Hey, I am at a point where I have somewhat "stabilized" my firewall configuration and there probably won't be any huge changes in near future.
If you have a moment, Please review my firewall config and let me know if there is anything I can improve.
My network has a total of 9 VLANs.
10 => My vlan
20 => Neighbour's #1
30 => Neighbour #2
40 => Neighbour #3
50 => LAB
60 => Guest
99 => Management
150 => WAN1 Only VLAN
160 => WAN3 Only VLAN
(WAN1 and WAN2 are from same ISP)
I have also read some criticism of using a address list like, `not_in_internet` but in my case I use chains and had to use the `not_in_internet` address list to control internet access.
Please let me know if you have any questions and if there is anything I can improve in this config.
edit #1: Removed serial number.