try to bridge two interfaces together in CHR, the printer connected to ether2, ether1 connected to hap ac2, ether2 and ether1 in the same bridge(bridge1), dhcp set on bridge1
Printer(ether2) can get ip address from dhcp, but my pc can not ping my printer.
Try ping from CHR with /tools ping 192.168.1.222 interface=bridge1 , and it works.
Bridging two phy interfaces and client can't ping.
You do not have the required permissions to view the files attached to this post.
Re: Bridging two phy interfaces and client can't ping.
Wat is your hAP ac configuration? Get your PC his IP-address from the CHR or from the hAP ac? Are PC and Printer in the same network?
The hAP ac is not only a simple access point, depending on the configuration it can be a complete router with a firewall.
The hAP ac is not only a simple access point, depending on the configuration it can be a complete router with a firewall.
Re: Bridging two phy interfaces and client can't ping. [SOLVED]
Fixed by turning the esxi vswitch promiscuous mode on.
Thanks all.
Thanks all.