or after some problem has appeared on device

Please keep this forum topic strictly related to this particular RouterOS release.
 
Kindis
Member
Member
Posts: 416
Joined: Tue Nov 01, 2011 6:54 pm
Location: Sweden

Re: v7.2 is released!

Tue Apr 05, 2022 9:49 am

Holly Molly what a changelog. Great work but I need a day just to ingest the changelog :-)
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 9:58 am

Tjeez ... that's a LOONG changelog indeed ...
 
lpoonyx
just joined
Posts: 6
Joined: Tue Dec 03, 2019 3:28 pm

Re: v7.2 is released!

Tue Apr 05, 2022 9:59 am

BGP prefix count :((((
 
JanezFord
Member Candidate
Member Candidate
Posts: 270
Joined: Wed May 23, 2012 10:58 am

Re: v7.2 is released!

Tue Apr 05, 2022 10:08 am

Upgraded rb2011-uias-2hnd from 7.1.5 to 7.2 with no issues. WiFi station pseudobridge, a few vlans, ospf. Working without issues. Winbox 3.32 with Wine on mac causes winbox to crash on login, Winbox 3.35 works fine.

JF.
 
rpingar
Long time Member
Long time Member
Posts: 586
Joined: Fri May 28, 2004 2:46 pm
Location: Italy

Re: v7.2 is released!

Tue Apr 05, 2022 10:13 am

*) x86 - added support for Intel E810 NIC;
Em810 doesn't work correctly, the interfaces are reported running also when nothing is connected into the qsfp28 ports.
ticket 78769

regards
Ros
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:20 am

Looks like hAP lite received a super pursuit mode or something. While the last upgrade from 7.1.3 to 7.1.5 took like 10 minutes, this 7.2 now was installed within some minutes. Reboot seem to take less time too (+/- 50sec). CLI is way more snappy now too.
/export
now finishing within < 1min too. No errors. A lot has improved for smips it seems.
 
User avatar
BartoszP
Forum Guru
Forum Guru
Posts: 2147
Joined: Mon Jun 16, 2014 1:13 pm
Location: Poland

Re: v7.2 is released!

Tue Apr 05, 2022 10:25 am

hEX S remotely upgraded from 7.1.5 to 7.2 ... OSPF+BGP ... seems to work. No need to travel :)
Real admins use real keyboards.
To quote or not to quote, there is the topic: viewtopic.php?f=2&t=168474
 
ErfanDL
Member
Member
Posts: 359
Joined: Thu Sep 29, 2016 9:13 am
Location: IRAN
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 10:31 am

after upgrade hap lite to 7.2 the WiFi couldn't authentication with clients.
@WLAN-HotSpot: disconnected, extensive data loss, signal strength -58
 
Guntis
MikroTik Support
MikroTik Support
Posts: 79
Joined: Fri Jul 20, 2018 1:40 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:39 am

ErfanDL please contact support@mikrotik.com with more details, such as, what version you upgraded from, what kinds of clients, and if all are affected, and attach a supout.rif file from the device, if possible while it's running 7.2, and clients are experiencing this issue.
 
erlinden
Forum Guru
Forum Guru
Posts: 1061
Joined: Wed Jun 12, 2013 1:59 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:49 am

Upgraded:

local
RB4011iGS+RM
2x hEX PoE
PowerBox

remote
hEX S
cAP ac

Smooth and fast upgrade.
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Tue Apr 05, 2022 11:01 am

Audience with wifiwave2 package installed upgraded from 7.2rc5 to 7.2 just fine.

However, after every reboot it (still) shows the following in the log:
09:57:28 system,info router rebooted
...
09:57:33 system,error,critical error while running customized default configuration script: bad command name wireless (line 977 column 25)
09:57:33 system,error,critical

...
09:58:09 system,critical,info ntp change time Apr/05/2022 09:57:43 => Apr/05/2022 09:58:09

The wording indicates that boot script refers to legacy wireless driver which is not there if (optional) wifiwave2 package is installed. And no, I don't have any custom script installed what so ever, this is coming from some default stuff.

BTW, this is not version specific, it happened with all 7.2rc versions I tried so far.
 
fragtion
Member Candidate
Member Candidate
Posts: 184
Joined: Fri Nov 13, 2009 10:08 pm
Location: Johannesburg, South Africa

Re: v7.2 is released!

Tue Apr 05, 2022 11:07 am

The "Rare Config loss" issue is unfortunately still present for sure - I upgraded my home RB5009 from v7.2rc7 to 7.2. After 10 minutes unit was not coming online, so I connected serial cable and saw most interfaces were removed from bridge. Added main access ether port back to bridge and logged in with winbox, to find that more "devastation" had occured, for instance:
ros72configloss.png
Luckily I anticipated this as it's been happening on this device several times before with past versions, so I created an export just before the upgrade.
I will post "before and after" export rsc to a new support ticket, along with an "after" supout..
Edit: Details posted to SUP-78899.

Another interesting bug is that I can't seem to paste (from clipboard) my export into the winbox terminal window (I've noticed this since a few builds ago) - even if I only do a few lines at a time. The lines seem to "self-corrupt" as it's busy pasting in. So there seems to be a bug with pasting to terminal, I'm not sure yet if it only affects mac-based winbox sessions or ipv4 winbox sessions also. (I'm on winbox x64 v3.35)
Basically I need to add an IP address to the router and ssh/telnet from a different terminal in order to paste the exported config cleanly. I prefer to paste to console than use /import, as I can paste line-by-line and see any issues as they occur

Other than that, it seems a lot of good progress here and I'm happy to be on this new version. We should just keep regular backups until this particular issue is definitively resolved
You do not have the required permissions to view the files attached to this post.
Last edited by fragtion on Tue Apr 05, 2022 11:48 am, edited 5 times in total.
 
elbob2002
Member Candidate
Member Candidate
Posts: 153
Joined: Tue May 15, 2018 8:15 pm
Location: Ireland

Re: v7.2 is released!

Tue Apr 05, 2022 11:16 am

Cosmetic/Minor Bug:

Almost every non-CHR Device I upgraded is now showing a warning under System --> Routerboard:

Warning: cpu not running at default frequency

750GR3, RB5009, Chateau 12, CRS-125.

The only device that doesn't show this error is an RB3011.
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Tue Apr 05, 2022 11:18 am

Almost every non-CHR Device I upgraded is now showing a warning under System --> Routerboard:

Warning: cpu not running at default frequency

It's not entirely cosmetic ... many (if not all) devices on your list now support CPU clock auto scaling, so new default setting is "auto".
 
User avatar
rushlife
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Nov 05, 2015 12:30 pm
Location: czech republic

Re: v7.2 is released!

Tue Apr 05, 2022 11:19 am

omg, so much of your work

thx mikrotik, awesome job 👍
 
ErfanDL
Member
Member
Posts: 359
Joined: Thu Sep 29, 2016 9:13 am
Location: IRAN
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 11:27 am

ErfanDL please contact support@mikrotik.com with more details, such as, what version you upgraded from, what kinds of clients, and if all are affected, and attach a supout.rif file from the device, if possible while it's running 7.2, and clients are experiencing this issue.
After three times reboots, the problem was solved
 
th0massin0
Member Candidate
Member Candidate
Posts: 152
Joined: Sun May 11, 2014 4:16 am
Location: Poland

Re: v7.2 is released!

Tue Apr 05, 2022 11:31 am

SSTP on CHR, still unusable! SUP-67642
It was reported at 2021-12-02; I am deeply disappointed that one of the most wanted feauture is still ignored by Mikrotik.
Last edited by th0massin0 on Tue Apr 05, 2022 11:58 am, edited 1 time in total.
 
buset1974
Frequent Visitor
Frequent Visitor
Posts: 79
Joined: Wed Sep 13, 2006 12:12 pm
Location: Jakarta

Re: v7.2 is released!

Tue Apr 05, 2022 11:54 am

in MPLS L3 case, (PE v7.2 and CPE v6.49.3)

BGP vpnv4 Peering between PE and CPE are not working, BGP session were established but PE did not receive any prefix sent by CPE and CPE did not receive any prefix sent by PE.

Please make it BGP stable and completed soon !!
Last edited by buset1974 on Tue Apr 05, 2022 12:11 pm, edited 1 time in total.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:11 pm

Again an issue with the routing tables... sigh.
After update, under /routing/tables the user added routing table ampr appears twice.
Well, maybe better than routing tables disappearing, but still not OK!
I removed the second entry and it appears everything is normal (no *0x1234 references anywhere)
 
freemannnn
Long time Member
Long time Member
Posts: 697
Joined: Sun Oct 13, 2013 7:29 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:18 pm

still cannot print multiple vouchers in user manager.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:19 pm

Another interesting bug is that I can't seem to paste (from clipboard) my export into the winbox terminal window (I've noticed this since a few builds ago) - even if I only do a few lines at a time. The lines seem to "self-corrupt" as it's busy pasting in. So there seems to be a bug with pasting to terminal, I'm not sure yet if it only affects mac-based winbox sessions or ipv4 winbox sessions also. (I'm on winbox x64 v3.35)
"that is not a bug, it is a feature!"
A very useless and irritating feature. It has been present from long ago.
This they call "Hotlock mode". In that mode, every command and parameter is expanded to full length once it is uniquely matched, but then when you continue to type it adds the new input after that. I could think it was sort of useful when it did not do that.

In RouterOS v6 it was even worse: Hotlock mode was enabled using Ctrl-V. People often wanted to paste stuff into the terminal and typed Ctrl-V. "nothing happened". Then they pasted using right-button and got into this terrible mess.
But in RouterOS v7 the Hotlock key has been changed to F7. So less likely to make this mistake.

Still I think it should simply be removed. You can always auto-expand things using TAB.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:21 pm

Tjeez ... that's a LOONG changelog indeed ...
Yeah, because it is relative to 7.1. They should have made a changelog relative to 7.2rc7 as well.
 
UpRunTech
Member Candidate
Member Candidate
Posts: 161
Joined: Fri Jul 27, 2012 12:11 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:27 pm

Watch out, upgrade and reboot seemed OK, did the reboot to update the firmware and now it's bricked. RB4011 with Wifi. Family is about to riot.

<edit> I have reset it and not netinstalled. ROS was then at 7.2 and firmware at 6.44.4 and all is OK. Updating the firmware to 7.2 makes the same brick behaviour. I am going to use 7.1.5 firmware and 7.2 ROS for now.
Last edited by UpRunTech on Tue Apr 05, 2022 12:45 pm, edited 1 time in total.
 
huntermic
Member Candidate
Member Candidate
Posts: 109
Joined: Wed Oct 26, 2016 3:42 pm

Re: v7.2 is released!

Tue Apr 05, 2022 12:31 pm

Tjeez ... that's a LOONG changelog indeed ...
Yeah, because it is relative to 7.1. They should have made a changelog relative to 7.2rc7 as well.
That's something i'm missing everytime we go out of test/beta/rc to a stable version!
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 2870
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v7.2 is released!

Tue Apr 05, 2022 12:35 pm

They should have made a changelog relative to 7.2rc7 as well.
That is some I do miss as well. If you look at Cisco, you have a tool where you can compare each version against each other and even select different hardware.

Cisco Feature Navigator
https://cfnng.cisco.com/
Not sure how much you can see there without a Cisco account.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:06 pm

That is some I do miss as well. If you look at Cisco, you have a tool where you can compare each version against each other and even select different hardware.

Cisco Feature Navigator
https://cfnng.cisco.com/
Not sure how much you can see there without a Cisco account.
I suggested that here before as well. Make a database with all changes (at which version they occur, probably at which version they become irrelevant) and then make a website where you can enter two version numbers and see the changes between them.
Should be relatively easy to make, and can be used by the online updater as well (to show the relevant changes between the version you currently have and the one you download).
 
User avatar
npeca75
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Thu Aug 03, 2017 3:12 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:11 pm

Please MT

make this ugly red line at least blue, informative
or take it away when PPTP is disabled

it is irritating, annoying,
and at first look, when you open winbox, you start to panic what went wrong now??
some of my interfaces are red, ooo dear god
then, you realize, nah, it is only pptp :(
so please, remove or repaint this red sh*t
You do not have the required permissions to view the files attached to this post.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 1:13 pm


make this ugly red line at least blue, informative
or take it away when PPTP is disabled
I disagree.
That's the right color for that sort of message.
 
hecatae
Member Candidate
Member Candidate
Posts: 134
Joined: Thu May 21, 2020 2:34 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:20 pm

hAP Lite updated, snappier than testing release.
 
User avatar
npeca75
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Thu Aug 03, 2017 3:12 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:21 pm

I disagree.
That's the right color for that sort of message.
well, mister @holvoetn

i understood this approach when you, for example build a new network
but, no
it is not my choice to use pptp
and if you think, that someone could call the multi/hyper/giga/mega company and tell them: you know, my MT router is red , please change vpn type ...
hahaha
no, it is not our choice what will we use
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 1:23 pm

I fully understand it may not be your choice but it remains the appropriate color for that message.
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:23 pm

So.. what's the changelog vs the last rc?
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:25 pm

I disagree.
That's the right color for that sort of message.
well, mister @holvoetn

i understood this approach when you, for example build a new network
but, no
it is not my choice to use pptp
and if you think, that someone could call the multi/hyper/giga/mega company and tell them: you know, my MT router is red , please change vpn type ...
hahaha
no, it is not our choice what will we use
Indeed, it's network/sys admins choice, if you're not that person, suck it up.
 
User avatar
macgaiver
Forum Guru
Forum Guru
Posts: 1751
Joined: Wed May 18, 2005 5:57 pm
Location: Sol III, Sol system, Sector 001, Alpha Quadrant

Re: v7.2 is released!

Tue Apr 05, 2022 1:30 pm

The "Rare Config loss" issue is unfortunately still present for sure...
If it is filesystems issue and it might be one, upgrade will not solve it, you will need to netinstall it with newest netinstall, to get newest filesystem up and running.
With great knowledge comes great responsibility, because of ability to recognize id... incompetent people much faster.
 
User avatar
npeca75
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Thu Aug 03, 2017 3:12 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:35 pm

I fully understand it may not be your choice but it remains the appropriate color for that message.
oh, no
it is not

red color - > log, error

do we have error on PPTP interface ?
no

blue color -> log, warning
informative, please use other vpn

so, no, no, and no
if we start using random colors for random things ...

next time, when you missconfigure DHCP client, put it on bridge leg, and color change to red
then you will say, ooo, noo, it is not an error :) i saw red paint already on other place, so no, it is not big deal

again, no
red -> error
blue -> warning
Last edited by npeca75 on Tue Apr 05, 2022 1:42 pm, edited 1 time in total.
 
User avatar
denisun
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Wed Jul 16, 2014 6:38 pm
Location: Greece

Re: v7.2 is released!

Tue Apr 05, 2022 1:36 pm

1. In RB2011 at export rsc
i have in all rules in ipv6 firewall mangle:
dst-prefix=::/0
src-prefix=::/0
I have not the above statements in 6.x and i cant show in winbox in rules properties
not even when I select the corresponding columns from the winvox ipv6/mangle window.

2. I cant have ipv6 advertise in ovpn connection with udp enable.
The ovpn connection takes place without a problem but i get only ipv4 address.
All the configuration with ovpn (except udp enable) and ipv6 is the same with 6.x in which i get ipv6 address in ovpn connections.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 1:39 pm

Upgraded at home:
Hex
hAP AC3
hAP AC2
hAP
map Lite
CHR

No problems so far upgrading nor afterwards. From the limited time it was active on Hex (updated around 09h00) it "looks" like that memory leak is still present.
Usage is slightly going up every hour without any clear indication what causes it.
 
User avatar
own3r1138
Member
Member
Posts: 432
Joined: Sun Feb 14, 2021 12:33 am
Location: Pleiades
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 1:44 pm

Thanks, long changelog.
 
LonDat
just joined
Posts: 1
Joined: Tue Sep 24, 2019 6:25 pm

Re: v7.2 is released!

Tue Apr 05, 2022 1:47 pm

Wow, this is great. Now it seems I'll migrate my infra to 7.2 from 6.xx.
MT, great work 👍
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8680
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 1:56 pm

*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
Don't we need something like "discard-v6-configuration-completely-please-I-am-from-v7" to remove any "historical" data from a router? :)
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
User avatar
denisun
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Wed Jul 16, 2014 6:38 pm
Location: Greece

Re: v7.2 is released!

Tue Apr 05, 2022 2:02 pm

Also not working graphs under https
Error 404: Not Found
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:04 pm

The "Rare Config loss" issue is unfortunately still present for sure...
If it is filesystems issue and it might be one, upgrade will not solve it, you will need to netinstall it with newest netinstall, to get newest filesystem up and running.
If it is a filesystem issue then there is a bug in v7 that should urgently be fixed. This problem is so commonly reported that it apparently occurs under normal operating conditions, and that should not happen.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 2870
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v7.2 is released!

Tue Apr 05, 2022 2:05 pm

Changes since last rc (rc7) Find using compare duplicate cells in Excel.

