The Walk command works successfully:
Code: Select all
/tool snmp-walk address=10.10.10.10 community=public
OID TYPE VALUE
1.2.840.10036.1.1.1.1.4 octet-string \B5\C6\10\t$
1.2.840.10036.1.1.1.1.9 octet-string \B5\C6\10\t"
1.2.840.10036.1.1.1.1.10 octet-string \00\02\03\04\05\06
1.2.840.10036.1.1.1.2.4 integer 100
1.2.840.10036.1.1.1.2.9 integer 100
1.2.840.10036.1.1.1.2.10 integer 100
1.2.840.10036.1.1.1.3.4 integer 1
1.2.840.10036.1.1.1.3.9 integer 1
But the Get command does not:
Code: Select all
/tool snmp-get address=10.10.10.10 oid=1.3.6.1.4.1.43356.2.1.2.6.6.0 community=public
error - contact MikroTik support and send a supout file (3)