I installed Plex server as a docker container in my Ubuntu server and the Plex app on my smart TV.
They used to lay on the same local subnet until a few days ago, and everythign worked well.
I then decided to put the smart tv, as long as the AP on the same room of my house on a different subnet in order to separate guest wifi and the tv traffic from my private LAN.
I am now struggling to enable my smart tv, I mean the plex app installed on tv, to reach my plex server. The smarTV is on subnet 10.10.10.0/24 and its IP is 10.10.10.30,
my server has IP 192.168.3.12.
I set this firewall rule to drop traffic from subnet 10.10.10.0/24:
Code: Select all
add action=drop chain=forward comment="DROP Guest" dst-address=192.168.3.0/24 log=yes log-prefix=drop-guest src-address=10.10.10.0/24
I then set another firewall rules on the top of it to enable only the plex app on my tv to reach the plex server:
Code: Select all
add action=accept chain=forward comment="Accept Plex" dst-address=192.168.3.12 in-interface=bridge-guest src-address=10.10.10.30
Code: Select all
add action=accept chain=forward comment="Accept Plex" dst-address=192.168.3.12 dst-port=32400 protocol=tcp src-address=10.10.10.30
Could you help me figure it out please?
Thanks