No new stuff added since rc7


List of all changes and when they was introduced in 7.2 train
RC `7.2.0
rc5 *) api - accept "Content-Type" with specified charset;
rc5 *) arm - fixed "auto" CPU frequency setting;
rc2 *) arm - fixed "shutdown" command on hAP ac^2;
rc5 *) arm64 - improved Watchdog initiated reboot reason reporting;
rc1 *) arm64 - improved low disk space handling condition on upgrade;
rc1 *) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
rc1 *) backup - fixed automatic backup generation when resetting configuration;
rc5 *) backup - fixed cloud backup's creation timezone;
rc5 *) bgp - added BGP advertisements display (requires output.keep-sent-attributes to be set);
rc1 *) bgp - do not export default BGP values;
rc4 *) bgp - fixed VPNv4 route sending to remote peer;
rc5 *) bgp - fixed link-local iBGP address selection;
rc5 *) bgp - fixed network advertisement from address-lists after reboot;
rc2 *) bgp - fixed routing table and BGP configuration order in export;
rc1 *) bgp - improvements on detecting peers local address when IPv6 link-local addresses are used;
rc1 *) bluetooth - allow to export device, advertiser and scanner configuration;
rc2 *) bluetooth - disable scanning by default;
rc2 *) bridge - added fast-path and inter-VLAN routing FastTrack support when vlan-filtering is enabled;
rc4 *) bridge - fixed FastPath when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
rc4 *) bridge - fixed PPPoE packet forwarding when using "use-ip-firewall-for-pppoe" setting;
rc2 *) bridge - fixed bridge filter and NAT rules on ARM64 and TILE devices;
rc4 *) bridge - fixed destination NAT when using "use-ip-firewall" setting;
rc3 *) bridge - fixed filter and NAT "set-priority" action;
rc4 *) bridge - fixed filter and NAT "set-priority" on ARM64 devices;
rc4 *) bridge - fixed filter rules when using interface lists;
rc5 *) bridge - fixed firewall "ingress-priority" matcher and "new-priority=from-ingress" action settings from VLAN tagged frames;
rc4 *) bridge - fixed priority tagged frame forwarding when using "frame-types=admit-only-untagged-and-priority-tagged" setting;
rc2 *) capsman - improved stability when running background scan on CAP;
rc1 *) capsman - improved system stability when processing CAP packet by Mangle;
rc6 *) ccr2004 - improved PCI timeout handling on CCR2004-1G-2XS-PCIe;
rc5 *) ccr2004 - improved system stability on CCR2004-12S+2XS;
rc1 *) certificate - allow to choose digest algorithm for CSR signing;
rc1 *) certificate - made "fingerprint" parameter read-only;
rc1 *) chr - improved system stability when writing into memory;
rc1 *) chr - temporarily suspended downgrade to RouterOS v6;
rc2 *) clock - properly notify all instances about time changes;
rc2 *) conntrack - properly detect helper status;
rc1 *) console - fixed "print" command with additional "where" condition;
rc2 *) console - improved console responsiveness when processing received characters;
rc1 *) console - made "password" parameter mandatory when creating a new user;
rc1 *) console - properly erase CLI history after configuration reset;
rc2 *) console - updated copyright notice;
rc5 *) crs1xx/2xx - fixed static switch host addresses after link down;
rc5 *) crs1xx/2xx - ignore static bridge host addresses (switch unicast-fdb should be used instead);
rc1 *) crs3xx - fixed CPU load balancing for ARM dual core devices;
rc2 *) crs3xx - fixed QSFP+ interface LEDs;
rc4 *) crs3xx - fixed watchdog timer functionality;
rc2 *) crs3xx - improved SFP+ interface linking after reboot for CRS312 device;
rc4 *) crs3xx - improved maximum allowed ACL rule calculation;
rc4 *) crs3xx - improved system stability when creating many ACL rules on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
rc2 *) defconf - made "192.168.188.1/24" the default LAN IP address for LTE CPE devices;
rc1 *) dhcp-server - fixed DHCP Option decimal value parsing;
rc1 *) dhcp-server - fixed statistics sending in "Accounting Stop" packets;
rc1 *) dhcp-server - send "Class" attribute in "Accounting Request" when provided by RADIUS;
rc1 *) dhcpv4-server - allow adding comments;
rc2 *) dhcpv4-server - remove dynamic leases when server configuration is removed;
rc1 *) dhcpv4-server - reset dynamic "bcast" flag when receiving offer from DHCP relay;
rc1 *) dhcpv4-server - reset offer counter when receiving offer from DHCP relay;
rc5 *) dhcpv6 - added VRF support;
rc2 *) dot1x - added "server-fail-vlan-id", "guest-vlan-id" and "reauth-timeout" settings for dot1x server;
rc2 *) dot1x - added "src-address", "src-mac-address" and "src-port" settings for dynamic switch rules;
rc2 *) dot1x - added NAS-Port-ID attribute for RADIUS Access-Request;
rc5 *) dude - fixed The Dude client compatibility with RouterOS v7;
rc6 *) dude - fixed The Dude compatibility with ARM64;
rc1 *) ethernet - improved system stability when receiving large packets on devices with 88F3720 CPU (nRAY, LHGG);
rc5 *) firewall - improved available port lookup for source NAT when free port range is exhausted;
rc1 *) graphing - properly generate interface graph for traffic higher than 2.1Gbps;
rc1 *) hotspot - fixed login page over HTTPS;
rc2 *) hotspot - fixed memory leak on every web page loading;
rc2 *) hotspot - fixed web page loading using HTTPS;
rc2 *) ike2 - ignore "INITIAL-CONTACT" payload on responder when "send-initial-contact" is disabled;
rc2 *) interface - fixed minor memory leak when interface or connected route is changed;
rc1 *) ipsec - added hardware acceleration support for CCR2116;
rc5 *) ipsec - fixed "identities" menu emptying after RouterOS upgrade/reboot;
rc5 *) ipv6 - do not add duplicate dynamic prefix when static already exists;
rc5 *) ipv6 - fixed "retransmissit-interval" unit value;
rc5 *) ipv6 - fixed VLAN tagged PPPoE packet receiving on RB5009;
rc5 *) l2tp - fixed CHAP challenge packet processing over IPsec;
rc6 *) l2tp - improved service stability when disabling L2TP server with connected clients;
rc4 *) l2tp - improved system stability when processing L2TP control messages;
rc2 *) l3hw - added HW offloaded FastTrack support for inter-VLAN routing;
rc2 *) l3hw - fixed HW offloaded NAT;
rc1 *) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
rc1 *) l3hw - fixed ICMP message when routed packet exceeds MTU and DF flag is set;
rc1 *) l3hw - fixed bonding source MAC address;
rc6 *) l3hw - fixed default route offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
rc5 *) l3hw - improved routing table offloading for CRS305, CRS326-24G-2S+, CRS328, netPower, netFiber devices;
rc1 *) l3hw - improved system stability when using 7 or more VLAN interfaces;
rc5 *) led - fixed LED behavior on Audience;
rc5 *) led - reduced LTE signal LED range to -70;
rc2 *) leds - fixed user LED on RB750Gr3;
rc5 *) log - added warning message when connection tracking table is full;
rc2 *) log - include message also in e-mail body;
rc1-rc2 *) lora - fixed "antenna-gain" parameter unit;
rc5 *) lte - add IPv6 address on interface as well;
rc2 *) lte - added 3 APN profile support and APN name re-using on R11e-LTE6;
rc2-rc4 *) lte - added MAC address and IPv6 LL address persistence after reboot on EG12 and EG18 modems;
rc1 *) lte - added basic information support for Telit LM960 and LM940 in MBIM mode;
rc2 *) lte - added class based support for configless RNDIS LTE modems;
rc5 *) lte - added support for Uplink CA reporting;
rc5 *) lte - changed "CS/PS" registration type from "both" to "any" on R11e-LTE un R11e-LTE6;
rc5 *) lte - do not loose "band" configuration after reboot on Chateau 5G;
rc2 *) lte - do not show external antenna selector on devices that does not support it;
rc6 *) lte - enabled multi-APN and name re-use support for Chateau;
rc1 *) lte - expose diagnostics channel for all modems;
rc1 *) lte - fixed "monitor" command to not report old info;
rc5 *) lte - fixed AT command response handling on R11e-LTE;
rc2 *) lte - fixed IPv6 address addition after startup on R11e-LTE6;
rc5 *) lte - fixed MBIM modem reset on AT timeout;
rc5 *) lte - fixed link flapping when loosing cellular signal on R11e-LTE un R11e-LTE6;
rc1 *) lte - fixed packet forwarding on R11e-4G and R11e-LTE-US;
rc2 *) lte - fixed possible timeouts when sending SMS in LTE only mode on R11e-LTE;
rc2 *) lte - fixed support for Sierra MC7710;
rc2 *) lte - fixed support for Telit 960;
rc2 *) lte - improved stability on "+EGMR" response in MBIM mode;
rc6 *) lte - improved stability when modem disappears during firmware upgrade;
rc2 *) lte - improved support for sending/receiving SMS in LTE only mode on R11e-LTE6;
rc4 *) lte - made "no" the default value for "use-network-apn" parameter;
rc2 *) lte - properly recognize MBIM modem in USB port as LTE on Chateau 5G;
rc4 *) ntp - allow adding duplicate server address if dynamic entry exists;
rc4 *) ntp - fixed multicast mode support;
rc4 *) ntp - improved IPv6 address support;
rc5 *) ntp - improved service stability when none of the NTP servers are reachable for a while;
rc6 *) ntp - improved source address usage for reply packets;
rc1 *) ntp - print log change time with time-zone applied;
rc2 *) ospf - added "ptmp-broadcast" interface type (compatible with RouterOSv6 PTMP type);
rc2 *) ospf - convert ospf "static" redistribute to "static,dhcp,modem,vpn" after update from RouterOS v6;
rc2 *) ospf - fixed MD5 authentication;
rc2 *) ospf - fixed NBMA hello's not being sent if priority is set to 0;
rc4 *) ospf - fixed default route origination when "default-originate=if-installed" "redistribute" is enabled;
rc2 *) ospf - fixed default type-3 LSA's not being injected to stub area;
rc1 *) ospf - fixed distance if "originate-default" is set to "always";
rc4 *) ospf - fixed external LSA not updating after prefix netmask change;
rc2 *) ospf - fixed incorrect LSA types when changing area types;
rc2 *) ospf - fixed neighbor election failure;
rc1 *) ospf - fixed neighbor stuck in ExStart;
rc1 *) ospf - fixed simple authentication;
rc5 *) ospf - general stability improvements;
rc5 *) ospf - improved DB retransmit logging;
rc1-rc2 *) ospf - improved logging;
rc1 *) ospf - improved overall stability;
rc1 *) ospf - improved stability for very large LSDB;
rc2 *) ospf - improved stability on OSPFv3 instance disabling;
rc1 *) ospf - improved stability when DR goes down;
rc1 *) ospf - improves stability when handling looped back OSPF packets;
rc6 *) ospf - properly set VRF for gateway;
rc5 *) ospf - send notifies for neighbors;
rc1 *) ovpn - added SHA2 authentication algorithm support;
rc1 *) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
rc1 *) ovpn - added option to send disconnect message in UDP mode;
rc1 *) ovpn - fixed large option message parsing;
rc2 *) ovpn - improved UDP session handling;
rc5 *) ovpn - improved memory allocation on Tile in "ethernet" mode;
rc5 *) ovpn - improved system stability in high load scenarios;
rc5 *) pimsm - fixed menu prints;
rc5 *) pimsm - general stability improvements;
rc6 *) poe - fixed PoE driver loading on CRS354-48P-4S+2Q+;
rc1 *) poe - update PoE firmware only on devices that support it;
rc4 *) ppp - added "comment" option for PPPoE servers;
rc2 *) ppp - fixed AT+CPIN chat when SIM PIN is specified;
rc4 *) ppp - improved stability when handling large amount of connections simultaneously;
rc1 *) ppp - show local and remote IPv6 addresses (CLI only);
rc1 *) pppoe - added option to configure "host-uniq" parameter;
rc1 *) pppoe - added option to ignore PADI messages with empty service name;
rc1 *) pppoe - use default MTU of 1492;
rc1 *) pptp - added insecure connection warning;
rc2 *) pptp - show insecure connection warning on dynamic interfaces;
rc2 *) qsfp - correctly display auto-negotiation status;
rc5 *) queue - fixed queued IPv6 traffic considered as "invalid" by Firewall;
rc1-rc2 *) queue - improved system stability when processing traffic;
rc4 *) queue - improved system stability when using more than 255 unique packet marks;
rc5 *) rb4011 - fixed jumbo frame processing on SFP+ port when using 1G module;
rc5 *) rip - added logging;
rc5 *) rip - fixed route metrics;
rc5 *) rip - fixed route redistribution;
rc5 *) rip - use nexthop with interface;
rc6-rc7 *) route - allow OSPF and RIP redistributed routes to be matched by routing filters;
rc1 *) route - fixed "min-prefix" configuration when set to 0;
rc2 *) route - fixed "suppress-hw-offload" update;
rc5-rc6 *) route - fixed "table" menu emptying after RouterOS upgrade;
rc5 *) route - fixed BGP atomic aggregate value;
rc4 *) route - fixed ECMP load balancing in FastPath;
rc5 *) route - fixed ECMP route removal;
rc4 *) route - fixed route addition to VRF from BGP;
rc2 *) route - fixed router's LSA for PTP networks;
rc2 *) route - fixed routing configuration export on SMIPS devices;
rc5 *) route - general stability improvements;
rc2 *) route - improved routing table print speed;
rc2 *) route - show OSPF and RIP specific attributes in "/routing route" table;
rc2 *) route-filter - fixed "return" action;
rc2 *) route-filter - fixed complex matchers with "|| or and &&";
rc2 *) route-filter - fixed incorrect invert-match configuration upgrade from RouterOS v6;
rc2 *) route-filter - fixed range conversion after update from RouterOS v6;
rc1 *) route-filters - allow to filter and modify default route if "originate-default" is set to "always";
rc1 *) route-filters - fixed possible address list race condition and memory leak;
rc4 *) route-filters - renamed "*-set" to "*-list";
rc5 *) routerboard - fixed "ether2" interface presence on some RBwAPGR devices;
rc5 *) routerboard - fixed WPS button functionality on Audience;
rc5 *) routing - added PCAP viewer tool for BGP advertisements debugging purposes;
rc5 *) routing-filter - fixed "bgp-*-communities-empty" matcher;
rc2 *) rpki - made RPKI verify non-strict, introduces new state "unverified";
rc2 *) rpki - show expire timer;
rc5 *) sfp - improved SFP module detection on CRS106 and CRS112;
rc2 *) smb - fixed SMB2.0 disk size reporting;
rc5 *) smips - improved RAM allocation;
rc4 *) sms - increased "at-chat" timeout when sending SMS;
rc2 *) snmp - added SFP vendor name to optical table;
rc2 *) snmp - added support for "ipv6AddrPrefixTable" and "ipv6RouteNumber" OID's;
rc2 *) snmp - allow two level nesting for vlan, bonding speed query;
rc1 *) socks - fixed SOCKS5 support;
rc1 *) ssh - fixed forwarding with IPv6 link-local addresses;
rc1 *) ssl - fixed CA certificate processing when "subjAltName" is marked as critical;
rc1 *) supout - added "port-controller" bridge section;
rc5 *) switch - added "rx-overflow" counter for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
rc4 *) switch - fixed port-isolation misconfiguration detection when using multiple switches;
rc5 *) switch - improved packet forwarding with enabled "cpu-flow-control" setting between different rate interfaces for 88E6393X (RB5009) and 88E6191X (CCR2004-16G-2S+) switch chips;
rc4 *) switch - improved switch chip initialization process on bootup for CCR2004-16g-2s+ devices;
rc6 *) switch - properly limit maximum number of switch rules to 256 on RB5009;
rc2 *) system - fixed license loss on some RB1100Dx4 and RB4011 devices;
rc1 *) tr069-client - accept 200-299 codes for HTTP diagnostics;
rc5 *) tr069-client - added support for 5G band configuration;
rc5 *) tr069-client - added support for wireless "skip-DFS" configuration;
rc1 *) tr069-client - added support for wireless client uptime reporting;
rc6 *) tr069-client - fixed RPC download of "3 Vendor Configuration File" with branding package;
rc2 *) traffic-flow - do not handle NAT events when "nat-events" is disabled;
rc2 *) traffic-generator - fixed transmit speed for multiple asymmetric streams;
rc1 *) upgrade - improved 404 error handling when checking for new versions;
rc1 *) upgrade - improved downgrade prompt message;
rc4 *) ups - fixed UPS support;
rc2 *) usb - fixed display of incorrect port count for USB serial ports;
rc1 *) user - removed obsolete "tikapp" policy;
rc1 *) user - send "Class" attribute in "Accounting Request" when provided by RADIUS;
rc2 *) vlan - fixed improper VLAN priority addition for routed packets;
rc2 *) vxlan - allow unsetting "group" and "interface" properties;
rc4 *) vxlan - fixed running state after reboot when using "interface" and "group" settings;
rc2 *) webfig - do not show side menu if WebFig is disabled by skin;
rc1 *) webfig - fixed default configuration popup presence;
rc1 *) webfig - fixed user policy lookup for skin designer;
rc4 *) wifiwave2 - added "client-isolation" feature;
rc1 *) wifiwave2 - added support for handling disconnect request messages from RADIUS servers;
rc1 *) wifiwave2 - fixed calling "scan" and "frequency-scan" commands through the API;
rc2 *) winbox - added "Disconnect Notify" checkbox to "Interface/OVPN Client" menu;
rc2 *) winbox - added "Freq. Usage" and "Scan" buttons for WifiWave2 interfaces;
rc2 *) winbox - added "Ignore Missing" selector to "System/Packages" menu;
rc1 *) winbox - added "Mode" parameter under "Wireless" menu with WifiWave2 package;
rc2 *) winbox - added "Routing Table" parameter for IPv6 routes;
rc1 *) winbox - added "TLS Version" parameter for "Interface/OVPN";
rc2 *) winbox - added "VPN" tab to "Routing/BGP" menu;
rc1 *) winbox - added "VRF" parameter for "SSH" and "Telnet" menus;
rc2 *) winbox - added "VRF" parameter to "IP/Services" menu;
rc2 *) winbox - added "comment" parameter to "User Manager/Users" menu;
rc4 *) winbox - added "host-uniq" parameter to PPPoE client interface;
rc2 *) winbox - added MLAG support;
rc2 *) winbox - added SHA256 and SHA512 "Auth" values for OVPN menu's;
rc2 *) winbox - added ZeroTier support;
rc2 *) winbox - added explicit "Upload" and "Download" names for "Bucket Size" parameters under "Queues" menu;
rc1 *) winbox - added interface list support for "IP/Traffic Flow" menu;
rc1 *) winbox - added local/remote CPU load parameters for "Bandwidth Test";
rc5 *) winbox - added missing "3GGP RAW" parameter under "Interface/Wireless/Interworking Profile" menu;
rc5 *) winbox - added missing "accounting", "interim-update" and "radius-password" parameters under "IP/DHCP Server" menu;
rc1 *) winbox - added support for "Tool/Speedtest" menu;
rc1 *) winbox - added support for W60G align tool;
rc5 *) winbox - allow adding more than 100 tagged/untagged interfaces under "Bridge/VLAN" menu;
rc5 *) winbox - allow configuring "VTEP" under "Interface/VXLAN" menu;
rc2 *) winbox - allow setting "Interface" parameter for 100G LED types;
rc1 *) winbox - changed "Accept Redirects" parameter type under "IPv6/Settings" menu;
rc1 *) winbox - do not require "name" and "file name" parameters for certificate import/export;
rc2-rc4 *) winbox - do not show "Antenna Scan" button on devices that do not support it;
rc1 *) winbox - do not show connection tracking table if it has more than 10000 entries;
rc5 *) winbox - fixed "00:00:00" time printing;
rc1 *) winbox - fixed "Switch" menu on Chateau devices;
rc2 *) winbox - fixed "action" field in "IP/Web Proxy/Access" menu;
rc1 *) winbox - fixed "expires-after" certificate parameter value;
rc2 *) winbox - fixed CHR License renewing process;
rc1 *) winbox - fixed address list type parameters in "Routing" menu;
rc2 *) winbox - fixed content filtering in "Tools/Packet Sniffer/Packets" menu;
rc2 *) winbox - fixed entry order in "Tools/Packet Sniffer/Packets" menu;
rc1 *) winbox - fixed error message when adding NTH rule with "0" value;
rc1 *) winbox - fixed minor typo under "LTE" interface menu;
rc5 *) winbox - fixed switch related settings for MT7621 switch chip (hEX, hEX S, RBM33G, RBM11G, LtAP);
rc1 *) winbox - made "9" the default value for "Target" parameter under "IP/Traffic Flow" menu;
rc1 *) winbox - made "Routing Filters/Rules" table sortable;
rc2 *) winbox - made OSPF interface type names consistent between CLI and GUI;
rc1 *) winbox - moved "IP/Route/Nexthops" and "IPv6/Route/Nexthops" menus to "Routing/Nexthops";
rc5 *) winbox - moved IPv4 and IPv6 "Rules" menus under "Routing" menu;
rc1 *) winbox - properly limit "Disconnect Timeout" value under "CAPsMAN/Configuration" menu;
rc2 *) winbox - properly save "IPv6/Settings" menu in session file;
rc5 *) winbox - properly show "v" flag instead of "y" under "IP/Route" menu;
rc1 *) winbox - properly update ethernet auto negotiation status on CHR;
rc5 *) winbox - properly update server list under "System/NTP Client/Servers" menu;
rc1 *) winbox - renamed "Keep user configuration" to "Keep users" under "System/Reset Configuration" menu;
rc2 *) winbox - renamed "MBPS" to "Mbps" value unit name in "Tools/Traffic Generator" menu;
rc1 *) winbox - renamed "Revoked" parameter to "Revoked Time" under "System/Certificates" menu;
rc1 *) winbox - report local terminal session as "local" instead of "telnet";
rc1 *) winbox - require existing pool for "Address Pool" parameter under "IPv6/DHCP Server" menu;
rc1 *) winbox - require non empty "Packet Mark" value under "Queues" menu;
rc2 *) winbox - show "H" flag for offloaded connections in "IP/Firewall/Connections" menu;
rc1 *) winbox - show "Lost Ratio" column by default under "Tools/Traffic Generator" menu;
rc1 *) winbox - show "Routes" column by default under "PPP/Secrets" menu;
rc5 *) winbox - show "System/Health/Settings" only on boards that have configurable values;
rc2 *) winbox - show "System/SwOS" menu only on boards that have dual boot;
rc1 *) winbox - show additional columns by default for "Wireless" menu with WifiWave2 package;
rc2 *) winbox - sort "Address List" parameter values alphabetically in "IP/DHCP Server/Leases" menu;
rc1 *) winbox - updated default "Routing/BGP/Peer Cache" table appearance;
rc1 *) winbox - use "total" as default value for "Tools/Profile";
rc4 *) wireguard - allow same peer's public key for different interfaces;
rc1 *) wireguard - fixed IPv6 LL address generation;
rc4 *) wireguard - fixed IPv6 traffic processing with multiple peers;
rc1 *) wireguard - made "preshared-key" and "private-key" values sensitive;
rc4 *) wireless - added "3gpp-info" parameter to interworking configuration;
rc4 *) wireless - added EAP-AKA to interworking's realm configuration;
rc1 *) wireless - added information about client signal strength to log messages about disconnections;
rc4 *) wireless - correctly preserve WMM priority when receiving packets;
rc1 *) wireless - fixed frequency range information for IPQ4019 interfaces;
rc2 *) wireless - fixed interface initialization on Metal 2SHPn;
rc4 *) wireless - improved nv2 link stability;
rc2 *) wireless - improved wireless connection stability during background scans;
rc5 *) www - fixed "tls-version" for SSL;
rc2 *) x86 - added support for Intel E810 NIC;
rc5 *) x86 - allow to select disk for install image;
rc5 *) x86 - fixed NVME partition path;
rc6 *) x86 - fixed VLAN tagged packet transmit;
rc2 *) x86 - made "no" the default value for "disable-running-check" ethernet parameter;
rc2 *) x86 - properly distinguish multiple NICs that share the same PCI bus number;
rc5 *) zerotier - fixed IPv6 support;
rc2 *) zerotier - made MAC and MTU values read-only;
rc1 *) zerotier - properly handle IP address change;
Last edited by Jotne on Tue Apr 05, 2022 2:58 pm, edited 1 time in total.
 
huntermic
Member Candidate
Member Candidate
Posts: 109
Joined: Wed Oct 26, 2016 3:42 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:17 pm

Changes since last rc (rc7) Find using compare duplicate cells in Excel.
Nice work
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:18 pm

again, no
red -> error
blue -> warning
Winbox uses the red colored font for any messages. e.g. for informing you that a new LTE-firmware is available. I guess you would agree, that a firmware-update is not an error. And many more places, where they use that color.

But regardless, why do you insist for a blue colored message? Red is not reserved for "error" only. It can be a alert or warning as well. Sure, usually you use red=error, orange=warning and for anything completely informational maybe a completely "un-annoying" color like blue. But would you freak out for a orange warning message as well? I would assume so.

regarding changelog:

as always, there were changes backported to 7.1.x already. So not everything stated in the changelog is completely new. Some changes were already included in 7.1.5.
 
DenisPDA
newbie
Posts: 37
Joined: Tue Sep 04, 2018 5:42 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:22 pm

Hi
What do you think about it ?
Missing RouterOS configuration after a reboot on very rare occasions
viewtopic.php?t=184711#p923967
 
multiduplikator
just joined
Posts: 12
Joined: Tue Jan 04, 2022 10:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:25 pm

In CAPSMAN, we have duplication of
- Provisioning
- Configurations
- Channels
- Datapaths
- Security Cfg.

Deleting the added ones (other but first entry for each "block" cleans this up - no malfunctions, just confusion.
 
User avatar
loloski
Member Candidate
Member Candidate
Posts: 127
Joined: Mon Mar 15, 2021 9:10 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:25 pm

dot1x still broken on 7.2
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 2:29 pm

*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
Don't we need something like "discard-v6-configuration-completely-please-I-am-from-v7" to remove any "historical" data from a router? :)
RouterOS already has such a feature, it is called /system reset-configuration. "force config upgrade" feature was added, to trigger v6 config reimport whenever RouterOS add parts of config upgrade that were not implemented in previous v7 versions.
 
User avatar
Chupaka
Forum Guru
Forum Guru
Posts: 8680
Joined: Mon Jun 19, 2006 11:15 pm
Location: Minsk, Belarus
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 2:35 pm

RouterOS already has such a feature, it is called /system reset-configuration.
How to safely use it on remote devices available only over L3 networks?
Russian-speaking forum: https://forum.mikrotik.by/. Welcome!

For every complex problem, there is a solution that is simple, neat, and wrong.

MikroTik. Your life. Your routing.
 
dave3
just joined
Posts: 23
Joined: Mon Feb 07, 2022 8:06 am

Re: v7.2 is released!

Tue Apr 05, 2022 2:46 pm

The upgrade went ok on an rb750gr3 from 7.1.5 to 7.2. It still downloaded very, very slowly, but without constant timeouts this time.

