The v7 new mikrotik is trying to communicate with a v6.48.1 router on our main site. I have provided below the BGP configuration of the before and after the upgrade, and also the configuration at the main site
v7- new mikrotik config:
Code: Select all
/routing bgp connection
add address-families=ip,vpnv4 as=55124 cisco-vpls-nlri-len-fmt=auto-bits \
connect=yes disabled=no hold-time=10s keepalive-time=10s listen=yes \
local.role=ebgp multihop=no name=remote-test#1 \
output.default-originate=never .network=bgp-networks \
.no-client-to-client-reflection=yes remote.address=10.5.124.1/32 .as=\
55100 router-id=10.201.200.1 routing-table=main templates=wsrv-newtest \
use-bfd=yes
/ip firewall address-list
add address=10.201.0.0/16 list=bgp-networks
/routing bgp template
set default disabled=no output.network=bgp-networks
add address-families=ip as=55124 disabled=no multihop=no name=wsrv-newtest \
output.network=bgp-networks .no-client-to-client-reflection=yes \
router-id=10.201.200.1 routing-table=main
v6.49.6 - new mikrotik previous config (before upgrading):
Code: Select all
/routing bgp network
add network=10.201.0.0/16 synchronize=no
/routing bgp peer
add hold-time=30s instance=wsrv-newtest name=remote-test#1 \
remote-address=10.5.124.1 remote-as=55100 ttl=default use-bfd=yes
/routing bgp instance
add as=55124 client-to-client-reflection=no name=wsrv-newtest router-id=\
10.201.200.1
v6.48.1 main router config:
Code: Select all
/routing bgp network
add network=10.100.0.0/16 synchronize=no
/routing bgp peer
add hold-time=30s instance=wsrv-test name=wsrv-test#1 remote-address=\
10.5.124.2 remote-as=55124 ttl=default use-bfd=yes
/routing bgp instance
add as=55100 client-to-client-reflection=no name=wsrv-test router-id=\
10.200.200.1
We appreciate if anyone can help us
Thanks!