Code: Select all
# apr/14/2022 17:55:32 by RouterOS 7.1.5
# software id = GFYW-4X1S
#
# model = RBcAPGi-5acD2nD
# serial number = B8C00A3F6636
/interface bridge
add fast-forward=no name=br-22
add fast-forward=no name=br-33
/interface bridge settings
set allow-fast-path=no
/ip address
add address=192.168.22.1/24 interface=br-22 network=192.168.22.0
add address=192.168.33.1/24 interface=br-33 network=192.168.33.0
/ip route print
Flags: D - DYNAMIC; A - ACTIVE; c, d, y - COPY
Columns: DST-ADDRESS, GATEWAY, DISTANCE
DST-ADDRESS GATEWAY DISTANCE
DAd 0.0.0.0/0 192.168.88.8 1
DAc 192.168.22.0/24 br-22 0
DAc 192.168.33.0/24 br-33 0
ping address=192.168.22.1
SEQ HOST SIZE TTL TIME STATUS
0 192.168.22.1 56 64 245us
1 192.168.22.1 56 64 356us
2 192.168.22.1 56 64 351us
3 192.168.22.1 56 64 458us
sent=4 received=4 packet-loss=0% min-rtt=245us avg-rtt=352us max-rtt=458us
ping address=192.168.22.1 interface=br-33
SEQ HOST SIZE TTL TIME STATUS
0 192.168.22.1 timeout
1 192.168.22.1 timeout
sent=2 received=0 packet-loss=100%
Address 192.168.33.1 is pingable but also not from br-22
I expected the two bridges to be routed to and from each other by default. There is no firewall as I have used an internal CAP for this test. Every search I've done on this forum suggests that inter lan routing is handled by the static routes in/ip route unless blocked by /ip firewall or if layer 3 is bypassed by fasttrack or hw offload or something.
This is the simplest config that demonstrates my problem. It's not a real world config.
My full config:
Code: Select all
# apr/14/2022 18:04:55 by RouterOS 7.1.5
# software id = GFYW-4X1S
#
# model = RBcAPGi-5acD2nD
# serial number = B8C00A3F6636
/interface bridge
add fast-forward=no name=br-22
add fast-forward=no name=br-33
add admin-mac=74:4D:28:A9:AD:AF auto-mac=no comment=defconf name=bridgeLocal
/interface wireless
# managed by CAPsMAN
# channel: 2452/20-Ce/gn/P(15dBm), SSID: xxxxxx, CAPsMAN forwarding
set [ find default-name=wlan1 ] antenna-gain=5 country=japan frequency-mode=\
manual-txpower ssid=MikroTik station-roaming=enabled
# managed by CAPsMAN
# channel: 5640/20-eCee/ac/DP(21dBm), SSID: xxxxxx, CAPsMAN forwarding
set [ find default-name=wlan2 ] antenna-gain=2 country=japan ssid=MikroTik \
station-roaming=enabled
/interface list
add name=WAN
add name=LAN
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/routing bgp template
set default as=65530 disabled=no name=default output.network=bgp-networks
/routing ospf instance
add name=default-v2
/routing ospf area
add disabled=yes instance=default-v2 name=backbone-v2
/system logging action
set 3 remote=192.168.88.53
/user group
set full policy="local,telnet,ssh,ftp,reboot,read,write,policy,test,winbox,passw\
ord,web,sniff,sensitive,api,romon,dude,tikapp,rest-api"
/interface bridge port
add bridge=bridgeLocal comment=defconf ingress-filtering=no interface=ether1
add bridge=bridgeLocal comment=defconf ingress-filtering=no interface=ether2
add bridge=bridgeLocal ingress-filtering=no interface=wlan1
add bridge=bridgeLocal ingress-filtering=no interface=wlan2
/interface bridge settings
set allow-fast-path=no
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ip settings
set max-neighbor-entries=8192
/ipv6 settings
set disable-ipv6=yes max-neighbor-entries=8192
/interface list member
add interface=ether1 list=LAN
add interface=ether2 list=LAN
add interface=wlan1 list=LAN
add interface=wlan2 list=LAN
add interface=br-33 list=LAN
add interface=br-22 list=LAN
/interface wireless cap
#
set bridge=bridgeLocal discovery-interfaces=bridgeLocal enabled=yes interfaces=\
wlan1,wlan2
/ip address
add address=192.168.22.1/24 interface=br-22 network=192.168.22.0
add address=192.168.33.1/24 interface=br-33 network=192.168.33.0
/ip dhcp-client
add comment="defconf test log" interface=bridgeLocal
/system clock
set time-zone-name=Africa/Harare
/system identity
set name=Cottage-CAP
/system logging
add action=remote topics=critical
add action=remote topics=error
add action=remote topics=info
add action=remote topics=warning
/system routerboard settings
set cpu-frequency=auto