Comparing an export from before and after the upgrade, everything remained the same, except this was added in 7.2:
/interface ovpn-server server
set auth=sha1,md5
I don't use the openvpn server. I don't think it's a problem, though.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Tue Apr 05, 2022 2:49 pm

Updated successfull from 7.2RC7 or 7.1.5 to 7.2 (ROS and FW) on following devices:
- RB5009UG+S+
- CRS326-24S+2Q+
- 2x CRS328+24P-4S+
- 2x CRS326-24G-2S+, one lost the "bridge" after ROS update
- 4x CAP AC
- CAP AC XL
- RB4011iGS+5HacQ2HnD (CAPsMAN)

Except the one with the lost "bridge" all went smooth and without problems.
Until now everything looks fine :-)
Last edited by Ullinator on Tue Apr 05, 2022 2:51 pm, edited 2 times in total.
 
hecatae
Member Candidate
Member Candidate
Posts: 134
Joined: Thu May 21, 2020 2:34 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:50 pm

Wow, this is great. Now it seems I'll migrate my infra to 7.2 from 6.xx.
MT, great work 👍
I would hold off on that for at least a week, you do not want critical infrastructure on a just released stable.
 
User avatar
eworm
Forum Veteran
Forum Veteran
Posts: 940
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 2:52 pm

/interface ovpn-server server
set auth=sha1,md5
I don't use the openvpn server. I don't think it's a problem, though.
The defaults changed, to get rid:
/interface/ovpn-server/server/set auth=md5,sha1,sha256,sha512;
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 171
Joined: Wed Aug 09, 2017 1:15 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:54 pm

unfortunately, the memory leak is not fixed (hap ac2)
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:55 pm


Don't we need something like "discard-v6-configuration-completely-please-I-am-from-v7" to remove any "historical" data from a router? :)
RouterOS already has such a feature, it is called /system reset-configuration.
That resets the v7 config as well. It would be reasonable to expect a command that removes v6 configuration from a v7 device, to be sure that it will never bite in the future (and reduce the size of backups).
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:56 pm

unfortunately, the memory leak is not fixed (hap ac2)
It will likely never be fixed when there are only reports like that, without supout.rif file sent to support/jira.
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 171
Joined: Wed Aug 09, 2017 1:15 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:58 pm

@peichl I have a ticket open (with supout files), it was just to inform others that it's still not fixed in 7.2 stable
 
RohanAJoshi
Frequent Visitor
Frequent Visitor
Posts: 51
Joined: Thu Jun 10, 2021 12:29 pm

Re: v7.2 is released!

Tue Apr 05, 2022 2:58 pm

*) ccr2004 - improved system stability on CCR2004-12S+2XS;

Thanks a Lot, this fixes long awaited bug of ccr2004 random reboot.
finally wait is over 1.5 Year.
thanks a lot Mikrotik.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 3:00 pm

Wow, this is great. Now it seems I'll migrate my infra to 7.2 from 6.xx.
MT, great work 👍
I would hold off on that for at least a week, you do not want critical infrastructure on a just released stable.
It mainly depends on what features you use and do not use. When you use BGP, you likely want to wait for a 7.3 release. When it is a home router/AP, you could likely upgrade without many issues.
 
Spirch
Frequent Visitor
Frequent Visitor
Posts: 88
Joined: Sat May 03, 2014 5:04 am

Re: v7.2 is released!

Tue Apr 05, 2022 3:09 pm

any hope to get a smaller wifiwave2 packages, i have an early cap ac / hap ac2 version with 256 meg of ram but with the small space, i would love to try it out
 
templeos
just joined
Posts: 15
Joined: Mon Aug 26, 2019 3:58 pm

Re: v7.2 is released!

Tue Apr 05, 2022 3:15 pm

Graphs still not working over https on WebFig. Error 404: Not Found. You should really fix this. Pretty much you fixed hotspot, but not Graphs. This issue is been there for ages.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 3:17 pm

any hope to get a smaller wifiwave2 packages, i have an early cap ac / hap ac2 version with 256 meg of ram but with the small space, i would love to try it out
I have it running on AC3. I am not that impressed as far 5Ghz is concerned. I get more or less the same speeds as the old drivers.
On 2.4 it is a positive step, there I see improvement (speed and stability).
 
User avatar
jimmer
just joined
Posts: 15
Joined: Wed Mar 06, 2019 10:06 am
Location: Tasmania, Australia

Re: v7.2 is released!

Tue Apr 05, 2022 3:23 pm

CAPsMAN broken on my RB3011, both of my CAPS (running 7.1.5) get failed: timeout when trying to register.

e.g.:

Apr 5 07:20:47 aruma-downstairs-cap-hapac2 CAP selected CAPsMAN aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246)
Apr 5 07:21:07 aruma-downstairs-cap-hapac2 CAP connect to aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246) failed: timeout
Apr 5 07:21:07 aruma-downstairs-cap-hapac2 CAP failed to join aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246)
Apr 5 22:21:07 aruma-upstairs-cap-hapac2 CAP connect to aruma-RB3011-gw (B8:69:F4:8E:88:97/6/0) failed: timeout
Apr 5 22:21:07 aruma-upstairs-cap-hapac2 CAP failed to join aruma-RB3011-gw (B8:69:F4:8E:88:97/6/0)

Had to roll back to 7.1.5 on my RB3011 to resolve.. will wait for 7.2.1 for a fix.

EDIT: As soon as I rolled back to 7.1.5 on the RB3011 CAPsMAN Controller:

Apr 5 02:00:19 aruma-RB3011-gw CAPsMAN: [48:8F:5A:DE:EB:BB/23/658e,Join,[48:8F:5A:DE:EB:BB]] joined, provides radio(s): 48:8F:5A:DE:EB:C1,48:8F:5A:DE:EB:C0
Apr 5 22:27:25 aruma-RB3011-gw CAPsMAN: [48:8F:5A:DF:06:17/23/e4ec,Join,[48:8F:5A:DF:06:17]] joined, provides radio(s): 48:8F:5A:DF:06:1D,48:8F:5A:DF:06:1C
Apr 5 22:27:29 aruma-RB3011-gw CAPsMAN: 2Ghz-aruma-downstairs-cap-hapac2-1: selected channel 2412/20-Ce/gn/P(25dBm)
Apr 5 22:27:29 aruma-RB3011-gw CAPsMAN: 2Ghz-aruma-downstairs-cap-hapac2-1: reselect channel in 82800 seconds
Apr 5 22:27:32 aruma-RB3011-gw CAPsMAN: 5Ghz-aruma-downstairs-cap-hapac2-1: selected channel 5200/20-eC/ac/P(23dBm)
Apr 5 22:27:32 aruma-RB3011-gw CAPsMAN: 5Ghz-aruma-downstairs-cap-hapac2-1: reselect channel in 82800 seconds
Apr 5 22:27:35 aruma-RB3011-gw CAPsMAN: 2Ghz-aruma-upstairs-cap-hapac2-1: selected channel 2412/20-Ce/gn/P(25dBm)
Apr 5 22:27:35 aruma-RB3011-gw CAPsMAN: 2Ghz-aruma-upstairs-cap-hapac2-1: reselect channel in 82800 seconds
Apr 5 22:27:39 aruma-RB3011-gw CAPsMAN: A8:47:4A:XX:XX:XXX@5Ghz-aruma-downstairs-cap-hapac2-1-1 connected, signal strength -73
Apr 5 22:27:40 aruma-RB3011-gw CAPsMAN: B8:69:F4:XX:XXX:XX@5Ghz-aruma-downstairs-cap-hapac2-1-1 connected, signal strength -57
Apr 5 22:27:41 aruma-RB3011-gw CAPsMAN: 5Ghz-aruma-upstairs-cap-hapac2-1: selected channel 5240/20-eC/ac/P(23dBm)
Apr 5 22:27:41 aruma-RB3011-gw CAPsMAN: 5Ghz-aruma-upstairs-cap-hapac2-1: reselect channel in 82800 seconds
Apr 5 22:27:43 aruma-RB3011-gw CAPsMAN: 5C:C5:D4:XXX:XX:XX@5Ghz-aruma-downstairs-cap-hapac2-1-1 connected, signal strength -86
Last edited by jimmer on Tue Apr 05, 2022 3:29 pm, edited 1 time in total.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Tue Apr 05, 2022 3:29 pm

CAPsMAN broken on my RB3011, both of my CAPS (running 7.1.5) get failed: timeout when trying to register.

e.g.:

Apr 5 07:20:47 aruma-downstairs-cap-hapac2 CAP selected CAPsMAN aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246)
Apr 5 07:21:07 aruma-downstairs-cap-hapac2 CAP connect to aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246) failed: timeout
Apr 5 07:21:07 aruma-downstairs-cap-hapac2 CAP failed to join aruma-RB3011-gw (::ffff:10.1.xxx.xxx:5246)
Apr 5 22:21:07 aruma-upstairs-cap-hapac2 CAP connect to aruma-RB3011-gw (B8:69:F4:8E:88:97/6/0) failed: timeout
Apr 5 22:21:07 aruma-upstairs-cap-hapac2 CAP failed to join aruma-RB3011-gw (B8:69:F4:8E:88:97/6/0)

Had to roll back to 7.1.5 on my RB3011 to resolve.. will wait for 7.2.1 for a fix.
Seems not to be a general problem, my CAPsMAN on RB4011 (7.2) runs smooth with 5x CAP AC (XL) on 7.1.5. Even the update on the CAPs to 7.2 went smooth, also.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 3:31 pm

runs smooth with 5x CAP AC (XL) on 7.1.5....
Side question: where the hell did you get those ? There is nowhere cAP AC or XL AC to be found anymore ...
 
User avatar
jimmer
just joined
Posts: 15
Joined: Wed Mar 06, 2019 10:06 am
Location: Tasmania, Australia

Re: v7.2 is released!

Tue Apr 05, 2022 3:33 pm

Seems not to be a general problem, my CAPsMAN on RB4011 (7.2) runs smooth with 5x CAP AC (XL) on 7.1.5. Even the update on the CAPs to 7.2 went smooth, also.
[/quote]

Maybe its an RB3011 thing, swapped back to my 7.1.5 partition and it all came back up, even with the 7.2 routerboard routerboot firmware active (didnt roll that back)

Edit: Just to expand, both of my CAP's are hAPac2's running RouterOS 7.1.5, never had this issue upgrading with CAPsMAN failing to register on previous versions. I'll stick to 7.1.5 on the RB3011 for now until somebody can shed some light on what the issue may be.
Last edited by jimmer on Tue Apr 05, 2022 3:45 pm, edited 1 time in total.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Tue Apr 05, 2022 3:34 pm

runs smooth with 5x CAP AC (XL) on 7.1.5....
Side question: where the hell did you get those ? There is nowhere cAP AC or XL AC to be found anymore ...
CAP AC: https://mikrotik.com/product/cap_ac
CAP XL AC: https://mikrotik.com/product/cap_xl_ac

I´ve bought them ca. 1 year ago....

For example: https://www.getic.de/product/routerboard-cap-ac
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 11949
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 3:50 pm

Tjeez ... that's a LOONG changelog indeed ...
Yeah, because it is relative to 7.1. They should have made a changelog relative to 7.2rc7 as well.
100% agree.
The top section should be new since latest RC candidate, like baby fresh spanking new!! ( THANKS JOTNE!!)
(No new stuff added since rc7)
The next section should include all the changes due to the last RC candidate
The next section should include all the changes due to the previous RC candidate and so ON.

In that way all can appreciate where they sit in relation to the changes.
Last edited by anav on Tue Apr 05, 2022 3:54 pm, edited 2 times in total.
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 11949
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 3:51 pm

Wow, this is great. Now it seems I'll migrate my infra to 7.2 from 6.xx.
MT, great work 👍
I would hold off on that for at least a week, you do not want critical infrastructure on a just released stable.
Sage advice, and I would go one step further, wait for the first LONG term release on vers7 !!
 
dave3
just joined
Posts: 23
Joined: Mon Feb 07, 2022 8:06 am

Re: v7.2 is released!

Tue Apr 05, 2022 4:11 pm

The defaults changed, to get rid:
/interface/ovpn-server/server/set auth=md5,sha1,sha256,sha512;
Thanks.
 
User avatar
Hominidae
Member Candidate
Member Candidate
Posts: 298
Joined: Thu Oct 19, 2017 12:50 am

Re: v7.2 is released!

Tue Apr 05, 2022 4:12 pm

any hope to get a smaller wifiwave2 packages, i have an early cap ac / hap ac2 version with 256 meg of ram but with the small space, i would love to try it out
I have it running on AC3. I am not that impressed as far 5Ghz is concerned. I get more or less the same speeds as the old drivers.
...really? I get 500+ Mbps compared to 280Mpbs on my ac3 units, running wifiwave2 (on 7.1.1)
Edit: see viewtopic.php?p=909465#p909378
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 4:41 pm

...really? I get 500+ Mbps compared to 280Mpbs on my ac3 units, running wifiwave2 (on 7.1.1)
Edit: see viewtopic.php?p=909465#p909378
I get 400+ before and after wifiwave2, maybe a tad more on the latter. So really not impressed :lol:
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Tue Apr 05, 2022 4:43 pm

*) pppoe - use default MTU of 1492;
Still waiting for the bugfix for this.

/interface/pppoe-client/monitor [find] once
               status: connected
                  mtu: 1480
This happens when ethernet MTU > 1500 and ISP doesn't support more than 1492 MTU for PPPoE.
As mentioned in the reopened SUP-38224.
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 4:54 pm

Is it from now on recommended to run cpu-frequency set to auto?
I have the strong feel, that "auto" caused problems (lockups, overheating or even device-damage?) in the past.
2022-04-05_15-52.png
You do not have the required permissions to view the files attached to this post.
 
DenisPDA
newbie
Posts: 37
Joined: Tue Sep 04, 2018 5:42 pm

Re: v7.2 is released!

Tue Apr 05, 2022 5:08 pm

hap ac2 weird error
After upgrading from version 7.2rc7 to version 7.2 stable
Interface ETH2 log and status says it was powered on for 1 second
In fact, the cable is physically missing
hAP_AC2_up_7.2rc7_to_7.2_stable.JPG
You do not have the required permissions to view the files attached to this post.
Last edited by DenisPDA on Tue Apr 05, 2022 5:11 pm, edited 1 time in total.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 5:09 pm

It seems that on some devices where the max possible CPU clock was higher than the default, AUTO would crank up the clock to that max value when the device was overloaded.
That does not seem like a good plan. It should not use a higher CPU clock than the recommended value in AUTO mode (no overclocking).
No idea if that was fixed now... is a bit difficult to check.
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Tue Apr 05, 2022 5:16 pm

@pe1chl it will probably never get fixed since not many problems were found to be related to overclocking, or just overlooked as a possible cause(?).
See here, new product: https://mikrotik.com/product/cube_60pro_ac
The same ipq4019 advertised as 448 - 896 MHz instead of the default 716MHz.
So this seems to be the new default, sadly, for these chips.
 
User avatar
Hominidae
Member Candidate
Member Candidate
Posts: 298
Joined: Thu Oct 19, 2017 12:50 am

Re: v7.2 is released!

Tue Apr 05, 2022 5:18 pm

I get 400+ before and after wifiwave2, maybe a tad more on the latter. So really not impressed :lol:
...then you are one of the lucky users, where standard wifi drivers worked good already (never had 300+ here). Maybe you should upgrade your clients to see a difference like I do ;-)
 
han
just joined
Posts: 10
Joined: Fri Oct 30, 2020 11:30 am

Re: v7.2 is released!

Tue Apr 05, 2022 5:28 pm

@Ullinator: I think he meant to buy available cap ac's - also Getic/EuroDK does not have cap ac's in stock, but expects them in mid-June.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 5:37 pm

See here, new product: https://mikrotik.com/product/cube_60pro_ac
The same ipq4019 advertised as 448 - 896 MHz instead of the default 716MHz.
So this seems to be the new default, sadly, for these chips.
Well, when it is used in a link device without a lot of features enabled it likely is not loaded that heavily and the clock remains low.
But when it somehow ends up in a CPU loop or is loaded heavily due to unwise configuration (L7 matchers etc) it could crank up the clock and when it is in hot weather that may not be a good idea.
When we are lucky, there is feedback from the CPU temperature measurement into the clock selection. Difficult to know without documentation.
 
mstefanski
Posts: 0
Joined: Tue Apr 05, 2022 5:43 pm

Re: v7.2 is released!

Tue Apr 05, 2022 5:47 pm

hAP-ac3, after upgrade to 7.2 only 2.4 GHz wifi is announced, 5 GHz is not visible although WiFi interface is present and enabled.

Anyone else facing same issue?

EDIT: got up after almost 10 minutes of waiting.
 
User avatar
Hominidae
Member Candidate
Member Candidate
Posts: 298
Joined: Thu Oct 19, 2017 12:50 am

Re: v7.2 is released!

Tue Apr 05, 2022 5:53 pm

EDIT: got up after almost 10 minutes of waiting.
....standard for DFS channel search/wait on 5GHz band...has always been there (must be, as per country regulations).
 
sinisa
just joined
Posts: 12
Joined: Sun Apr 17, 2011 12:46 am

Re: v7.2 is released!

Tue Apr 05, 2022 5:56 pm

hAP-ac3, after upgrade to 7.2 only 2.4 GHz wifi is announced, 5 GHz is not visible although WiFi interface is present and enabled.

Anyone else facing same issue?

EDIT: got up after almost 10 minutes of waiting.
Radar detection-avoidance?

What is the frequency/channel?
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 6:07 pm

EDIT: got up after almost 10 minutes of waiting.
....standard for DFS channel search/wait on 5GHz band...has always been there (must be, as per country regulations).
Yup. Look no further then this.
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 6:09 pm

*) arm - fixed "auto" CPU frequency setting;
But something was fixed. We do not know.
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 6:13 pm

*) arm - fixed "auto" CPU frequency setting;
But something was fixed. We do not know.
How can you change the frequency on devices which allow to do so ?
 
User avatar
Amm0
Long time Member
Long time Member
Posts: 632
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: v7.2 is released!

Tue Apr 05, 2022 6:23 pm

*) backup - added "force-v6-to-v7-configuration-upgrade" option on backup load to clear RouterOS v7 configuration and trigger reimport of RouterOS v6 route configuration (CLI only);
Don't we need something like "discard-v6-configuration-completely-please-I-am-from-v7" to remove any "historical" data from a router? :)
I'd say this:
force-v6-to-v7-configuration-upgrade=no
But I'm not sure what that does ;).

By the same token, while export format using the spaces, the CLI forces "slash commands" like /ip/address/print syntax – but that's not what export uses. So all stored configuration is V6 format? And ROS stores the old V6 configuration someplace? Very confusing conceptually. But in reality ROS does seem to deal with slash vs space okay. And I haven't seen a V6 route table accidentally get re-applied.
 
petertosh
Frequent Visitor
Frequent Visitor
Posts: 52
Joined: Wed Mar 21, 2018 9:42 am

Re: v7.2 is released!

Tue Apr 05, 2022 6:31 pm

I had a strange experience when I updated my CCR1009-7G-1C from 7.1.5 to 7.2. I updated using winbox and system/packages, router rebooted and came back almost not responsive. Pings to the router were varying wildly in their response time, winbox and terminal commands were extremely slow. It felt like 1 or 0.5 frames per second for a refresh. I tried /tool/profile and there was no particular load, it showed about 1-5 % cpu usage. One reboot didn't help, it came back the same and didn't stabilize in minutes. Fortunately I had copied the previous system to another partition and was able to reboot back to 7.1.5. Everything was back to normal then.

I had the same symptoms a couple of weeks ago while I tried to use a GPON-SFP. While the SFP-module was active, the same symptoms appeared. Pulling the module brought everything back to normal. Therefore I decided that this might be a SFP problem and continued using the ISP GPON-ONT connected by patch cable. But today the symptom came simply by upgrading to V7.2. Has anyone experienced something similar?
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Tue Apr 05, 2022 7:03 pm

How can you change the frequency on devices which allow to do so ?
/system/routerboard/settings/set cpu-frequency=auto
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 7431
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.2 is released!

Tue Apr 05, 2022 7:06 pm

/system/routerboard/settings/set cpu-frequency=
and press <TAB> for see possible values for that model
 
erdavid
just joined
Posts: 6
Joined: Wed Oct 26, 2016 10:04 pm
Location: Paris (France)
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 7:53 pm

Hello,
I just upgraded my RB4011 and no more IPv6 routing... (or firewalling blocking evrything ? even if I piut an acceot as first rule).
Do someone see something similar ?
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Tue Apr 05, 2022 7:54 pm

I just upgraded my RB4011 and no more IPv6 routing... (or firewalling blocking evrything ? even if I piut an acceot as first rule).
You upgraded from what version?
 
User avatar
marlab
just joined
Posts: 18
Joined: Sun Mar 15, 2015 2:48 pm
Location: EU

Re: v7.2 is released!

Tue Apr 05, 2022 8:04 pm

The problem with clock set backwards and "router was rebooted without proper shutdown" every ca. 3h 43min is still there for RB3011 or RB4011. A stack overflow or memory leak? If my calculation is correct - the reboot happens every 13435 seconds.
NTP client is not active. After the reboot clock on the router goes backwards by 3h 43 mins. This was since I've upgraded to v7...



btw: CAPsMAN works fine for me for both RB3011 and 4011. I have 3 x hAP-ac2 attached. OSPF - no issues. VXLAN - no issues.
Last edited by marlab on Tue Apr 05, 2022 8:17 pm, edited 1 time in total.
 
erdavid
just joined
Posts: 6
Joined: Wed Oct 26, 2016 10:04 pm
Location: Paris (France)
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 8:09 pm

I just upgraded my RB4011 and no more IPv6 routing... (or firewalling blocking evrything ? even if I piut an acceot as first rule).
You upgraded from what version?

I upgraded from 7.1.5, just downgraded back to 7.1.5 and I get same problem.. So options are now :
1) I must also downgrade firmware (but How can I do it)
2) Problem is with next router, and it stopped working just when I upgraded...
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Tue Apr 05, 2022 8:20 pm

I upgraded from 7.1.5, just downgraded back to 7.1.5 and I get same problem.. So options are now :
1) I must also downgrade firmware (but How can I do it)
System Routerboard and hit upgrade.
It will align with installed ROS version (so downgrade).
 
