Hi there,
I'm completely new to Mikrotik switches and bought 2x CRS326-24S+2Q+RM switches. So 2x 40Gbps and the rest 10Gb SFP+. And somehow I can not even get a working VLAN configuration. I'm following the exact manual examples, but still it does not work.
I have 2 servers, an ESXi host and a Storage host and i connect them to the 40Gbps interface.
Switch 1:
Port qsfpplus1-1 (name=Uplink-sw2) = Uplink to switch 2
Port qsfpplus2-1 (name=qsfpplus2-ESXi) = ESXi Host
Switch 2:
Port qsfpplus1-1 (name=qsfpplus1-SAN) = Storage Host
Port qsfpplus2-1 (name=Uplink-sw1) = Uplink to switch 1
Leaving everything default, without any vlans configured and one bridge, i can make the connection from the ESXi host to the Storage. All traffic goes over vlan 1. But as soon as i configure vlan 6, set the uplink as a tagged port and enable vlan filtering, communication stops. In SWOS everything works perfectly, so no vlan issues here.
I keep the config between the switches the same and simple. I know i don't have to set the untagged interface in the bridge-vlan, because RouterOS sees this automatically in the pvid config of the interface. But still, it does not work.
Also tried ingress-filtering=no on the uplink interfaces and bridge interface, but that does not work either. So enabled it on all interfaces and the bridge.
Tried differtent RouterOS versions and i have this problem with all versions.
I'm lost....What am i missing???
Switch 1:
# jan/02/1970 01:23:11 by RouterOS 7.2.3
#
# model = CRS326-24S+2Q+
/interface bridge
add name=bridge1 vlan-filtering=yes
/interface ethernet
set [ find default-name=qsfpplus1-1 ] name=Uplink-sw2
set [ find default-name=qsfpplus2-1 ] name=qsfpplus2-ESXi
/disk
set usb1 disabled=no
set usb1-part1 disabled=no name=usbdisk1
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=Uplink-sw2
add bridge=bridge1 interface=qsfpplus2-ESXi pvid=6
/interface bridge vlan
add bridge=bridge1 tagged=Uplink-sw2 untagged=qsfpplus2-ESXi vlan-ids=6
/ip address
add address=192.168.1.2/24 interface=ether1 network=192.168.1.0
/system routerboard settings
set boot-os=router-os
Switch 2:
# jan/02/1970 01:29:45 by RouterOS 7.2.3
#
# model = CRS326-24S+2Q+
/interface bridge
add name=bridge1 vlan-filtering=yes
/interface ethernet
set [ find default-name=qsfpplus2-1 ] name=Uplink-sw1
set [ find default-name=qsfpplus1-1 ] name=qsfpplus1-SAN
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge1 interface=ether1
add bridge=bridge1 interface=Uplink-sw1
add bridge=bridge1 interface=qsfpplus1-SAN pvid=6
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface bridge vlan
add bridge=bridge1 tagged=Uplink-sw1 untagged=qsfpplus1-SAN vlan-ids=6
/ip address
add address=192.168.1.3/24 interface=ether1 network=192.168.1.0
/system routerboard settings
set boot-os=router-os