Newb here that needs some help. I am a Tech II at for municipality and we are trying out the LHG dished vs Unifi. I configured a couple LHG5 dishes in our "lab" environment (really our office) and it is discovered by Winbox and I can ping it and they can also talk with the far side just being wireless. When I plug one of the dishes into our network I cannot ping it and Winbox doesn't see it either. My "lab" enviroment the near dish is plugged into a USB network adaptor set on the same subnet as I configured the dish. Below is a basic diagram and images of my config. I need some help on this or even directed to a previous post of what I am probably configuring wrong.
My basic "lab" setup where the dishes can communicate .
USB ethernet adaptor > LHG5 Dish ========= LHG5 Dish # 2 (only POE powered)
(192.168.13.250) (192.168.13.245) (192.168.13.246)
This is the setup where I cannot ping the dish or see it with Winbox.
Network switch > LHG5 Dish
With this setup I connected the dish to our network switch and the PC I tried to ping the dish from is on the same network.
[
This is the network port I am plugging it into