TheNetworkBerg
just joined
Posts: 14
Joined: Mon Sep 30, 2019 9:50 am

Re: v7.2 is released!

Tue Apr 05, 2022 8:42 pm

Awesome, have already started labbing 7.2.0, interesting though seems like L3VPN with route reflector still not working correctly, can see my routes dancing to a beat here https://streamable.com/3b8y3j
 
kraken
Trainer
Trainer
Posts: 2
Joined: Wed Dec 05, 2007 8:03 pm

Re: v7.2 is released!

Tue Apr 05, 2022 8:47 pm

I Just upgrade CHR x86_64 from 7.1.5 to 7.2 but now wont start and keeps giving me Kernel panic error
You do not have the required permissions to view the files attached to this post.
 
mafiosa
Member Candidate
Member Candidate
Posts: 240
Joined: Fri Dec 09, 2016 8:10 pm
Location: Kolkata, India
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 8:48 pm

It is time that we have IPv6 torch functionality working. It is a very basic thing.
 
JJT211
newbie
Posts: 48
Joined: Sun Apr 28, 2019 9:01 pm

Re: v7.2 is released!

Tue Apr 05, 2022 8:53 pm

Not sure if this has been reported, as its kind of an unoffical thing, but when upgrading my home RB4011 from 7.1.5 to 7.2 my ATT Gateway bypass using bridge method is no longer working. Did multiple reboots of both gateway and router and still wont obtain dhcp address. I then downgraded back to 7.1.5 and all is working again.
 
ksteink
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Thu Mar 31, 2016 6:54 pm

Re: v7.2 is released!

Tue Apr 05, 2022 9:13 pm

I think I have a new bug (same as I reported over the 7.1.5 version).. Here is the situation:

- I have an RB5009 with version 7.2 (was previously on 7.1.5) that has a S2S VPN using L2TP/IPSec to a remote hEX S (let's call it jump network server).
- The remote hEX S was using v6.49.5 but few days ago I upgrade it to version 7.2 (was previously on 7.1.5)
- The hEX S has L2TP/IPSec S2S VPNs to multiple clients.
- Testing 3 different remote clients (1 x RB4011 with remote IP 10.1.97.1, 1 x hAP AC2 with remote IP 10.1.64.1 and 1 x hEX S with remote IP 10.1.32.2).
- When I need to access the remote clients I go via the S2S VPN from my RB5009 into the hEX S and via noutive routing go via the S2S VPN to any of the 3 remote routes (RB4011, the other hEX S and the hAP AC2).
- The RB4011 and the hAP AC2 responds to ping but I cannot do either SSH or Winbox directly (The connection hangs like waiting to complete the 3 way handshake). The remote hEX S doesn't even respond to ping from my RB5009. but from the hEX S that has the S2S VPN I can ping it.

All my problems started when I upgraded the remote hEX S (let's call it jump network server) from 6.49.5 to 7.2. Before that I could access all the remote devices without a problem.

Let me add tests from RB5009:

To the RB4011: RB5009 --> hEX S (jump network server running 7.2) --> RB4011

[admin@MAK-IE01] > ping 10.1.97.1
SEQ HOST SIZE TTL TIME STATUS
0 10.1.97.1 56 63 177ms173us
1 10.1.97.1 56 63 180ms281us
sent=2 received=2 packet-loss=0% min-rtt=177ms173us avg-rtt=178ms727us max-rtt=180ms281us

[admin@MAK-IE01] > /tool traceroute 10.1.97.1
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 192.168.8.106 0% 4 155.1ms 158.4 155.1 160.7 2.4
2 10.1.97.1 0% 3 172.4ms 174.2 170.5 179.7 4

[admin@MAK-IE01] > /system/ssh user=admin 10.1.97.1 --> Here it hangs and never prompts for credentials

To the hAP AC2: RB5009 --> hEX S (jump network server running 7.2) --> hAP AC2

[admin@MAK-IE01] > ping 10.1.64.1
SEQ HOST SIZE TTL TIME STATUS
0 10.1.64.1 56 63 180ms998us
1 10.1.64.1 56 63 178ms718us
2 10.1.64.1 56 63 182ms464us
3 10.1.64.1 56 63 174ms432us
4 10.1.64.1 56 63 188ms320us
sent=5 received=5 packet-loss=0% min-rtt=174ms432us avg-rtt=180ms986us max-rtt=188ms320us

[admin@MAK-IE01] > /tool/traceroute 10.1.64.1
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 192.168.8.106 0% 4 155.3ms 164.1 155.3 174.1 7.7
2 10.1.64.1 0% 3 173.4ms 176 173.4 181.3 3.7

[admin@MAK-IE01] > /system/ssh user=admin 10.1.64.1 --> Here it hangs and never prompts for credentials

To the hEX S: RB5009 --> hEX S (jump network server running 7.2) --> hEX S

[admin@MAK-IE01] > ping 10.1.32.2
SEQ HOST SIZE TTL TIME STATUS
0 10.1.32.2 timeout
1 10.1.32.2 timeout
2 10.1.32.2 timeout
sent=3 received=0 packet-loss=100%

[admin@MAK-IE01] > /tool/traceroute 10.1.32.2
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 192.168.8.106 0% 1 155.4ms 155.4 155.4 155.4 0
2 100% 1 timeout
3 100% 1 timeout
4 0% 1 0ms

Let me add tests from hEX S (Jump Network Server):

To the RB4011: From hEX S (jump network server running 7.2) --> RB4011

[kirk@IMKS-RO01] > ping 10.1.97.1
SEQ HOST SIZE TTL TIME STATUS
0 10.1.97.1 56 64 26ms455us
1 10.1.97.1 56 64 20ms272us
2 10.1.97.1 56 64 17ms338us
sent=3 received=3 packet-loss=0% min-rtt=17ms338us avg-rtt=21ms355us max-rtt=26ms455us

[kirk@IMKS-RO01] > /tool/traceroute 10.1.97.1
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 10.1.97.1 0% 5 25.8ms 20.6 16.3 25.8 4

[kirk@IMKS-RO01] > /system/ssh user=admin 10.1.97.1
password: --> It type the password I get connection via SSH

To the hAP AC2: From hEX S (jump network server running 7.2) --> hAP AC2

[kirk@IMKS-RO01] > ping 10.1.64.1
SEQ HOST SIZE TTL TIME STATUS
0 10.1.64.1 56 64 26ms462us
1 10.1.64.1 56 64 17ms959us
2 10.1.64.1 56 64 23ms515us
sent=3 received=3 packet-loss=0% min-rtt=17ms959us avg-rtt=22ms645us max-rtt=26ms462us

[kirk@IMKS-RO01] > /tool/traceroute 10.1.64.1
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 10.1.64.1 0% 2 26.3ms 26.3 26.3 26.3 0

[kirk@IMKS-RO01] > /system/ssh user=admin 10.1.64.1
password: --> It type the password I get connection via SSH

To the hEX S: From hEX S (jump network server running 7.2) --> hEX S

[kirk@IMKS-RO01] > ping 10.1.32.2
SEQ HOST SIZE TTL TIME STATUS
0 10.1.32.2 56 64 16ms85us
1 10.1.32.2 56 64 10ms331us
2 10.1.32.2 56 64 10ms215us
sent=3 received=3 packet-loss=0% min-rtt=10ms215us avg-rtt=12ms210us max-rtt=16ms85us

[kirk@IMKS-RO01] > /tool/traceroute 10.1.32.2
Columns: ADDRESS, LOSS, SENT, LAST, AVG, BEST, WORST, STD-DEV
# ADDRESS LOSS SENT LAST AVG BEST WORST STD-DEV
1 10.1.32.2 0% 2 10.2ms 11.1 10.2 12 0.9

[kirk@IMKS-RO01] > /system/ssh user=admin 10.1.32.2
password: --> It type the password I get connection via SSH even from the RB5009 it doesn't even respond to ping.

I have checked routes in both routers and they are good:

From RB5009:

[admin@MAK-IE01] > /ip/route/print
Flags: D - DYNAMIC; X, I, A - ACTIVE; c, s, d, v, y - COPY
Columns: DST-ADDRESS, GATEWAY, DISTANCE
# DST-ADDRESS GATEWAY DISTANCE
DAv 10.1.32.0/19 <l2tp-l2tp-imks-ro01> 1
DAv 10.1.64.0/19 <l2tp-l2tp-imks-ro01> 1
DAv 10.1.96.0/21 <l2tp-l2tp-imks-ro01> 1

From the hEX S (Network Jump Server)

[kirk@IMKS-RO01] > /ip route/print
Flags: D - DYNAMIC; A - ACTIVE; c, s, d, v, y - COPY
Columns: DST-ADDRESS, GATEWAY, DISTANCE
# DST-ADDRESS GATEWAY DISTANCE
DAc 192.168.8.100/32 l2tp-mak-out1 0

Note: I do Source NAT from the RB5009 to the hEX S with the 192.168.100/32 and I have those correctly working

Some my questions are:
- Why can I ping the remote devices but cannot connect to them via SSH and Winbox?
- Why I can ping 2 routers from the RB5009 but there is one that doesn't even respond to ping.

Looks to me that there is a weird or serious bug here based on this behavior. I can access remote devices if I do an SSH from my RB5009 to the hEX S jump server and from there I do another SSH to the target router instead of going directly.

Also checking logs I still see the CHAP Challenge not resolved between remote 6.49.x versions and the hEX S jump Server running 7.2 as seeing in this screenshot:
ROSv7.2 hEX S L2TP CHAP Issue.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
dbnetwork
Posts: 0
Joined: Thu Dec 02, 2021 8:20 pm

Re: v7.2 is released!

Tue Apr 05, 2022 9:25 pm

BGP prefix count :((((
MK why not resolve BGP prefix count?? :(
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 7431
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.2 is released!

Tue Apr 05, 2022 9:30 pm

THIS IS ONLY A BIG MESS...
DO NOT POST EVERY PROBLEM AND DISCUSS ALL HERE,
Open separate topics for each problem AFTER SEARCH IF IS NOT PRESENT ALREADY ONE OPEN topic about the same,
and post here only the link with a brief description...
ALL THIS IS ULESESS AND MAKE ONLY CONFUSION.

How can you expect help if you are just making a big mess?
 
User avatar
JohnTRIVOLTA
Member Candidate
Member Candidate
Posts: 282
Joined: Sun Dec 25, 2016 2:05 pm
Location: BG/Sofia

Re: v7.2 is released!

Tue Apr 05, 2022 9:40 pm

OpenVPN is not working anymore - log:
21:24:37 ovpn,info ovpn-out_1: initializing...
21:24:37 ovpn,info ovpn-out_1: connecting...
21:24:38 ovpn,info ovpn-out_1: using encoding - AES-256-CBC/SHA256
21:24:38 ovpn,info ovpn-out_1: connected
21:24:38 ovpn,info ovpn-out_1: terminating... - explicit peer disconnect
21:24:39 ovpn,info ovpn-out_1: disconnected

OpenVPN server:
model = RouterBOARD M33G
/interface ovpn-server server
set auth=sha1,sha256,sha512 certificate=osrv2 cipher=aes128,aes192,aes256 default-profile=default-encryption \
enabled=yes mode=ethernet netmask=30 port=1199 protocol=udp require-client-certificate=yes
OpenVPN client:
model = RouterBOARD cAP Gi-5acD2nD
/interface ovpn-client
add auth=sha256 certificate=ocl2 cipher=aes256 comment="LOPEN VPN" connect-to=xxxxxxxxxx.sn.mynetname.net disabled=yes \
mac-address=02:64:D9:E0:5E:69 mode=ethernet name=ovpn-out_1 port=1199 profile=L2TP_BCP protocol=udp use-peer-dns=no user=\
LOVPN
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Tue Apr 05, 2022 9:44 pm

deprecate openvpn in routeros! for the love of wireguard peers, get rid of this thing.
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 144
Joined: Wed Apr 25, 2012 5:50 pm
Location: Weiswampach,LUX
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 9:51 pm

Issue with 7.2

I try to upgrade CHR 6.49.5 running DUDE to 7.2.
at reboot "no system package found!"
Kernel panic.
 
Grant
newbie
Posts: 29
Joined: Sat Oct 26, 2013 10:55 am
Location: Ukraine, Dnipro

Re: v7.2 is released!

Tue Apr 05, 2022 10:22 pm

JohnTRIVOLTA only tcp works
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.2 is released!

Tue Apr 05, 2022 10:23 pm

Issue with 7.2

I try to upgrade CHR 6.49.5 running DUDE to 7.2.
at reboot "no system package found!"
Kernel panic.
Dude server isn't released yet for 7.x under any platform that I know of.
 
User avatar
borr
just joined
Posts: 19
Joined: Wed May 18, 2016 10:23 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:39 pm

*) wireguard - fixed IPv6 traffic processing with multiple peers;

IPv6 traffic processing with multiple peers is not fixed, broken since 7.1rc4. Have to reenter allowed address to allow IPv6 but only for one peer. SUP-78547.
 
gotsprings
Forum Guru
Forum Guru
Posts: 1551
Joined: Mon May 14, 2012 9:30 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:50 pm

Audience CPU Frequency bounces all over the place.
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Tue Apr 05, 2022 10:52 pm

Audience CPU Frequency bounces all over the place.
That's the point of having it set to auto.
 
dakobg
Frequent Visitor
Frequent Visitor
Posts: 94
Joined: Mon Nov 06, 2017 8:58 am

Re: v7.2 is released!

Tue Apr 05, 2022 10:56 pm

rb5009
hap ac2
crs305

all devices upgraded and look ok however

ros 7.2rc7 testing > 7.2 stable -> after click download and install -> hardware power off/on was needed for all 3 devices !!!
rb firmware 7.2rc7 testing -> 7.2 stable - no issues

I guess some issue with rb hardware version 7.2.rc7?! (no issues with chr from 7.2rc7 to 7.2 stable)
Last edited by dakobg on Tue Apr 05, 2022 11:00 pm, edited 1 time in total.
 
YO3IPT
just joined
Posts: 5
Joined: Fri Sep 11, 2020 12:37 am

Re: v7.2 is released!

Tue Apr 05, 2022 10:57 pm

Upgraded an RB4011iGS+5HacQ2HnD-IN from 7.1.5 to 7.2
In my configuration I have a bonding interface setup on ether2 and ether3 (balance xor) which is a trunk port to a CRS326.
After the upgrade, the interface disappeared completely. I reloaded a 7.1.5 back-up file on the 7.2 installation and the configuration restored normally.
I did not notice any other problem, IPSec identities remained.
After recovering the RB4011, I also did an upgrade to the CRS326, from 7.1.5 to 7.2, without any issues - the bonding interface was ok.
I also updated a couple of hAP ac2's as well, again without any problems.
In fact, until now, I only encountered problems on upgrade with RB4011. The upgrade from 7.1.3 to 7.1.5 caused an issue with the routerboard firmware. After updating RouterOS, on restart, the router did not come back up and was not accessible anymore. I did a reset to default and on further investigation I discovered that the routerboard firmware reverted to factory default version 6.45.1. I did the firmware upgrade and after that restored the device from back-up.
 
noradtux
just joined
Posts: 22
Joined: Mon May 24, 2021 6:33 pm

Re: v7.2 is released!

Tue Apr 05, 2022 11:07 pm

*) wireguard - fixed IPv6 traffic processing with multiple peers;

IPv6 traffic processing with multiple peers is not fixed, broken since 7.1rc4. Have to reenter allowed address to allow IPv6 but only for one peer. SUP-78547.
Are you sure your config is correct? This was broken before for me aswell. But it has been working since some rc-versions now and still works.
 
User avatar
Chaosphere64
Frequent Visitor
Frequent Visitor
Posts: 81
Joined: Wed Aug 10, 2016 10:19 pm

Re: v7.2 is released!

Tue Apr 05, 2022 11:27 pm

Like with previous v7.x versions my Internet Detect feature was borked after the update (RB4011, hex S, hAP ac2). Disable and re-enable does the trick. No clue why this is ...
 
erdavid
just joined
Posts: 6
Joined: Wed Oct 26, 2016 10:04 pm
Location: Paris (France)
Contact:

Re: v7.2 is released!

Tue Apr 05, 2022 11:54 pm

I upgraded from 7.1.5, just downgraded back to 7.1.5 and I get same problem.. So options are now :
1) I must also downgrade firmware (but How can I do it)
System Routerboard and hit upgrade.
It will align with installed ROS version (so downgrade).
Thanks. Indeed, it seems to be a bug was corrected that lead to this on my particular setting.

My RB4011 is behind a box from my ISP (Free in France). This box will route 8 /64 ranges to the mikrotik, but onky to a link local address (in fe80::/10)
The mac address of the bridge interface is 4A:8F:5A:98:36:82

In 7.1 link local address was fe80::4a8f:5aff:fe98:3682, 7.2 it is fe80::488f:5aff:fe98:3682
Difference is just one bit set to 0, and it is in the definition of EUI64 generation from Mac address. So it seems there was a bug in 7.1, corrected in 7.2 and so I have to change the setting of the ISP box. Everything works now
 
User avatar
Amm0
Long time Member
Long time Member
Posts: 632
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: v7.2 is released!

Wed Apr 06, 2022 12:00 am

Like with previous v7.x versions my Internet Detect feature was borked after the update (RB4011, hex S, hAP ac2). Disable and re-enable does the trick. No clue why this is ...
Perhaps it's just that Detect Internet is adding a dhcp-client if there is no "internet" being detected?

This often an unexpected side-effect of the documented behavior:
an interface can obtain (or has obtained) an address from DHCP (does not apply if DHCP server is also running Detect Internet on the DHCP server interface).
So if an interface does not have a DHCP client listening, detect internet may add one for you – to solve the "can obtain...DHCP address". But this "feature" of internet detect has messed me up before –e.g. an unexpected default route being injected by dhcp-client taking over all routing.
 
User avatar
borr
just joined
Posts: 19
Joined: Wed May 18, 2016 10:23 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:06 am


IPv6 traffic processing with multiple peers is not fixed, broken since 7.1rc4. Have to reenter allowed address to allow IPv6 but only for one peer. SUP-78547.
Are you sure your config is correct? This was broken before for me aswell. But it has been working since some rc-versions now and still works.

Hello noradtux, I'm pretty sure it should suffice:
/interface/wireguard/add listen-port=443 mtu=1420 name=ep3
/interface/wireguard/add listen-port=63016 mtu=1420 name=njalla

/interface/wireguard/peers/add allowed-address=0.0.0.0/0,::/0 endpoint-address=x.x.x.x endpoint-port=51820 interface=njalla public-key="..."
/interface/wireguard/peers/add allowed-address=10.2.1.2/32,fd02:21::2/128 interface=ep3 public-key="..."
/interface/wireguard/peers/add allowed-address=10.2.1.3/32,fd02:21::3/128 interface=ep3 public-key="..."

/routing/table/add name=njalla fib

/ip/address/add address=10.2.0.1/21 interface=lo1 network=10.2.0.0
/ip/address/add address=10.2.1.1/24 interface=ep3 network=10.2.1.0
/ip/address/add address=10.13.37.100/24 interface=njalla network=10.13.37.0

/ip/firewall/nat/add action=masquerade chain=srcnat out-interface=njalla
/ip/firewall/address-list/add address=10.2.0.0/21 list=njalla
/ip/firewall/mangle/add chain=prerouting src-address-list=njalla dst-address-list=!bogon action=mark-routing new-routing-mark=njalla passthrough=no
/ip/firewall/mangle/add chain=forward out-interface=njalla action=change-mss new-mss=clamp-to-pmtu passthrough=no protocol=tcp tcp-flags=syn

/ip/route/add dst-address=0.0.0.0/0 gateway=njalla routing-table=njalla

/ipv6/address/add address=fd03:1337::100/128 interface=njalla
/ipv6/address/add address=fd02:20::1/64 interface=lo1 advertise=yes
/ipv6/address/add address=fd02:21::1/64 interface=ep3 advertise=yes

/ipv6/firewall/nat/add action=masquerade chain=srcnat out-interface=njalla
/ipv6/firewall/mangle/add action=change-mss chain=forward out-interface=njalla new-mss=clamp-to-pmtu passthrough=no protocol=tcp tcp-flags=syn

/ipv6/route/add dst-address=2000::/3 gateway=njalla
 
User avatar
Amm0
Long time Member
Long time Member
Posts: 632
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: v7.2 is released!

Wed Apr 06, 2022 12:19 am

Like with previous v7.x versions my Internet Detect feature was borked after the update (RB4011, hex S, hAP ac2). Disable and re-enable does the trick. No clue why this is ...
Or, if you do follow the docs like:
/interface/detect-internet/set internet-interface-list=all wan-interface-list=all lan-interface-list=all detect-interface-list=all
That will add the detected interfaces to an interface list, as document. But your firewall has rules for WAN or LAN, that intermediate state at start up could get them in the wrong list and "stuck". So a timing issue at start up could get a WAN into a LAN list or vice version. So if you just want to "detect internet" & not modify you /interface/list/member you just need:
/interface/detect-internet/set internet-interface-list=all

as that will not modify your interface lists (but still potentially add a DHCP client, depending on how careful reader you are, "randomly").


I do wish "detect internet" feature worked better actually. And docs are kinda sparse at all the various side-effects of using it... It pretty visible in the iOS app, so we have end customers try to enable it with a rather friendly "Do you want to enable Detect Internet?" & say "sure"... but this seemingly harmless choice has caused issues before....

But it does do what has done what docs say it does.
 
DarkNate
Member
Member
Posts: 429
Joined: Fri Jun 26, 2020 4:37 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:33 am

Do these apply to RB3011? Because I see hardware offloading gets disabled if I enable vlan-filtering on the bridge.

*) bridge - added fast-path and inter-VLAN routing FastTrack support when vlan-filtering is enabled;
*) l3hw - added HW offloaded FastTrack support for inter-VLAN routing;
*) l3hw - fixed HW offloaded NAT;
*) l3hw - fixed HW offloaded routing when using 7 or more VLAN interfaces;
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 144
Joined: Wed Apr 25, 2012 5:50 pm
Location: Weiswampach,LUX
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 12:34 am

Issue with 7.2

I try to upgrade CHR 6.49.5 running DUDE to 7.2.
at reboot "no system package found!"
Kernel panic.
Dude server isn't released yet for 7.x under any platform that I know of.
Dude is back since 7.2 in all plateform
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:40 am

Do these apply to RB3011? Because I see hardware offloading gets disabled if I enable vlan-filtering on the bridge.
No. RB3011 does not support l3hw and fastpath/fasttrack is not hardware offloading either.
On the RB4011, hw offloading on vlan-filtering bridge is supported.
 
