What interface should ip4 traffic arrive on the router ?
It's not clear to me what interface pppoe-out1 should be ... and that's the one accepting WG in your ip4 firewall rules.
both site is "pppoe-out1"
either I add "in interface" or not, both mikrotik wont connect
however, I have tested between remote PC wireguard to mikrotik wireguard
Remote PC A to Site A WG = Connected
Remote PC B to Site B WG = Connected
both are connected... Mikrotik A WG cannot connect IPv4 endpoint to Mikrotik B WG or vice-versa (A>B, B>A)
torch wg.png
Torch showing both is trying to connect, same issue with different port...
.
PS remove sensitive info from exports. Serial number, pppoe-account names, public key (useless without private key, I know, but no need to test the waters ...)
deleted old one
.
EDIT:
I see ... sfp, then vlan, then pppoe-out1
Yes, both site using GPON ONU SFP
...
if IPv6 endpoints can connect both mikrotik, it seem IPv4 FastTrack causing this issue
You do not have the required permissions to view the files attached to this post.