I will post here because it has been a long time since I used routeros wireless features (around 6.13 or similar8, so I might be missing something basic…
Starting point
* isp cattv modem - hex s - plume access point (managed by the isp)
* brand new hap ac3 connected to the modem (to replace hex and ap
What I did
* update everything to 7.2.1
* export config fro hex s
* resettled the hap with no config
* manually copy and paste the config to the hap
* added the Wi-Fi config to the hap
Issues
“ on hex s I get 320/10 mobs with Speedtest on iPad
* on hap I get 222/6 mbps on the same iPad
Config
Both devices have the same firewall rules (basically allow lan traffic, block everything else), a whopping 6 filters and 1 nat./interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
add authentication-types=wpa2-psk mode=dynamic-keys name=casa supplicant-identity=MikroTik
/interface wireless
set [ find default-name=wlan1 ] band=2ghz-g/n country=japan disabled=no distance=indoors mode=ap-bridge security-profile=casa \
ssid=casa wps-mode=disabled
set [ find default-name=wlan2 ] band=5ghz-a/n/ac channel-width=20/40mhz-XX country=japan disabled=no distance=indoors mode=\
ap-bridge security-profile=casa ssid=casa
Is there something I am missing ?
Thanks
Giuliano