DL7JP
Frequent Visitor
Frequent Visitor
Posts: 80
Joined: Sat Oct 19, 2013 4:14 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:48 am

Upgraded RB1100AHx4, RB2011iL, CRS125-24G, cAP Lite, hAP ac, hAP ac^2 and mAP lite without problems.
 
User avatar
clambert
newbie
Posts: 46
Joined: Wed Jun 12, 2019 5:04 am

Re: v7.2 is released!

Wed Apr 06, 2022 1:00 am

Awesome, have already started labbing 7.2.0, interesting though seems like L3VPN with route reflector still not working correctly, can see my routes dancing to a beat here https://streamable.com/3b8y3j
Thanks for the info. Have you tried BGP signaled by VPLS?
 
ormandj
just joined
Posts: 6
Joined: Tue Jun 15, 2021 12:25 am

Re: v7.2 is released!

Wed Apr 06, 2022 4:23 am

CRS328-24P-4S+ still has SFP+ ports flapping when set at 10G. SUP-68278 in from last year about this with 7.x...
 
modsx
Frequent Visitor
Frequent Visitor
Posts: 67
Joined: Wed Feb 24, 2016 3:54 pm

Re: v7.2 is released!

Wed Apr 06, 2022 4:56 am

nRAY 60G link P2MP after update on 7.2 wireless dosnt connect. For the first time outside of long term. Let the devil quench my curiosity.
 
cadillackid
newbie
Posts: 29
Joined: Wed Oct 17, 2007 5:20 pm

Re: v7.2 is released!

Wed Apr 06, 2022 6:19 am


make this ugly red line at least blue, informative
or take it away when PPTP is disabled
I disagree.
That's the right color for that sort of message.
its dumb.. most people know what PPTP is.. but many of us have to work on Old stuff.. we still have devices out in the world running on modems and floppy drives.. not my choice but it works and we get paid to fix them..

same as PPTP.. nope its much less secure but putting red banners makes the customers go bonkers that we are installing insecure equipment. (when its really their stuff that is insecure... )..

if MT wants to put up banners give us a way to turn it off..
 
themis
Posts: 0
Joined: Wed Apr 06, 2022 6:16 am

Re: v7.2 is released!

Wed Apr 06, 2022 6:30 am

upgrade hAP ac^2 from 6.48.4 to 7.2 finish fine
But after upgrade, youtube videos, netflix video too, are very long to start (from 10 to 30s), some video/film pictures in youtube & netflix stay black too, it seems the download is difficult to start.
Never see that with another version.
I've roll back to 6.48.4 to check and videos are working fine again, so I've upgrade again to 7.2 but still the problem

(MKT support contacted)
Last edited by themis on Wed Apr 06, 2022 7:11 am, edited 1 time in total.
 
nsknyc
Posts: 0
Joined: Wed Feb 23, 2022 9:33 pm

Re: v7.2 is released!

Wed Apr 06, 2022 6:56 am

This quite the list. Its insane.
 
notToNew
Member Candidate
Member Candidate
Posts: 173
Joined: Fri Feb 19, 2016 3:15 pm

Re: v7.2 is released!

Wed Apr 06, 2022 7:50 am

upgrade hAP ac^2 from 6.48.4 to 7.2 finish fine
But after upgrade, youtube videos, netflix video too, are very long to start (from 10 to 30s), some video/film pictures in youtube & netflix stay black too, it seems the download is difficult to start.
Never see that with another version.
I've roll back to 6.48.4 to check and videos are working fine again, so I've upgrade again to 7.2 but still the problem

(MKT support contacted)
Did you check CPU Frequence?
Auto does not seem to work in mA hap ap2 aswell
 
themis
Posts: 0
Joined: Wed Apr 06, 2022 6:16 am

Re: v7.2 is released!

Wed Apr 06, 2022 8:00 am

upgrade hAP ac^2 from 6.48.4 to 7.2 finish fine
But after upgrade, youtube videos, netflix video too, are very long to start (from 10 to 30s), some video/film pictures in youtube & netflix stay black too, it seems the download is difficult to start.
Never see that with another version.
I've roll back to 6.48.4 to check and videos are working fine again, so I've upgrade again to 7.2 but still the problem

(MKT support contacted)
I've try to set each of the available values wo any change... so I've set back to auto
 
themis
Posts: 0
Joined: Wed Apr 06, 2022 6:16 am

Re: v7.2 is released!

Wed Apr 06, 2022 8:11 am

upgrade hAP ac^2 from 6.48.4 to 7.2 finish fine
But after upgrade, youtube videos, netflix video too, are very long to start (from 10 to 30s), some video/film pictures in youtube & netflix stay black too, it seems the download is difficult to start.
Never see that with another version.
I've roll back to 6.48.4 to check and videos are working fine again, so I've upgrade again to 7.2 but still the problem

(MKT support contacted)
Did you check CPU Frequence?
Auto does not seem to work in mA hap ap2 aswell
with CPU set at 716Mhz, it is a little bit better (less time to wait) but still not like with v6.48.4, it was playing instantly
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Wed Apr 06, 2022 8:31 am

Are you using IPv6 too? because your config might be broken now.
 
themis
Posts: 0
Joined: Wed Apr 06, 2022 6:16 am

Re: v7.2 is released!

Wed Apr 06, 2022 8:40 am



Did you check CPU Frequence?
Auto does not seem to work in mA hap ap2 aswell
with CPU set at 716Mhz, it is a little bit better (less time to wait) but still not like with v6.48.4, it was playing instantly
No v6, the is little bit complicated, with 2 vpn and som fw rules
I will try to reset the conf and redo it form scratch
 
Hawkeye583
Posts: 0
Joined: Sat Nov 13, 2021 1:15 pm

Re: v7.2 is released!

Wed Apr 06, 2022 9:06 am

hAP ac2 x2 from 7.1.5 OK
hEX POE from 6.49.5 OK
CRS112 from 6.49.5 OK
RB4011iGS from 6.49.5 almost OK
The RB4011 is my main router. I use three ISPs with loadbalancing and failover. One link has a static ip address and the other two are PPPOE links. In 6.49 checking if the gateway responded was done by ping, in 7.2 with a static link everything is ok, but with PPPOE when ping checking is enabled I get a message that the route is invalid and it lights up in red. Additionally, there is some problem with DNS on the router itself, because when checking for updates I get the message could not resolveDNS name, DNS on client stations is working properly. When i go to terminal and ping any name i get this:
invalid value for argument address:
invalid value of mac-address, mac address required
invalid value for argument ipv6-address
while resolving ip-address: could not get answer from dns server
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4 use-doh-server=https://cloudflare-dns.com/dns-query verify-doh-cert=yes
Edit:
Problem is in DNS over HTTPS, any1 know how to resolve this?
Last edited by Hawkeye583 on Wed Apr 06, 2022 10:05 am, edited 1 time in total.
 
themis
Posts: 0
Joined: Wed Apr 06, 2022 6:16 am

Re: v7.2 is released!

Wed Apr 06, 2022 9:26 am



with CPU set at 716Mhz, it is a little bit better (less time to wait) but still not like with v6.48.4, it was playing instantly
No v6, the is little bit complicated, with 2 vpn and som fw rules
I will try to reset the conf and redo it form scratch
After reconfigure from scratch : it is working fine !
So, it meens that's better to export configuration before upgrading, reset the conf after upgrade, then redo all the conf and reboot ... after all is working fine
:)
 
Manfred
just joined
Posts: 13
Joined: Wed Feb 06, 2013 3:45 pm

Re: v7.2 is released!

Wed Apr 06, 2022 10:04 am

Chateau LTE12 completely dead after Upgrading Firmware to 7.2 !!!!
Any idea what to do now ?
 
dudee
Posts: 0
Joined: Sun Feb 23, 2020 10:21 pm
Location: Hungary

Re: v7.2 is released!

Wed Apr 06, 2022 10:19 am

OpenVPN is not working anymore - log:
21:24:37 ovpn,info ovpn-out_1: initializing...
21:24:37 ovpn,info ovpn-out_1: connecting...
21:24:38 ovpn,info ovpn-out_1: using encoding - AES-256-CBC/SHA256
21:24:38 ovpn,info ovpn-out_1: connected
21:24:38 ovpn,info ovpn-out_1: terminating... - explicit peer disconnect
21:24:39 ovpn,info ovpn-out_1: disconnected

OpenVPN server:
model = RouterBOARD M33G
/interface ovpn-server server
set auth=sha1,sha256,sha512 certificate=osrv2 cipher=aes128,aes192,aes256 default-profile=default-encryption \
enabled=yes mode=ethernet netmask=30 port=1199 protocol=udp require-client-certificate=yes
OpenVPN client:
model = RouterBOARD cAP Gi-5acD2nD
/interface ovpn-client
add auth=sha256 certificate=ocl2 cipher=aes256 comment="LOPEN VPN" connect-to=xxxxxxxxxx.sn.mynetname.net disabled=yes \
mac-address=02:64:D9:E0:5E:69 mode=ethernet name=ovpn-out_1 port=1199 profile=L2TP_BCP protocol=udp use-peer-dns=no user=\
LOVPN
Same, my openvpn server TCP broken, cannot connect to.
After i downgrade 7.1.5 works fine.
Last edited by dudee on Wed Apr 06, 2022 1:14 pm, edited 1 time in total.
 
User avatar
armandfumal
Member Candidate
Member Candidate
Posts: 144
Joined: Wed Apr 25, 2012 5:50 pm
Location: Weiswampach,LUX
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 10:38 am

Chateau LTE12 completely dead after Upgrading Firmware to 7.2 !!!!
Any idea what to do now ?
https://help.mikrotik.com/docs/display/UM/Chateau+LTE12
NETInstall procedure
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 171
Joined: Wed Aug 09, 2017 1:15 pm

Re: v7.2 is released!

Wed Apr 06, 2022 10:41 am

Hawkeye583: when the "use-doh-server" parameter is set, the "servers" parameter is ignored. Since you have used an fqdn as the doh server, it can't be resolved.
You either have to create a static A/AAAA record for cloudflare-dns.com or use the ip address in the url.
The easiest would be to set your doh-server=https://1.1.1.1/dns-query
 
Manfred
just joined
Posts: 13
Joined: Wed Feb 06, 2013 3:45 pm

Re: v7.2 is released!

Wed Apr 06, 2022 10:42 am

Netinstall didn't work !
Resetted to factory defaults and then restored the Backup.
Strange thing but for now it looks ok
 
User avatar
herger
newbie
Posts: 26
Joined: Tue Aug 18, 2020 2:48 pm

Re: v7.2 is released!

Wed Apr 06, 2022 10:52 am

Mikrotik's SNMP MIB is not being answered in this release. Updated machine is very colorful in the monitoring right now :-/ apart from that, update on CRS328 went very smooth.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Wed Apr 06, 2022 11:05 am

Netinstall didn't work !
Resetted to factory defaults and then restored the Backup.
Strange thing but for now it looks ok
I didn´t tried netinstall in 7.2 but in my experience netinstall is a pricky thing. :-/
I´ve bought an external USB2ETH adapter (Realtek) only for netinstall and have to disable ALL other network interfaces (incl. Bluetooth) to make it work.
And only a direct connection between MT device and the NIC works, not a connection over a switch.
 
User avatar
denisun
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Wed Jul 16, 2014 6:38 pm
Location: Greece

Re: v7.2 is released!

Wed Apr 06, 2022 11:24 am

In dhcpv6 client when i select add default rout, i get prefix but nothing add in ipv6 address list, so ipv6 for clients does not work.
When i have not add default route and manual add ipv6 address for pool in address list, everything work perfect.
 
Hawkeye583
Posts: 0
Joined: Sat Nov 13, 2021 1:15 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:33 am

Hawkeye583: when the "use-doh-server" parameter is set, the "servers" parameter is ignored. Since you have used an fqdn as the doh server, it can't be resolved.
You either have to create a static A/AAAA record for cloudflare-dns.com or use the ip address in the url.
The easiest would be to set your doh-server=https://1.1.1.1/dns-query
Thank you very much.
I did as you wrote, but later I found in mikrotik help that I should use 1.1.1.1 instead of dns 8.8.8.8. Both methods work without any problems.
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:40 am

Netinstall didn't work !
Resetted to factory defaults and then restored the Backup.
Strange thing but for now it looks ok
I didn´t tried netinstall in 7.2 but in my experience netinstall is a pricky thing. :-/

Indeed it is. When I first received my audience, which came with 6.47.something, I decided to netinstall it just to get to latest 7.2rc (7.2rc3 at that time). It wouldn't go into ether boot mode no matter what I did with the button on the device. Since device was in working condition, I went to set /system/routerboard/settings set boot-device=try-ethernet-once-then-nand and after a reboot, device immediately appeared in netinstall binary. The rest of the process was a smooth ride afterwards.

Mikrotik should really do something about netinstall process ... to be a bit more robust. Documentation is also pretty sparse.
 
Guntis
MikroTik Support
MikroTik Support
Posts: 79
Joined: Fri Jul 20, 2018 1:40 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:44 am

If you have specific improvement ideas in mind that should be added to https://help.mikrotik.com/docs/display/ ... forWindows ,please write to support@mikrotik.com
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:54 am

If you have specific improvement ideas in mind that should be added to https://help.mikrotik.com/docs/display/ ... forWindows ,please write to support@mikrotik.com

My suggestion was as specific as it gets, can't be more specific since netinstall is closed-source project of Mikrotik's. I don't know how to make it more clear: document describing timing of button presses to enter various modes is vague and seems it doesn't apply very well to audience. I even went into trouble of running wireshark and bootp messages never came through during button presses. As I explained, when setting boot mode to try ethernet once, it tried just fine, which IMO rules out problems beyond ether1 of audience.
But there are numerous problem reports and suggestions, one most concrete one is to handle multiple interfaces on machine running netinstall binary gracefully (e.g. present dialog asking user which interface he wants to use).

BTW, I filed very concrete (unrelated) trouble report (SUP-77961) which is sitting there without any response whatsoever since March 25th. So I don't see how e-mailing support@mikrotik with some vague ideas could help you more.
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:36 pm

one most concrete one is to handle multiple interfaces on machine running netinstall binary gracefully (e.g. present dialog asking user which interface he wants to use).
This one would resolve like a tons of issues.
 
marcodmb
just joined
Posts: 3
Joined: Sat Feb 12, 2022 1:57 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:46 pm

OpenVPN client broken with AES-256-CBC since upgraded to RouterOS 7.2 (from 7.1.5), switching to Blowfish 128 works.

OpenVPN server (Ubuntu server, OpenVPN 2.4.7) log, with flapping (up and down) OVPN client interface in my HEX-S:
SIGTERM[soft,remote-exit] received, client-instance exiting
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 12:54 pm

If you have specific improvement ideas in mind that should be added to https://help.mikrotik.com/docs/display/ ... forWindows ,please write to support@mikrotik.com
1. please fix IPv6 on help.mikrotik.com it has been down for quite some time already. when you cannot keep IPv6 working on the webservers it is better to remove it.
2. the netinstall tools (both for Windows and for Linux) need a "network interface selection" capability. the tools use the first available interface which fails on systems with more than one. It tried to netinstall on my Linux box spending lots of time to find this, and it is also reported by others (also on Windows).
 
dickyhk
just joined
Posts: 2
Joined: Sat May 05, 2018 4:18 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:05 pm

Finally a great improvement in OpenVPN compared to previous version.
But I wish it could add TLS static key support in future version.
 
gammy69er
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Sun May 18, 2014 3:01 am

Re: v7.2 is released!

Wed Apr 06, 2022 1:12 pm

Have a new BGP Gateway Stack - Access Switch, Auth server and Border router - CCR 1072 x2 and a CRS317.
Upgraded as our new provider advertises 1M+ routes. Was Buit and tested on 7.1.3/7.1.5.
Border Routes seems happy enough - but freezes up when showing large chunks or routes (on 7.1.5 was just slow). Closing the route window or putting in a filter fixes this (as long as you filter out enough routes to view)
Access router has been in testing for over a month - now falls over every 1-5 hours on 7.2. have caught it 2 times and manually rebooted - but the last 2 times were "watchdog". Just before the last reboot it was showing data throughput to the border ~ 2-3x actual throughput. This was on the screen - updates in winbox were every 40-60seconds and were showing ~ correct throughput. Also - when this dies - the ethernet port fails - and the SFP+ port lights that are connected blink in unison on the act light (normally random with data)
that's the CCR's - the CRS317 seems to be happy enough - no apparent dramas there.
Had yet to put in my second access router - will be doing soon and will roll back the 1072 Acess router to 7.1.5 to hopefully stabilise it... if not will give it a rebuild and see how we go.

Regretting pulling the trigger for the bgp "improvements" considering the build went so well. if i get a chance will update.
 
Guntis
MikroTik Support
MikroTik Support
Posts: 79
Joined: Fri Jul 20, 2018 1:40 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:22 pm

MKX Thank you for your suggestions regarding the Netinstall process. We do take such suggestions into account, and many similar ones are already registered. Though unfortunately, at this time, I can't guarantee their implementation or give any estimates regarding them. As currently, RouterOS itself takes priority development-wise.
My question was more about how documentation could be adjusted, as from our point of view it seems fairly complete. Though I specifically meant Netinstall documentation, seems like your issue was mainly with Etherboot documentation. As for your ticket, it should be soon processed, sorry for the wait, and sending unrelated suggestions, likely won't affect that. This is just to outline that we welcome feedback.

And regarding Etherboot for all devices, the most error-free method is - to press the reset button, keep it pressed, power on the device, and wait until the device shows up in the Netinstall window, then release the button. This holds true for the Audience as well.
Which is described here as well: https://wiki.mikrotik.com/wiki/Manual:E ... set_button

In case anyone has suggestions, please send them to us directly, let's try to keep this topic release specific.
 
User avatar
Ghost
just joined
Posts: 7
Joined: Sun Nov 14, 2010 11:12 pm
Location: Moscow, Russia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 1:32 pm

After update to 7.2 on my hap ac3 CPU settings:

716 is the default frequency for this device.
And if you set the value to "Auto", the warning disappears. But the frequency of the device varies from 448 to 678 (and in some places much higher)
hapac3-00.PNG
You do not have the required permissions to view the files attached to this post.
 
DarkNate
Member
Member
Posts: 429
Joined: Fri Jun 26, 2020 4:37 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:37 pm

Is HW offloading for
/ip routes
limited to certain models? Because all of my routes on RB3011 are not hardware offloaded at all.
*) route - fixed "suppress-hw-offload" update;
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:41 pm

And regarding Etherboot for all devices, the most error-free method is - to press the reset button, keep it pressed, power on the device, and wait until the device shows up in the Netinstall window, then release the button. This holds true for the Audience as well.
Which is described here as well: https://wiki.mikrotik.com/wiki/Manual:E ... set_button
It would be nice when there would be a new selection in System->RouterBoard->settings->Boot Device like "ethernet-if-fail-then-nand".
Sort of like the current "try-ethernet-once-then-nand" but with a timeout and which will stick in the config.
When you have radios mounted up on roofs and in towers it is an uncomfortable situation that should you need to netinstall them after an upgrade disaster, you can only do so with physical access.
It would be better when a device would show up in netinstall after just powercycling it. Of course this would be optional, some people may object to it as being "insecure", but with the outdoor devices on a closed network it should not matter much.
In the past I have set devices to "try-ethernet-once-then-nand" under the assumption that this would exactly be what I need, but unfortunately it gets reset to "nand-if-fail-then-ethernet" after reboot.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:43 pm

Is HW offloading for
/ip routes
limited to certain models? Because all of my routes on RB3011 are not hardware offloaded at all.
Of course it is! It works only on the newest switches that have a switch chip that can do L3 routing.
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Wed Apr 06, 2022 1:47 pm

@MT: Graphing is still broken with 7.2. If activated it breaks regulary my fiber connection between two CRS Switches. The SFP+ modules are on both sides S+85DLC03D onces
hc_155.jpg
After deactivating Graphing the error went away....
The fiber connection is ~35m long
You do not have the required permissions to view the files attached to this post.
 
tuxn
just joined
Posts: 1
Joined: Sat Oct 23, 2021 7:58 pm

Re: v7.2 is released!

Wed Apr 06, 2022 1:52 pm

Is the fix below, which was introduced in 7.2rc2, also included in the final 7.2?
*) crs3xx - improved SFP+/QSFP+ link stability for CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v7.2rc1);
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Wed Apr 06, 2022 2:07 pm

Is the fix below, which was introduced in 7.2rc2, also included in the final 7.2?
*) crs3xx - improved SFP+/QSFP+ link stability for CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices (introduced in v7.2rc1);
If you use CTRL-F in your browser and search for part of that line, you would see it is included in the change log for 7.2 posted in the very first post of this thread.
If it is in the changelog, it should be included.
Makes sense, no ?
 
tuxn
just joined
Posts: 1
Joined: Sat Oct 23, 2021 7:58 pm

Re: v7.2 is released!

Wed Apr 06, 2022 2:21 pm

Is the fix below, which was introduced in 7.2rc2, also included in the final 7.2?
If you use CTRL-F in your browser and search for part of that line, you would see it is included in the change log for 7.2 posted in the very first post of this thread.
If it is in the changelog, it should be included.
Makes sense, no ?
It doesn't make sense to me, I can't find the text.
only that below:
*) crs1xx/2xx - fixed static switch host addresses after link down;
*) crs1xx/2xx - ignore static bridge host addresses (switch unicast-fdb should be used instead);
*) crs3xx - fixed CPU load balancing for ARM dual core devices;
*) crs3xx - fixed QSFP+ interface LEDs;
*) crs3xx - fixed watchdog timer functionality;
*) crs3xx - improved SFP+ interface linking after reboot for CRS312 device;
*) crs3xx - improved maximum allowed ACL rule calculation;
*) crs3xx - improved system stability when creating many ACL rules on CRS317, CRS309, CRS312, CRS326-24S+2Q+ and CRS354 devices;
*) defconf - made "192.168.188.1/24" the default LAN IP address for LTE CPE devices;
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 25250
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v7.2 is released!

Wed Apr 06, 2022 2:25 pm

Yes, changes that are introduced in rc1 and fixed in rc2, will not be mentioned in 7.2, because the changelog is comparison between last 7.1 release. People who are staying on "stable" branch would not have seeen any such issues, they were not affected.
No answer to your question? How to write posts
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Wed Apr 06, 2022 2:26 pm

My bad, only used "*) crs3xx - improved SFP" to search.
So I stand corrected (but it IS included as indicated by normis).
 
DarkNate
Member
Member
Posts: 429
Joined: Fri Jun 26, 2020 4:37 pm

Re: v7.2 is released!

Wed Apr 06, 2022 2:34 pm

Is HW offloading for
/ip routes
limited to certain models? Because all of my routes on RB3011 are not hardware offloaded at all.
Of course it is! It works only on the newest switches that have a switch chip that can do L3 routing.
Weird? I had an old RB2011 and the routes were marked hardware offloaded?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 2:45 pm

To clarify, the H flag does not mean that route IS hardware offloaded, but rather indicates that the route is a candidate to be chosen for hardware offloading.
 
densenator
just joined
Posts: 1
Joined: Tue Mar 10, 2020 3:31 pm

Re: v7.2 is released!

Wed Apr 06, 2022 3:05 pm

After upgrade CAP AC i see warning "cpu not running at default frequency", but i use default frequency is 716 Mhz.
I don't want to set "auto".
Please fix it
 
mseidler
just joined
Posts: 8
Joined: Fri Sep 05, 2014 10:27 am

Re: v7.2 is released!

Wed Apr 06, 2022 3:07 pm

Upgraded packages and firmware on 1x CHR, 1x RB3011, 2x wAP ac, 1x CRS309, 1x CRS112-8P-4S without any issues
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Wed Apr 06, 2022 3:10 pm

After upgrade CAP AC i see warning "cpu not running at default frequency", but i use default frequency is 716 Mhz.
I don't want to set "auto".
Please fix it
Why?
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Wed Apr 06, 2022 3:12 pm

Set it at 716, ignore the warning.
 
mafiosa
Member Candidate
Member Candidate
Posts: 240
Joined: Fri Dec 09, 2016 8:10 pm
Location: Kolkata, India
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 3:32 pm

Why does RB5009 not show cpu type in system>resources
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Wed Apr 06, 2022 3:33 pm

Set it at 716, ignore the warning.
Shouldn't that be auto ? It's there for a reason.
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Wed Apr 06, 2022 3:38 pm

@holvoetn: It was a reply to viewtopic.php?t=184778#p924417
After upgrade CAP AC i see warning "cpu not running at default frequency", but i use default frequency is 716 Mhz.
I don't want to set "auto".
Please fix it
So, as I've said, the fix is to set it at 716MHz and ignore the warning.
I won't bother to understand why MikroTik devs implemented a half-broken-overclocking scaling governor as to tell you the reason behind it, feel free to ask them!
 
ormandj
just joined
Posts: 6
Joined: Tue Jun 15, 2021 12:25 am

Re: v7.2 is released!

Wed Apr 06, 2022 3:45 pm

Yes, changes that are introduced in rc1 and fixed in rc2, will not be mentioned in 7.2, because the changelog is comparison between last 7.1 release. People who are staying on "stable" branch would not have seeen any such issues, they were not affected.
I am still seeing SFP+ port flapping with CRS328s, that has now spread to ethernet ports as well. SUP-68278 has been updated, yet again, since 7.2 is impacted, not just 7.1. No support has responded to the ticket in months, even though multiple supouts are attached. I've verified with other friends and forum members who have these switches that they encounter the same problems ever since 7.x upgrades.

The switch has been netinstalled with 7.2, reverted to default configuration, then had the RSC applied for my configuration, which is relatively basic. I definitely noticed that disk writes tend to trigger it, and have disabled as many as I can, but the device still periodically writes out.
Last edited by ormandj on Wed Apr 06, 2022 3:54 pm, edited 2 times in total.
 
bronco
just joined
Posts: 16
Joined: Mon Dec 08, 2014 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 3:48 pm

Hi there,
OpenVPN is not working anymore - log:
21:24:37 ovpn,info ovpn-out_1: initializing...
21:24:37 ovpn,info ovpn-out_1: connecting...
21:24:38 ovpn,info ovpn-out_1: using encoding - AES-256-CBC/SHA256
21:24:38 ovpn,info ovpn-out_1: connected
21:24:38 ovpn,info ovpn-out_1: terminating... - explicit peer disconnect
21:24:39 ovpn,info ovpn-out_1: disconnected
Same thing for me on a hex-S with AES-256-CBC/SHA-1 and SHA-256 using TCP-Mode. This broken OpenVPN implementation resets its successfully established connection in an infinite loop.
In RouterOS 7.1.5 everything was fine tough... :-(((

Regards,
bronco
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Wed Apr 06, 2022 4:02 pm

*) arm - fixed "auto" CPU frequency setting;
This was introduced in 7.2rc5. Several users reported over in the 7.2rc5 topic, that using cpu-frequency=auto is either unstable or slows things down (like queues which are quite cpu-intensive). So I am still waiting for a detailed explanation of this changelog entry.
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.2 is released!

Wed Apr 06, 2022 4:06 pm

Upgrading from 6.49.5 to 7.2 - RIP filters removed in migration, added back using new method (Rule) and applied. not sure if anything else missing, but working so far, so assuming just filters were missed in migration
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 4:57 pm

Routing filter or prefix-list was removed? If it was routing filters then please provide the export from v6 routing filters that did not upgrade.
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.2 is released!

Wed Apr 06, 2022 5:03 pm

Routing filter or prefix-list was removed? If it was routing filters then please provide the export from v6 routing filters that did not upgrade.
Good point, Ill have to restore an image to check, but I believe for RIP I was using Prefix Lists and for BGP I use Routing Filters. If using Prefix Lists, are these depreciated in 7,x?
 
aspaargaren
Posts: 0
Joined: Wed Apr 06, 2022 4:51 pm

Re: v7.2 is released!

Wed Apr 06, 2022 5:06 pm

Since the update to 7.2 I have "router was rebooted without proper shutdown" events every few hours.
Installed April 5th at 22:50 hours local time. With firmware reboot at 22:54 hours.
Now April 6th 16:05 hours and I have 22 connection failure events. 2 of them are the update.
The other 20 are unknown spontanious reboots of my routerboard.

I am an employee of my ISP, so I have access to Dslam/ISAM logging.
All 20 PPPoE disconnections are the result of no response from my routerboard.

RB4011iGS+, redundant powered with PSU and PoE.
Other (Unify) hardware has an uptime of 21 days, so no power outtage.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 5:20 pm

If using Prefix Lists, are these depreciated in 7,x?
Yes, prefix lists are deprecated, now everything is filtered by routing filters.
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1887
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: v7.2 is released!

Wed Apr 06, 2022 5:34 pm

mrz write:
Yes, prefix lists are deprecated, now everything is filtered by routing filters.
Maybe some Guide / Introduction into changes to Router7.
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 5:42 pm

added note to the basic example page
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 6:52 pm

mrz write:
Yes, prefix lists are deprecated, now everything is filtered by routing filters.
Maybe some Guide / Introduction into changes to Router7.
There is documentation at https://help.mikrotik.com/docs/display/ROS/Routing
Unfortunately not really a "when you are used to doing things like this, now it is done like that".
 
polmax
just joined
Posts: 2
Joined: Mon Jul 20, 2020 11:36 am

Re: v7.2 is released!

Wed Apr 06, 2022 7:06 pm

Since the update to 7.2 I have "router was rebooted without proper shutdown" events every few hours.
Installed April 5th at 22:50 hours local time. With firmware reboot at 22:54 hours.
Now April 6th 16:05 hours and I have 22 connection failure events. 2 of them are the update.
The other 20 are unknown spontanious reboots of my routerboard.
The same problem on firmware 7.2, rolled back to 7.1.5, the problem is gone. Model: RB4011iGS+5HacQ2HnD
 
Rafale30
just joined
Posts: 15
Joined: Mon Jul 27, 2020 7:34 pm

Re: v7.2 is released!

Wed Apr 06, 2022 7:18 pm

Hi all,

Someone have a problem with route -> checking gateway with bfd, on hEX, on V7.2 (fresh install) ?

I have this config who works like a charm on hEX/Chateau (tuned for each, of course) on 7.1.3 (not tested on newer):
/ip/firewall nat
add comment="Masquerade LTE NOMINAL" chain=srcnat src-address=192.168.1.0/24 action=masquerade out-interface=lte1
add comment="Masquerade LTE SECOURS" chain=srcnat src-address=192.168.1.0/24 action=masquerade out-interface=ether2
/ip route
add check-gateway=bfd comment="Check DNS via LTE NOMINAL" disabled=no distance=1 dst-address=4.2.2.2/32 gateway=lte1 pref-src="" routing-table=main scope=11 suppress-hw-offload=no target-scope=10
/ip route
add check-gateway=bfd comment="Bascule flux vers LTE NOMINAL via check DNS" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=4.2.2.2 pref-src="" routing-table=main scope=10 suppress-hw-offload=no target-scope=12
/ip route
add check-gateway=bfd comment="Bascule flux vers LTE SECONDAIRE" disabled=no distance=5 dst-address=0.0.0.0/0 gateway=192.168.50.1 pref-src="" routing-table=main scope=10 suppress-hw-offload=no target-scope=12
And the bfd seems doesn't work anymore on v7.2 :-(. I have test with ping, but the delay is too long.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Wed Apr 06, 2022 7:30 pm

BFD is not yet implemented :-(
 
Rafale30
just joined
Posts: 15
Joined: Mon Jul 27, 2020 7:34 pm

Re: v7.2 is released!

Wed Apr 06, 2022 7:43 pm

BFD is not yet implemented :-(
??? But the functionality is present in V7.1.3 and functioning ?
 
sinisa
just joined
Posts: 12
Joined: Sun Apr 17, 2011 12:46 am

Re: v7.2 is released!

Wed Apr 06, 2022 8:02 pm

Hi there,
OpenVPN is not working anymore - log:
21:24:37 ovpn,info ovpn-out_1: initializing...
21:24:37 ovpn,info ovpn-out_1: connecting...
21:24:38 ovpn,info ovpn-out_1: using encoding - AES-256-CBC/SHA256
21:24:38 ovpn,info ovpn-out_1: connected
21:24:38 ovpn,info ovpn-out_1: terminating... - explicit peer disconnect
21:24:39 ovpn,info ovpn-out_1: disconnected
Same thing for me on a hex-S with AES-256-CBC/SHA-1 and SHA-256 using TCP-Mode. This broken OpenVPN implementation resets its successfully established connection in an infinite loop.
In RouterOS 7.1.5 everything was fine tough... :-(((

Regards,
bronco
My error message is
apr/05 22:10:33 ovpn,info ovpn-4net: initializing...
apr/05 22:10:33 ovpn,info ovpn-4net: connecting...
apr/05 22:10:36 ovpn,info ovpn-4net: using encoding - AES-256-CBC/SHA1
apr/05 22:10:36 ovpn,info ovpn-4net: connected
apr/05 22:10:41 ovpn,info ovpn-4net: terminating... - peer disconnected
apr/05 22:10:41 ovpn,info ovpn-4net: disconnected
but other things are the same: infinite loop of connect-disconnect after upgrade to 7.2

I guess some of these fixes "fixed" it really good:
*) ovpn - added SHA2 authentication algorithm support;
*) ovpn - added hardware acceleration support for IPQ4018/IPQ4019 and AL* series chipsets;
*) ovpn - added option to send disconnect message in UDP mode;
*) ovpn - fixed large option message parsing;
*) ovpn - improved UDP session handling;
*) ovpn - improved memory allocation on Tile in "ethernet" mode;
*) ovpn - improved system stability in high load scenarios;
Btw, router is HEX 750gr3
OpenVPN was fine in prevous 7.1.x. (yes, I know I should move to WireGuard, that is the only reason I switched to 7.x, but there are reasons to have working openvpn)
Also works in all 7.2.rc-somethings
 
User avatar
SiB
Forum Guru
Forum Guru
Posts: 1887
Joined: Sun Jan 06, 2013 11:19 pm
Location: Poland

Re: v7.2 is released!

Wed Apr 06, 2022 8:04 pm

pe1chl write:
There is documentation at https://help.mikrotik.com/docs/display/ROS/Routing
Unfortunately not really a "when you are used to doing things like this, now it is done like that".
Exactly, that many changes should be like perfect occasion to separate like wiki for ros6 and new one Jira documentation for ros7 and then it's easy for us then to read/learn from begin.
Or create a Guide as "when you are used to doing things like this, now it is done like that".
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Wed Apr 06, 2022 8:52 pm

That is already what it is right now, wiki is only for v6 and help is for v7.
And here is the document to get you started with ROS v7:
https://help.mikrotik.com/docs/display/ ... g+Examples
 
bongani
just joined
Posts: 7
Joined: Thu Sep 13, 2012 9:22 pm

Re: v7.2 is released!

Wed Apr 06, 2022 8:54 pm

RB4011iGS+ RouterOS upgrade from 7.1.5 to 7.2 completed with no issues. Lost all configuration under /interface/vlan after reboot to have firmware upgraded from 7.1.5 to 7.2
 
jtacheoptg
Posts: 0
Joined: Wed Apr 06, 2022 10:08 pm

Re: v7.2 is released!

Wed Apr 06, 2022 10:11 pm

Was previously on an RB4011 on version 6.48 and tried out an RB5009 on version 7.2.

SNMP trap v2 for link status appears to be broken.

Wireshark doesn't recognize it as SNMP and my software is giving this error message when parsing the UDP payload as SNMP:

Parsing Error: BerError(InvalidTag)
 
DarkNate
Member
Member
Posts: 429
Joined: Fri Jun 26, 2020 4:37 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:03 pm

To clarify, the H flag does not mean that route IS hardware offloaded, but rather indicates that the route is a candidate to be chosen for hardware offloading.
That's a bad UI/UX/Status design - HW-Off-Candidate would make more sense? The current implementation is misleading us. And maybe an actual flag that confirms whether a route is hardware offloaded or not.
 
jeetlal
just joined
Posts: 13
Joined: Mon Oct 08, 2018 8:14 pm

Re: v7.2 is released!

Wed Apr 06, 2022 11:27 pm

hi

webfig >IP>ROUTES>ADD>
in gateway Field Drop down getaway selection list missing in 7.2
I have to manualy enter gateway

v6 ok
 
szaboistvan007
just joined
Posts: 8
Joined: Mon Dec 28, 2020 9:52 pm

Re: v7.2 is released!

Thu Apr 07, 2022 12:07 am

My HAP AC3 got bricked by this update. However I could reinstall 7.2 from netinstall
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Thu Apr 07, 2022 12:10 am

Upgraded at home:
Hex
hAP AC3
hAP AC2
hAP
map Lite
CHR

No problems so far upgrading nor afterwards. From the limited time it was active on Hex (updated around 09h00) it "looks" like that memory leak is still present.
Usage is slightly going up every hour without any clear indication what causes it.
Upgraded remote:
mAP
cAP AC
cAP Lite
SXT LTE6
No issues detected.
 
hcuk94
just joined
Posts: 2
Joined: Sun Jul 21, 2019 11:39 am

Re: v7.2 is released!

Thu Apr 07, 2022 1:10 am

This version also broke OpenVPN for me, have rolled back to 7.1.5 for now and it is working again with no issues.
 
bda
Member Candidate
Member Candidate
Posts: 189
Joined: Fri Sep 03, 2010 11:07 am

Re: v7.2 is released!

Thu Apr 07, 2022 1:23 am

Hi,
OpenVPN with UDP still does not work.
One UDP session and CCR goes reboot with kernel failure.
Very bad.

By the way, upgrading x86 to 7.2 causes first boot to kernel failure, next reboot goes to working state but with failed sshd. Only key regeneraton solve the issue...
Very strange situation.
OpenVPN with UDP still does not work.
 
bda
Member Candidate
Member Candidate
Posts: 189
Joined: Fri Sep 03, 2010 11:07 am

Re: v7.2 is released!

Thu Apr 07, 2022 1:25 am

This version also broke OpenVPN for me, have rolled back to 7.1.5 for now and it is working again with no issues.
Do you have a working openvpn with UDP on 7.1.5 ?
 
brg3466
Member Candidate
Member Candidate
Posts: 141
Joined: Sat Aug 01, 2015 7:29 am

Re: v7.2 is released!

Thu Apr 07, 2022 4:05 am

RB5009
repartition doesn't work.
 
User avatar
deadkat
Frequent Visitor
Frequent Visitor
Posts: 59
Joined: Sun Nov 15, 2020 11:14 pm
Location: Alabama, USA

Re: v7.2 is released!

Thu Apr 07, 2022 5:17 am

In the past I have set devices to "try-ethernet-once-then-nand" under the assumption that this would exactly be what I need, but unfortunately it gets reset to "nand-if-fail-then-ethernet" after reboot.
could something like this work?
/system/scheduler/add name="set-boot-mode" disabled=no start-time=startup interval=0 on-event="/system/routerboard/settings/set boot-device=try-ethernet-once-then-nand"
 
ivicask
Member
Member
Posts: 358
Joined: Tue Jul 07, 2015 2:40 pm
Location: Croatia, Zagreb

Re: v7.2 is released!

Thu Apr 07, 2022 6:23 am

Cpu speed setting still missing on 4011, can't even view cpu current speed nowhere in resources.
 
gammy69er
Frequent Visitor
Frequent Visitor
Posts: 58
Joined: Sun May 18, 2014 3:01 am

Re: v7.2 is released!

Thu Apr 07, 2022 7:19 am

Have a new BGP Gateway Stack - Access Switch, Auth server and Border router - CCR 1072 x2 and a CRS317.
Upgraded as our new provider advertises 1M+ routes. Was Buit and tested on 7.1.3/7.1.5.
Border Routes seems happy enough - but freezes up when showing large chunks or routes (on 7.1.5 was just slow). Closing the route window or putting in a filter fixes this (as long as you filter out enough routes to view)
Access router has been in testing for over a month - now falls over every 1-5 hours on 7.2. have caught it 2 times and manually rebooted - but the last 2 times were "watchdog". Just before the last reboot it was showing data throughput to the border ~ 2-3x actual throughput. This was on the screen - updates in winbox were every 40-60seconds and were showing ~ correct throughput. Also - when this dies - the ethernet port fails - and the SFP+ port lights that are connected blink in unison on the act light (normally random with data)
that's the CCR's - the CRS317 seems to be happy enough - no apparent dramas there.
Had yet to put in my second access router - will be doing soon and will roll back the 1072 Acess router to 7.1.5 to hopefully stabilise it... if not will give it a rebuild and see how we go.

Regretting pulling the trigger for the bgp "improvements" considering the build went so well. if i get a chance will update.

Update - Rolled back access - Also installed the Planned secondary Access (ros 6.49.5 - ccr1016). Access 1 now stable again, but stille a little jerky (takes about 10 seconds to remove a PPPoE session when hitting remove - longer the more sessions exist)
1016 is fine - no issues with load or latency.
Border 1 feels laggy. Reading from the route tables in winbox is sooooo slow - and the 1M+ International provider is disabled - just have 100K+ from a local exchange. Chuggs down hard.
Will be prepping Actual Border 2 today and installing tonight, as the test build was done with a really old 1036 single psu, and the actual need a 1016 to match the Access 2. This will be built on 6.49.5 also (as i have a full config from the 1036 - with edited port names for import)
Once Border 2 is in - Will be likely doing a Wipe and recover of Access 1 - and maybe the same on Border 1. only have tonight and tomorrow to finish up - so may not do just wipe and re-nstall - may do netinstall to CONFIRM firmware is clean... even though these routers were 6.x, 7.1.1, 7.1.3 and then 7.1.5 before now being 7.2 (and access1 back to 7.1.5 downgrade)

Either way - will try to update here when I know more.

As for the crs317 - no issues to note - but was only taken up due to the 1072's going up.
 
b10up
just joined
Posts: 7
Joined: Sat Aug 01, 2020 5:38 pm

Re: v7.2 is released!

Thu Apr 07, 2022 8:36 am

I've upgraded a RB4011. It started to freeze once in every 1-5 hours. All leds going dark (except power) and the router just reboots. In the log i see nothing, only the "router rebooted without proper shutdown".
Had to downgrade to long-term.
Also upgraded several hap ac2 routers, they are okay.
 
MTL7
just joined
Posts: 4
Joined: Fri Nov 26, 2021 9:04 am

Re: v7.2 is released!

Thu Apr 07, 2022 9:07 am

My RB5009 unit just won't resume (Port LEDs not light up at all) operation after I applied the firmware and reboot it. I had to unplug and replug the power socket to bring it back.
Any other RB5009 users has this problem?
 
iT0mT0m
just joined
Posts: 2
Joined: Tue Aug 18, 2015 2:01 pm

Re: v7.2 is released!

Thu Apr 07, 2022 10:18 am

After upgrade CHR from 7.1 to 7.2 OpenVPN stopped working after one day. Currently when I try connect I have registered flag on interface OpenVPN but application can't make connection and CPU on CHR jumps to 100%. After cancel connection CPU still consumes 100%. I tried with TCP and UDP setting but it didn't help. I go back to 7.1.5 Long Term and currently all is working.
 
gabacho4
Frequent Visitor
Frequent Visitor
Posts: 87
Joined: Mon Dec 28, 2020 12:30 pm
Location: Earth

Re: v7.2 is released!

Thu Apr 07, 2022 10:33 am

My RB5009 unit just won't resume (Port LEDs not light up at all) operation after I applied the firmware and reboot it. I had to unplug and replug the power socket to bring it back.
Any other RB5009 users has this problem?
No issues with my RB5009 but, from what I’ve observed, some of the bugs and issues have been wholly dependent on setup and configuration. For example, I power my RB5009 via PoE+ versus the supplied power brick.
 
Theo9216
just joined
Posts: 5
Joined: Sat Jul 28, 2018 8:16 pm

Re: v7.2 is released!

Thu Apr 07, 2022 10:41 am

After upgrade from 6.49.5 to 7.2 RoMon stopped seeing almost all devices in our network. If needed I can post the config here?
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:03 am

I've upgraded a RB4011. It started to freeze once in every 1-5 hours. All leds going dark (except power) and the router just reboots. In the log i see nothing, only the "router rebooted without proper shutdown".
Had to downgrade to long-term.
My RB4011 has an uptime of 1d 15 hours on 7.2 now. It has a very complicated setup.
But previously I have exported my config (/export, not /system backup), netinstalled it on 7.2rc5 and imported the config in the empty router.
Then earlier this week I upgraded that to 7.2
That seems key to a stable router as after that I have not seen the "lost part of config" problem again. And my router never crashed.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:04 am

After upgrade from 6.49.5 to 7.2 RoMon stopped seeing almost all devices in our network. If needed I can post the config here?
Works fine for me...
Try the export-netinstall-import route.
(do not forget show-sensitive with the export)
 
kraal
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Tue Jan 19, 2021 10:24 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:22 am

Tjeez ... that's a LOONG changelog indeed ...
Yeah, because it is relative to 7.1. They should have made a changelog relative to 7.2rc7 as well.
Hi,

RC stands for "release candidate". It's the last stage prior to a release. RC staging occurs after beta staging and unlike it, you stop adding new features. Its objective is "for the agreed set of features" to chase as many bugs as possible prior to an official release. Each new RC fixes issues of the previous RC. Once you consider that there is no existing issue to be fixed prior to release you usually release the last RC "as is". In other words, the "released" version brings nothing new to the last "RC", it's just a "rename". Hence the lack of "changelog relative to 7.2rc7".

Regards,
 
eddieb
Member Candidate
Member Candidate
Posts: 260
Joined: Thu Aug 28, 2014 10:53 am
Location: Netherlands

Re: v7.2 is released!

Thu Apr 07, 2022 11:26 am

Trying to upgrade my test RB1100 ...

routeros-powerpc-7.2.npk missing in the upgrade channel ...

Screenshot 2022-04-07 at 10.23.40.png
You do not have the required permissions to view the files attached to this post.
 
kraal
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Tue Jan 19, 2021 10:24 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:33 am

Changes since last rc (rc7) Find using compare duplicate cells in Excel.
No offense, but RTFM about what a RC is, and how it works would have saved you some time ;-)

https://en.wikipedia.org/wiki/Software_ ... _candidate
https://en.wikipedia.org/wiki/Software_ ... le_release

"Also called production release, the stable release is the last release candidate (RC) which has passed all verifications / tests. The remaining bugs are considered as acceptable"
 
huntermic
Member Candidate
Member Candidate
Posts: 109
Joined: Wed Oct 26, 2016 3:42 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:38 am

Changes since last rc (rc7) Find using compare duplicate cells in Excel.
No offense, but RTFM about what a RC is, and how it works would have saved you some time ;-)

https://en.wikipedia.org/wiki/Software_ ... _candidate
https://en.wikipedia.org/wiki/Software_ ... le_release

"Also called production release, the stable release is the last release candidate (RC) which has passed all verifications / tests. The remaining bugs are considered as acceptable"
Get of your high horse, Mikrotik does not adhere to the known logic of releases.
Test/RC at Mikrotik doesn't mean what you would expect, this you can learn on the forum during the years.
 
User avatar
SecCon
Member Candidate
Member Candidate
Posts: 160
Joined: Mon May 03, 2021 10:52 am

Re: v7.2 is released!

Thu Apr 07, 2022 11:47 am

Bookmarked
 
User avatar
SecCon
Member Candidate
Member Candidate
Posts: 160
Joined: Mon May 03, 2021 10:52 am

Re: v7.2 is released!

Thu Apr 07, 2022 11:49 am



No offense, but RTFM about what a RC is, and how it works would have saved you some time ;-)

https://en.wikipedia.org/wiki/Software_ ... _candidate
https://en.wikipedia.org/wiki/Software_ ... le_release

"Also called production release, the stable release is the last release candidate (RC) which has passed all verifications / tests. The remaining bugs are considered as acceptable"
Get of your high horse, Mikrotik does not adhere to the known logic of releases.
Test/RC at Mikrotik doesn't mean what you would expect, this you can learn on the forum during the years.
Having worked with project mgmt for many years and bitching with devs about versioning for equal amount of years I can only say that the more devs, the more opinions on what the standards are.

Sad.
 
huntermic
Member Candidate
Member Candidate
Posts: 109
Joined: Wed Oct 26, 2016 3:42 pm

Re: v7.2 is released!

Thu Apr 07, 2022 11:52 am


Having worked with project mgmt for many years and bitching with devs about versioning for equal amount of years I can only say that the more devs, the more opinions on what the standards are.

Sad.
So true, unfortunately
 
Kraken2k
Frequent Visitor
Frequent Visitor
Posts: 66
Joined: Wed Oct 01, 2014 1:50 pm
Location: Prague

Re: v7.2 is released!

Thu Apr 07, 2022 11:59 am

Since the update to 7.2 I have "router was rebooted without proper shutdown" events every few hours.
Installed April 5th at 22:50 hours local time. With firmware reboot at 22:54 hours.
Now April 6th 16:05 hours and I have 22 connection failure events. 2 of them are the update.
The other 20 are unknown spontanious reboots of my routerboard.
The same problem on firmware 7.2, rolled back to 7.1.5, the problem is gone. Model: RB4011iGS+5HacQ2HnD
I have also RB4011iGS+5HacQ2HnD updated to 7.2., now with uptime 1 day and 21 hours without any reboots or problems.
 
kraal
Frequent Visitor
Frequent Visitor
Posts: 76
Joined: Tue Jan 19, 2021 10:24 pm

Re: v7.2 is released!

Thu Apr 07, 2022 12:06 pm

No offense, but RTFM about what a RC is, and how it works would have saved you some time ;-)
Get of your high horse, Mikrotik does not adhere to the known logic of releases.
Test/RC at Mikrotik doesn't mean what you would expect, this you can learn on the forum during the years.
Well if that's your experience, in this case: continue relying on excel if you consider it the right thing to do (and hope that they did not forgot to add a line to the changelog).
However IMHO, based on your experience, clients should ask Mikrotik to change the way they work instead of asking them for a "last RC to release" changelog. Don't you think ?
Starting with a a real bug tracker open to the community maybe...
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Thu Apr 07, 2022 12:13 pm

Having worked with project mgmt for many years and bitching with devs about versioning for equal amount of years I can only say that the more devs, the more opinions on what the standards are.

Sad.
"bitching with devs about versioning"? Seriously? No need to "bitch around" with anyone - you should be a project manager and not a yelling choleric.

There are different "defacto standards" and there are "company" standards. Mikrotik adopted the software lifecycle terminoligy and the uses an adapted release-cycle. No need to "bitch" around, why does Mikrotik not just bugfix in RC releases - as wikipedia tells us? We already know they do it differently. Ever since. Honstly, they could call it alpha/beta/trunk or whatever. It does not matter.

They refer to these terms more like:

* beta: we know this is frickin unstable. we shoot out a bunch of untested new features and wait for feedback. YOLO
* RC: we do think this release is maybe worth to be called stable after some cycles
* stable: we do think this release is mostly bug-free. for common functionality at least. please be careful though
* longterm: we do think this is better than stable, as we received not much bug-reports anymore. But we still may backport changes from stable-releases in long-term releases, which may still break long-term. So as always: be aware dear user
 
User avatar
emils
MikroTik Support
MikroTik Support
Topic Author
Posts: 852
Joined: Thu Dec 11, 2014 8:53 am

Re: v7.2 is released!

Thu Apr 07, 2022 12:35 pm

Please stay on topic. This thread is about a particular RouterOS version.
 
hcuk94
just joined
Posts: 2
Joined: Sun Jul 21, 2019 11:39 am

Re: v7.2 is released!

Thu Apr 07, 2022 1:05 pm

This version also broke OpenVPN for me, have rolled back to 7.1.5 for now and it is working again with no issues.
Do you have a working openvpn with UDP on 7.1.5 ?
I'm using TCP for OVPN - which didn't work in 7.2 but is working fine in 7.1.5.
 
jeetlal
just joined
Posts: 13
Joined: Mon Oct 08, 2018 8:14 pm

Re: v7.2 is released!

Thu Apr 07, 2022 1:18 pm

While adding static routes in ip>routes there is no option for gateway selection from drop down list
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Thu Apr 07, 2022 1:22 pm

gateway is not supposed to give you any predefined gateways.
 
RafGan
newbie
Posts: 29
Joined: Mon Jun 06, 2011 6:17 pm
Location: Poland / Silesia

Re: v7.2 is released!

Thu Apr 07, 2022 1:24 pm

No CPU frequency settings and CPU resource print on RB1100Dx4de. Also from console.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Thu Apr 07, 2022 2:05 pm

gateway is not supposed to give you any predefined gateways.
Then why does it present a drop down list? In v6 it gave a list of interfaces.
It could be convenient when it also presents a list of existing gateway addresses (configured on other routes).
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Thu Apr 07, 2022 2:43 pm

how the router is supposed to know which IP address from the subnet is the gateway?
 
brandaoeb
just joined
Posts: 6
Joined: Fri Jan 27, 2017 9:06 am

Re: v7.2 is released!

Thu Apr 07, 2022 2:51 pm

Hi:
Upgrade CCR1009 from. 6.49.5 (working for years with l2tp/ipsec and sstp to version 7.2 ROs V7

It worked but i Lost all Linux clients they do not establish vpn
Windows and Android are ok
Sstp is ok from linux win and Android.
Any idea or help apreciated
Thanks
 
ksteink
Frequent Visitor
Frequent Visitor
Posts: 74
Joined: Thu Mar 31, 2016 6:54 pm

Re: v7.2 is released!

Thu Apr 07, 2022 3:12 pm

WTH???? I wake up this morning and my RB5009 simple crashed. I have upgraded to version 7.2 less than 48 hours ago.

I had to do a hard reset and after that all my VPNs went down with this error:
IPsec Phase 2 error RB5009.png
I have no idea how to solve this as the config looks normal.

Advise?
You do not have the required permissions to view the files attached to this post.
 
User avatar
IPANetEngineer
Trainer
Trainer
Posts: 1592
Joined: Fri Aug 10, 2012 6:46 am
Location: Denver, CO USA
Contact:

Re: v7.2 is released!

Thu Apr 07, 2022 3:21 pm

Successfully upgraded two CCR2216s to 7.2 and did a quick traffic generator test :)
[zuul@ccr2216-02.test.lab.ipa] > interface/monitor-traffic interface=bonding1-200g
                         name:  bonding1-200g
        rx-packets-per-second:      8 274 077
           rx-bits-per-second:       99.5Gbps
     fp-rx-packets-per-second:        498 112
        fp-rx-bits-per-second:        5.9Gbps
          rx-drops-per-second:              0
         rx-errors-per-second:              0
        tx-packets-per-second:            102
           tx-bits-per-second:      484.7kbps
     fp-tx-packets-per-second:              0
        fp-tx-bits-per-second:           0bps
          tx-drops-per-second:              0
    tx-queue-drops-per-second:              0
         tx-errors-per-second:              0

 
User avatar
loloski
Member Candidate
Member Candidate
Posts: 127
Joined: Mon Mar 15, 2021 9:10 pm

Re: v7.2 is released!

Thu Apr 07, 2022 3:25 pm

Do you have data if NAT + Simple Queue is involved on CCR2216s? thanks!
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.2 is released!

Thu Apr 07, 2022 4:06 pm

If using Prefix Lists, are these depreciated in 7,x?
Yes, prefix lists are deprecated, now everything is filtered by routing filters.
That's fine, just in 6.x it seems you can only use filters for RIP but they don't migrate to filters upon upgrading, so its an additional step to account for?
 
User avatar
mrz
MikroTik Support
MikroTik Support
Posts: 6672
Joined: Wed Feb 07, 2007 12:45 pm
Location: Latvia
Contact:

Re: v7.2 is released!

Thu Apr 07, 2022 4:10 pm

Yes, even in v6 prefix lists were left only for compatibility from older versions. Now they are removed and you have to account for that when upgrading.
 
Note
Frequent Visitor
Frequent Visitor
Posts: 78
Joined: Fri Jun 03, 2016 12:39 pm

Re: v7.2 is released!

Thu Apr 07, 2022 4:20 pm

Upgrading from 6.49.5 didnt have internet at all. doh server could not connect cause of invalid certificate. I had to disable and re-enable the "verify doh certificate" box in ip>dns.
 
nexusds
newbie
Posts: 27
Joined: Fri Aug 16, 2019 6:51 am

Re: v7.2 is released!

Thu Apr 07, 2022 4:30 pm

Yes, even in v6 prefix lists were left only for compatibility from older versions. Now they are removed and you have to account for that when upgrading.
ok. i honestly didnt know there was any other way to do filtering without prefix lists in 6.x for RIP. for BGP yes, we use route filtering for that, but not for RIP.
https://wiki.mikrotik.com/wiki/Manual:Routing/RIP
 
ofirule
newbie
Posts: 29
Joined: Tue Mar 26, 2019 6:19 pm

Re: v7.2 is released!

Thu Apr 07, 2022 4:40 pm

After upgrading from v7.1.5 to v7.2 my lte modem interface is not recognized,
modem: Sierra MC7455
[SUP-79169]
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Thu Apr 07, 2022 4:48 pm

how the router is supposed to know which IP address from the subnet is the gateway?
When users are adding static routes to several subnets, it can offer the gateway address of a previously entered gateway.
And of course it can offer interface names for direct traffic (no gateway).
 
User avatar
Amm0
Long time Member
Long time Member
Posts: 632
Joined: Sun May 01, 2016 7:12 pm
Location: California

Re: v7.2 is released!

Thu Apr 07, 2022 5:11 pm

After upgrading from v7.1.5 to v7.2 my lte modem interface is not recognized,
modem: Sierra MC7455
[SUP-79169]
Had the same issue a couple days ago and opened a ticket. I did hear back, MT is testing a fix. It was working in the previous 7.2rc4, but not 7.2rc7 / 7.2
 
webequipped
just joined
Posts: 14
Joined: Tue Oct 13, 2009 7:42 pm

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 6:07 pm

Good morning THTMC...
I installed 7.2 on my rb4011igs_5hacq2hnd_in this AM and it completely killed my ability to connect with Winbox v3.31, btw, from which I preformed the upgrade to v7.2. So just prior to the upgrade Winbox connected just fine. Now when I try to connect I do not even get an error message/code nor any kind of warning, it just simply refuses to connect to my router. I have tried both via IP/port and Mac, in both cases I simply refreshes the winbox screen when I try to connect. Something did flash across the screen but it happens so fast that I am unable to decipher it.

I CAN connect via the web interface, thank god! AND I was able to DOWNGRADE back to the 7.1.5 version I had prior.

Let me know what information I can provide to help amend this issue. I will check back in an hour or so...
 
qntsystem
Posts: 0
Joined: Sat May 03, 2014 7:10 pm

Re: v7.2 is released!

Thu Apr 07, 2022 6:11 pm

Why don't you have to support containers
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 6:12 pm

Good morning THTMC...
I installed 7.2 on my rb4011igs_5hacq2hnd_in this AM and it completely killed my ability to connect with Winbox v3.31, btw, ...
You may want to start with upgrading winbox to 3.35.
 
webequipped
just joined
Posts: 14
Joined: Tue Oct 13, 2009 7:42 pm

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 6:21 pm

That was so painfully obvious... So, the question is why would that upgrade be allowed from a version of Winbox that it does not support? I honestly had no idea that that was the case!
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 6:27 pm

That was so painfully obvious... So, the question is why would that upgrade be allowed from a version of Winbox that it does not support? I honestly had no idea that that was the case!
Don't feel too bad.
It's nowhere to be found in the release notes of this version.
I'm not sure anymore as of which version it was introduced a certain version of winbox is required. I just happened to remember.
 
bda
Member Candidate
Member Candidate
Posts: 189
Joined: Fri Sep 03, 2010 11:07 am

Re: v7.2 is released!

Thu Apr 07, 2022 6:34 pm



Do you have a working openvpn with UDP on 7.1.5 ?
I'm using TCP for OVPN - which didn't work in 7.2 but is working fine in 7.1.5.
Ok... thanks. Understood. But I said about UDP. It is one of the most important feature in v7....
Still not working in any v7 version....
 
bronco
just joined
Posts: 16
Joined: Mon Dec 08, 2014 12:09 pm

Re: v7.2 is released!

Thu Apr 07, 2022 7:03 pm

Ok... thanks. Understood. But I said about UDP. It is one of the most important feature in v7....
Still not working in any v7 version....
So we can sum it up: v7.2 kills OVPN server functionality entirely, UDP mode is still not working and TCP mode isn't working anymore!
 
jeetlal
just joined
Posts: 13
Joined: Mon Oct 08, 2018 8:14 pm

Re: v7.2 is released!

Thu Apr 07, 2022 7:20 pm

how the router is supposed to know which IP address from the subnet is the gateway?

ip>routes>add
in gateway dropdown interface list missing in 7.2

but present in v6

check attachment
You do not have the required permissions to view the files attached to this post.
 
User avatar
normis
MikroTik Support
MikroTik Support
Posts: 25250
Joined: Fri May 28, 2004 11:04 am
Location: Riga, Latvia

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 8:13 pm

That was so painfully obvious... So, the question is why would that upgrade be allowed from a version of Winbox that it does not support? I honestly had no idea that that was the case!
sorry, time machine broken, can't go back into past and change old winbox
No answer to your question? How to write posts
 
User avatar
anav
Forum Guru
Forum Guru
Posts: 11949
Joined: Sun Feb 18, 2018 11:28 pm
Location: Nova Scotia, Canada
Contact:

Re: v7.2 is released!

Thu Apr 07, 2022 8:14 pm

I can see the red hat now!!
"Make Winbox Great Again"
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released! DOWNGRADED

Thu Apr 07, 2022 8:55 pm

That was so painfully obvious... So, the question is why would that upgrade be allowed from a version of Winbox that it does not support? I honestly had no idea that that was the case!
sorry, time machine broken, can't go back into past and change old winbox
Before an upgrade:
4) Make sure you have Winbox 3.35 installed.

That could have been added to the change notes...
Also, that "Before an upgrade" paragraph is still missing from the text shown in the router itself when checking for upgrades!
 
msatter
Forum Guru
Forum Guru
Posts: 2707
Joined: Tue Feb 18, 2014 12:56 am
Location: Netherlands / Nīderlande

Re: v7.2 is released!

Thu Apr 07, 2022 9:27 pm

I can see the red hat now!!
"Make Winbox Great Again"
2024, but first the midterms. So be sure you got your MWGA cap ready!
 
spaxton
Member Candidate
Member Candidate
Posts: 192
Joined: Fri Jan 01, 2010 12:18 pm

Re: v7.2 is released!

Fri Apr 08, 2022 12:45 am

DO NOT UPGRADE!

So many bugs... If You have a working environment in V6.49.5 with OpenVPN and You upgrade to V7.2, OpenVPN will stop working... I didn't manage to make it operational after the upgrade.
 
spaxton
Member Candidate
Member Candidate
Posts: 192
Joined: Fri Jan 01, 2010 12:18 pm

Re: v7.2 is released!

Fri Apr 08, 2022 12:48 am

I can see the red hat now!!
"Make Winbox Great Again"
Yes, the blue ones were far away better.
 
User avatar
derict
just joined
Posts: 7
Joined: Thu Sep 14, 2017 7:06 am

Re: v7.2 is released!

Fri Apr 08, 2022 7:39 am

hAP AC --> Memory Leak / Out-of-Memory every 5 minutes rebooted
Image

hAP AC2 --> Still Problem with Memory Leak / Out-of-Memory
hAP AC2 unusable with using 7.x version
 
User avatar
rushlife
Member Candidate
Member Candidate
Posts: 212
Joined: Thu Nov 05, 2015 12:30 pm
Location: czech republic

Re: v7.2 is released!

Fri Apr 08, 2022 8:04 am

Weird, I am using 7.2 on my hap ac2 for uptime roughly 2 days 6 hrs and no problem whatsoever. Memory usage is about 64MB.
 
User avatar
derict
just joined
Posts: 7
Joined: Thu Sep 14, 2017 7:06 am

Re: v7.2 is released!

Fri Apr 08, 2022 9:10 am

Weird, I am using 7.2 on my hap ac2 for uptime roughly 2 days 6 hrs and no problem whatsoever. Memory usage is about 64MB.
at first I think my hap ac2 is defect, but seeing hap ac on 7.2 definitely the ros
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Fri Apr 08, 2022 9:13 am

Weird, I am using 7.2 on my hap ac2 for uptime roughly 2 days 6 hrs and no problem whatsoever. Memory usage is about 64MB.
at first I think my hap ac2 is defect, but seeing hap ac on 7.2 definitely the ros
I also have hap ac2. Also running ROS 7.2
I am not seeing that problem either ... so it's 2 against 1 now.
Most likely config related.
 
mkx
Forum Guru
Forum Guru
Posts: 7857
Joined: Thu Mar 03, 2016 10:23 pm

Re: v7.2 is released!

Fri Apr 08, 2022 9:18 am

Weird, I am using 7.2 on my hap ac2 for uptime roughly 2 days 6 hrs and no problem whatsoever. Memory usage is about 64MB.
at first I think my hap ac2 is defect, but seeing hap ac on 7.2 definitely the ros
I'd go with ROS ... but triggered by particular configuration. And I guess you would do Mikrotik developers a favour if you created a supout.rif file while running 7.2 slightly before unit would crash/reboot ... and open a support ticket. The supout file would give devs opportunity to analyze the state of device prior to crash.

I've got a hAP ac2 still running 6.x (currently 6.49.3) and it does show memory usage "breathing" ... and it obviously did so for a long time, here's a yearly graph. Device gets rebooted from time to time (mostly due to ROS upgrade), those cause memory usage drops. The unit didn't spontaneously reboot in a few years.


Image
Last edited by mkx on Fri Apr 08, 2022 9:18 am, edited 1 time in total.
 
User avatar
eworm
Forum Veteran
Forum Veteran
Posts: 940
Joined: Wed Oct 22, 2014 9:23 am
Location: Oberhausen, Germany
Contact:

Re: v7.2 is released!

Fri Apr 08, 2022 9:18 am

All my devices are updated to ROS 7.2, including hAP ac2. No memory leak observed for mow... Everything runs perfectly stable here.
Really looks like the memory leak is caused by configuration...
 
holvoetn
Forum Guru
Forum Guru
Posts: 1147
Joined: Tue Apr 13, 2021 2:14 am
Location: Belgium

Re: v7.2 is released!

Fri Apr 08, 2022 9:36 am

I'd go with ROS ... but triggered by particular configuration. And I guess you would do Mikrotik developers a favour if you created a supout.rif file while running 7.2 slightly before unit would crash/reboot ... and open a support ticket. The supout file would give devs opportunity to analyze the state of device prior to crash.

I've got a hAP ac2 still running 6.x (currently 6.49.3) and it does show memory usage "breathing" ... and it obviously did so for a long time, here's a yearly graph. Device gets rebooted from time to time (mostly due to ROS upgrade), those cause memory usage drops. The unit didn't spontaneously reboot in a few years.
On my Hex I observe that "memory creep" thing for quite some ROS7-versions already BUT it seems to taper of after a while. It gets to a certain level and then it hovers there (as if there is background cleaning happening ? Don't know...).
It has not yet caused a spontaneous reboot (and I got enough triggers to be notified should that happen).
Problematic ? For me not but I can imagine given some configurations it may be the case.
Should it be solved ? Definitely yes.
 
User avatar
osc86
Member Candidate
Member Candidate
Posts: 171
Joined: Wed Aug 09, 2017 1:15 pm

Re: v7.2 is released!

Fri Apr 08, 2022 9:40 am

Like I mentioned earlier, I also have problems with constant reboots on my hap ac2 running 7.2. I don't think it's a hardware defect because with 7.1.5 it runs for days without a reboot.
I created a ticket and already send a few supouts. While I'm waiting for a response from support, I tried to find the cause by disabling zerotier npk, and disabling anything I don't need.
There's just one vlan-aware bridge with like 6 vlans, a wireguard interface, an eoip interface and an ospf instance with like 20 routes, so nothing special.
The decision to not even provide basic debugging tools like top, mem, strace doesn't make it easier for us to help finding the problem...
 
User avatar
derict
just joined
Posts: 7
Joined: Thu Sep 14, 2017 7:06 am

Re: v7.2 is released!

Fri Apr 08, 2022 10:02 am



at first I think my hap ac2 is defect, but seeing hap ac on 7.2 definitely the ros
I also have hap ac2. Also running ROS 7.2
I am not seeing that problem either ... so it's 2 against 1 now.
Most likely config related.
But in 7.1.5 works perfectly, then 7.2 no configuration change turn to memory-leak

i'm using bonding, ovpn/l2tp, ipv6 and jumbo frame
 
kswong
just joined
Posts: 11
Joined: Mon May 11, 2020 6:21 pm

Re: v7.2 is released!

Fri Apr 08, 2022 10:47 am

Default speed is AUTO ??!!


rb5009.jpg
hapac2.jpg
You do not have the required permissions to view the files attached to this post.
 
brandaoeb
just joined
Posts: 6
Joined: Fri Jan 27, 2017 9:06 am

Re: v7.2 is released!

Fri Apr 08, 2022 11:34 am

Hi:
CCR1009 after upgrade from 6.49.5 to 7.2 can NOT connect L2TP/IPSEC from linux clients (debian ubuntu mint etc).

I CAN connect L2TP/IPSEC from linux clients to RB400, RB750G3 so it must be a bug on CCR tile with linux clients ( all the same thing).

No solution till now !!......
 
R1st0
just joined
Posts: 7
Joined: Wed Feb 14, 2018 10:08 am

Re: v7.2 is released!

Fri Apr 08, 2022 11:56 am

1) Support for Ethernet link speed reporting via TR69 is in the 6.49 ROS. Will it come in ROS v7 aswell?
2) Will "tr069-client - accept 200-299 codes for HTTP diagnostics" be fixed in v6 ROS?
 
User avatar
benlg
just joined
Posts: 6
Joined: Mon Jan 31, 2022 2:50 pm

Re: v7.2 is released!

Fri Apr 08, 2022 11:59 am

Default speed is AUTO ??!!
Yes, set it to auto, and don't bother anymore with CPU speed...
OS will manage it, to properly handle high load, and to save some power during idle periods.
Green router :)
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Fri Apr 08, 2022 12:26 pm

Yes, trust the system!
RB5009 - auto:
RB5009 - auto - 1.png
RB5009 - auto - 2.png
vs RB5009 @ 1400:
RB5009 - 1400 - 1.png
RB5009 - 1400 - 2.png
I like my full speed, thank you! :)
You do not have the required permissions to view the files attached to this post.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Fri Apr 08, 2022 1:17 pm

The decision to not even provide basic debugging tools like top, mem, strace doesn't make it easier for us to help finding the problem...
Well, there is "profile" and "graphing". It could be useful to have a more detailed view in "profile" and a memory column.
I have never seen a tendency of increasing memory usage except in the DNS resolver. That thing, IMHO, is total crap.
It has unjustified limitations, silly behavior, and repeated occurrences of memory leaks.
When anyone is fighting with memory leaks, at least try to rule out the DNS resolver. Disable DoH. Watch the cache size. When having complicated requirements, use another device (e.g. a Raspberry Pi) externally to provide the function, at least you can see if the problem goes away.
 
csi
newbie
Posts: 31
Joined: Wed Mar 02, 2016 10:05 am

Re: v7.2 is released!

Fri Apr 08, 2022 3:23 pm

OpenVPN is not working anymore - log:
21:24:37 ovpn,info ovpn-out_1: initializing...
21:24:37 ovpn,info ovpn-out_1: connecting...
21:24:38 ovpn,info ovpn-out_1: using encoding - AES-256-CBC/SHA256
21:24:38 ovpn,info ovpn-out_1: connected
21:24:38 ovpn,info ovpn-out_1: terminating... - explicit peer disconnect
21:24:39 ovpn,info ovpn-out_1: disconnected

OpenVPN server:
model = RouterBOARD M33G
/interface ovpn-server server
set auth=sha1,sha256,sha512 certificate=osrv2 cipher=aes128,aes192,aes256 default-profile=default-encryption \
enabled=yes mode=ethernet netmask=30 port=1199 protocol=udp require-client-certificate=yes
OpenVPN client:
model = RouterBOARD cAP Gi-5acD2nD
/interface ovpn-client
add auth=sha256 certificate=ocl2 cipher=aes256 comment="LOPEN VPN" connect-to=xxxxxxxxxx.sn.mynetname.net disabled=yes \
mac-address=02:64:D9:E0:5E:69 mode=ethernet name=ovpn-out_1 port=1199 profile=L2TP_BCP protocol=udp use-peer-dns=no user=\
LOVPN
Same, my openvpn server TCP broken, cannot connect to.
After i downgrade 7.1.5 works fine.
Same for me :-(
 
zwets
Posts: 0
Joined: Sat Mar 05, 2022 2:39 am

Re: v7.2 is released!

Fri Apr 08, 2022 3:46 pm

Watch out, upgrade and reboot seemed OK, did the reboot to update the firmware and now it's bricked. RB4011 with Wifi. Family is about to riot.

<edit> I have reset it and not netinstalled. ROS was then at 7.2 and firmware at 6.44.4 and all is OK. Updating the firmware to 7.2 makes the same brick behaviour. I am going to use 7.1.5 firmware and 7.2 ROS for now.

Same here: RB4011 (without WiFi) bricked. Upgrade and reboot fine, update firmware and reboot fine. It then ran fine for about 24h, then sudden death. I can't even reset it. It just intermittently flashes the SFP+ light, then all port lights.

Update: managed to get back to it with netinstall, no other resets worked. Now reinstalling 7.2 and will put it in the rack again. Had no issues (so far) with our two CRS305-1G-4S+ and one CRS112-8P-4S, but looking at other posts here, it seems something is going wrong with the RB4011 and 7.2.
 
felixka
newbie
Posts: 41
Joined: Mon Oct 19, 2020 4:12 am

Re: v7.2 is released!

Fri Apr 08, 2022 5:19 pm

Yes, trust the system!

I like my full speed, thank you! :)
Cannot confirm:
RB5009 ROS7.2 / PPPoE (MTU 1500) on VLAN on Ethernet with MTU 1508

1400 MHz fixed
5009-1400.png
Auto:
5009-auto.png
You do not have the required permissions to view the files attached to this post.
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Fri Apr 08, 2022 5:42 pm

Try IPv6, not something that's done under fasttrack.
 
winap
just joined
Posts: 19
Joined: Thu Sep 23, 2021 10:57 pm

Re: v7.2 is released!

Fri Apr 08, 2022 5:43 pm

felixka and Znevna
When do you bought a router? Is there any difference between HW revision?
Or how long cable do you have? From ISP...
Thanks
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Fri Apr 08, 2022 6:00 pm

Not relevant. If you search the forum for problems regarding the cpu frequency scaling governor you'll find many mentions of problems, from unnecessary overclocking tiny devices (hAP ac2 as example) to underperforming under certain loads (not reaching the max clock when required).
Feel free to do your own tests! (but not the ones that don't use the CPU very much like the speedtest posted above by felixka).
But all this is offtopic, as it's a general issue with the "auto" setting since it was introduced, back in 6.48.
Last edited by Znevna on Fri Apr 08, 2022 6:07 pm, edited 1 time in total.
 
felixka
newbie
Posts: 41
Joined: Mon Oct 19, 2020 4:12 am

Re: v7.2 is released!

Fri Apr 08, 2022 6:05 pm

Try IPv6, not something that's done under fasttrack.
My ISP does not offer IPv6. And the HE.net Tunnel I have as an alternative is not fast enough to highlight the problem, if there was one. So I assume I cannot verify the problem you're having, but it sounds logical to me that it could exist under the circumstances you mentioned.
felixka and Znevna
When do you bought a router? Is there any difference between HW revision?
Or how long cable do you have? From ISP...
Thanks
I think the difference between fasttrack and non-fasttrack Znevna mentioned is much more likely to be at play here. I have not heard of there being different HW Revisions for the 5009. Also my ISP provides a fibre, so I don't believe the length of the cable matters as long as the signal is within the ONTs RX sensitivity and TX power budget, which in my case it very well is.
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Fri Apr 08, 2022 6:09 pm

You could try the same speedtest with fasttrack rule disabled, but I doubt you'll see such a difference like I saw above, since the IPv6 network stack resource handling EVEN IN ROS 7 still needs some work, and IPv4 might be a little better at this.
 
winap
just joined
Posts: 19
Joined: Thu Sep 23, 2021 10:57 pm

Re: v7.2 is released!

Fri Apr 08, 2022 6:21 pm

Why I writing it...When I just a little bit plug a cable, the orange LED is ON, and the cable is still outside.
Some users has problems with 2.5G port and CPU frequency I know..but is there any difference between date of manufactory? Or is the port more sensitivity, so on some situation is more unstable? Because POE and 2.5G port..
But some users has good CPU frequency and some has a trouble..So is there HW difference or just problem with some sort of setup with "unusual" setup?
 
User avatar
Ullinator
just joined
Posts: 3
Joined: Tue Jun 08, 2021 12:53 pm
Location: North-West Germany

Re: v7.2 is released!

Fri Apr 08, 2022 7:04 pm

Watch out, upgrade and reboot seemed OK, did the reboot to update the firmware and now it's bricked. RB4011 with Wifi. Family is about to riot.

<edit> I have reset it and not netinstalled. ROS was then at 7.2 and firmware at 6.44.4 and all is OK. Updating the firmware to 7.2 makes the same brick behaviour. I am going to use 7.1.5 firmware and 7.2 ROS for now.

Same here: RB4011 (without WiFi) bricked. Upgrade and reboot fine, update firmware and reboot fine. It then ran fine for about 24h, then sudden death. I can't even reset it. It just intermittently flashes the SFP+ light, then all port lights.

Update: managed to get back to it with netinstall, no other resets worked. Now reinstalling 7.2 and will put it in the rack again. Had no issues (so far) with our two CRS305-1G-4S+ and one CRS112-8P-4S, but looking at other posts here, it seems something is going wrong with the RB4011 and 7.2.
Can't confirm a general problem. My RB4011 (with WLAN and CAPsMAN on it) was updated from 7.1.5 to 7.2 without any probs (ROS and FW). The Config was updated from 6.47.10 over 6.49.5, 7.15 to 7.2. All went smooth.....
 
infabo
Member Candidate
Member Candidate
Posts: 297
Joined: Thu Nov 12, 2020 12:07 pm

Re: v7.2 is released!

Fri Apr 08, 2022 7:18 pm

But all this is offtopic, as it's a general issue with the "auto" setting since it was introduced, back in 6.48.
It is on-topic because of the claim that "it" was fixed. So yeah, let's talk about and report any issue. MT must know.
arm - fixed "auto" CPU frequency setting;
 
sebasGST
just joined
Posts: 3
Joined: Fri Sep 06, 2019 6:41 pm

Re: v7.2 is released!

Fri Apr 08, 2022 7:27 pm

Hello everyone, there's an option to don't show the date of build, and only show 7.2 (Stable)?, i dont like the build date in Winbox.

Thanks!
You do not have the required permissions to view the files attached to this post.
 
User avatar
rextended
Forum Guru
Forum Guru
Posts: 7431
Joined: Tue Feb 25, 2014 12:49 pm
Location: 🇮🇹, my 💔 is in 🇺🇦

Re: v7.2 is released!

Fri Apr 08, 2022 7:30 pm

No.
I like red text with blue background, there's an option?
 
User avatar
Znevna
Forum Veteran
Forum Veteran
Posts: 758
Joined: Mon Sep 23, 2019 1:04 pm

Re: v7.2 is released!

Fri Apr 08, 2022 7:51 pm

But all this is offtopic, as it's a general issue with the "auto" setting since it was introduced, back in 6.48.
It is on-topic because of the claim that "it" was fixed. So yeah, let's talk about and report any issue. MT must know.
arm - fixed "auto" CPU frequency setting;
It's not, I'll quote the thread ripper, @Znevna: viewtopic.php?t=184351#p921849
"rb5009 is arm64 not arm."
 
zwets
Posts: 0
Joined: Sat Mar 05, 2022 2:39 am

Re: v7.2 is released!

Fri Apr 08, 2022 8:14 pm


Same here: RB4011 (without WiFi) bricked. Upgrade and reboot fine, update firmware and reboot fine. It then ran fine for about 24h, then sudden death. I can't even reset it. It just intermittently flashes the SFP+ light, then all port lights.

Update: managed to get back to it with netinstall, no other resets worked. Now reinstalling 7.2 and will put it in the rack again. Had no issues (so far) with our two CRS305-1G-4S+ and one CRS112-8P-4S, but looking at other posts here, it seems something is going wrong with the RB4011 and 7.2.
Can't confirm a general problem. My RB4011 (with WLAN and CAPsMAN on it) was updated from 7.1.5 to 7.2 without any probs (ROS and FW). The Config was updated from 6.47.10 over 6.49.5, 7.15 to 7.2. All went smooth.....
I'll keep a keen eye out next week. I considered rolling back to 7.1.5 but with the netinstall + restore still in muscle memory (if you skip the head scratching and troubleshooting phase and jump straight to 'netinstall -r' you can be back online within the hour), I decided to bite the bullet.

To the MikroTiks listening in: thanks for a great job. Breakdowns suck but with rapid recovery available I'll still choose affordable & "progressive" over the "enterprise offerings".
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Fri Apr 08, 2022 10:07 pm

I'll keep a keen eye out next week. I considered rolling back to 7.1.5 but with the netinstall + restore still in muscle memory (if you skip the head scratching and troubleshooting phase and jump straight to 'netinstall -r' you can be back online within the hour), I decided to bite the bullet.
Remember with partioning you can experiment and rollback within a couple of minutes. Of course only on equipment that supports it, but RB4011 is among that.
 
pe1chl
Forum Guru
Forum Guru
Posts: 8559
Joined: Mon Jun 08, 2015 12:09 pm

Re: v7.2 is released!

Fri Apr 08, 2022 10:09 pm

Hello everyone, there's an option to don't show the date of build, and only show 7.2 (Stable)?, i dont like the build date in Winbox.
In the title bar and in System->Resources it shows only the version.
 
dzavy
just joined
Posts: 1
Joined: Wed May 13, 2020 1:01 pm

Re: v7.2 is released!

Fri Apr 08, 2022 10:49 pm

*) bridge - added fast-path and inter-VLAN routing FastTrack support when vlan-filtering is enabled;

How is this supposed to work? I haven't noticed any change in behavior on my CRS326-24G-2S+ with 7.2:

- VLAN interface (on bridge) to standalone interface - from what I can tell only return traffic is fasttracked, Orig/Repl Fasttrack packets is 0/35704
- inter-VLAN routing on bridge - no fasttrack at all, Orig/Repl Fasttrack packets is 0/0

FYI I do see some improvement in throughput which I suspect is due to the better load balancing between CPU cores.
 
pizzathehunt
just joined
Posts: 9
Joined: Tue Sep 04, 2018 2:11 pm

Re: v7.2 is released!

Fri Apr 08, 2022 11:29 pm



Same, my openvpn server TCP broken, cannot connect to.
After i downgrade 7.1.5 works fine.
Same for me :-(
Same problem with a RB750g3 after upgrading from 7.1.5 to 7.2. On my RB951Ui-2HnD OpenVPN still works with 7.2.

For a test I upgraded a Hap lite with 7.2, OpenVPN also works. Maybe a problem with newer CPU's?
 
AUsquirrel
newbie
Posts: 25
Joined: Fri Feb 21, 2014 10:28 pm

Re: v7.2 is released!

Sat Apr 09, 2022 12:38 am

Upgraded OK.
RB750Gr3
RB3011
mAP
cAP AC x 2

No problems except the RB3011 that since 7.1.3 now always needs to have the backup restored for IPV6 to work. Everything else works fine.
 
moiskey
just joined
Posts: 8
Joined: Mon May 31, 2010 9:34 am

Re: v7.2 is released!

Sat Apr 09, 2022 1:05 am

I hope that one day my network interface will work
version 6 works without problems
interfaces appear but do not change their running state

Image
 
User avatar
ingdaka
Trainer
Trainer
Posts: 436
Joined: Thu Aug 30, 2012 3:06 pm
Location: Albania
Contact:

Re: v7.2 is released!

Sat Apr 09, 2022 2:23 am

Just upgraded CCR2004-16G-2S+ / Overall OK
BGP Prefix Count still 0
*) bgp - added BGP advertisements display (requires output.keep-sent-attributes to be set); even that i set output.keep-sent-attributes=yes still no info on command
[username@identity] > routing/bgp/session/dump-saved-advertisements 
numbers: 1
[username@identity] > routing/bgp/session/dump-saved-advertisements 
numbers: 0
There are 2 BGP Peers
 
jezekus
just joined
Posts: 10
Joined: Sun Jun 09, 2013 9:08 pm

Re: v7.2 is released!

Sat Apr 09, 2022 11:52 am

Upgraded HEX S with SFP module from 6.49.5 to 7.2 and now all information about SFP module is gone.
Anyone else seeing this?
You do not have the required permissions to view the files attached to this post.
 
User avatar
Jotne
Forum Guru
Forum Guru
Posts: 2870
Joined: Sat Dec 24, 2016 11:17 am
Location: Magrathean

Re: v7.2 is released!

Sat Apr 09, 2022 2:20 pm

I hope that one day my network interface will work
version 6 works without problems
Not the same, but you can install VmWare and use CHR version of RouterOS.
 
User avatar
npeca75
Frequent Visitor
Frequent Visitor
Posts: 62
Joined: Thu Aug 03, 2017 3:12 pm

Re: v7.2 is released!

Sat Apr 09, 2022 5:31 pm

Upgraded HEX S with SFP module from 6.49.5 to 7.2 and now all information about SFP module is gone.
Anyone else seeing this?
+1
to be precise , +3

3 pcs of rb760igs
3 different type of multimode gigabit fiber module

and all info was gone
winbox = blank,
snmp = blank
 
User avatar
ELKABILLA
Posts: 0
Joined: Thu Mar 31, 2022 4:43 am

Re: v7.2 is released!

Sat Apr 09, 2022 10:33 pm

no problems till now.
a shame OpenVPN doesnt support TLS Auth
 
jezekus
just joined
Posts: 10
Joined: Sun Jun 09, 2013 9:08 pm

Re: v7.2 is released!

Sat Apr 09, 2022 11:51 pm

One more issue on RB760iGS - is HW offload on IPsec crypto working? Seeing more than double of cpu usage during transfer and getting cca watchdog reboot every hour
 
audaihss
just joined
Posts: 1
Joined: Mon Jul 20, 2020 8:17 pm

Re: v7.2 is released!

Sun Apr 10, 2022 12:46 am

Updated LHG XL 52 ac from 7.1.5 to 7.2 there is a problem with the device starting to reboot by itself every two minutes .. I did a factory reset to no avail, now I'm back to the older version and everything works fine
 
User avatar
edupre
Posts: 0
Joined: Mon Jun 09, 2014 9:02 pm

Re: v7.2 is released!

Sun Apr 10, 2022 1:05 am

I still having issue with my ISP GPON directly connected to my CCR2116. My PSU still going under fail state. I need to reboot my CCR2116 to retrieve stable state. I will send my supout to support for more analyse.
 
ahmedelbarbary
just joined
Posts: 19
Joined: Thu Dec 01, 2016 1:23 am

Re: v7.2 is released!

Sun Apr 10, 2022 2:37 am

RB 750 GR3 all interfaces down and up randomly
new.jpg
You do not have the required permissions to view the files attached to this post.
 
moiskey
just joined
Posts: 8
Joined: Mon May 31, 2010 9:34 am

Re: v7.2 is released!

Sun Apr 10, 2022 4:46 am

I hope that one day my network interface will work
version 6 works without problems
Not the same, but you can install VmWare and use CHR version of RouterOS.
I hope the support manages to solve this problem
I feel sorry. mikrotik don't let me down

Who is online

Users browsing this forum: Panbambaryla and 9 guests