Community discussions

MikroTik App
 
informant
newbie
Topic Author
Posts: 28
Joined: Wed Jul 22, 2015 10:33 am

eth port speedcheck

Thu Jun 16, 2022 9:35 am

Hi all, i need a small script, what check ports speed, if it was 1g and if it was goes down too 100m restart autonack or complete port to get up to gbit, can anybody help please?
regards
 
User avatar
Znevna
Forum Guru
Forum Guru
Posts: 1347
Joined: Mon Sep 23, 2019 1:04 pm

Re: eth port speedcheck

Thu Jun 16, 2022 2:05 pm

"restarting" a port doesn't fix the "why" it got down to 100Mbps, from 1Gbit. Fix your loose connections.
 
informant
newbie
Topic Author
Posts: 28
Joined: Wed Jul 22, 2015 10:33 am

Re: eth port speedcheck

Thu Jun 16, 2022 2:18 pm

Hi is a PoE before and if it was very hot and 72Volt are in PoE Port on PoE flapp and goes doen to 100M i mean. Well cable and grounding are ok.
 
User avatar
inteq
Member
Member
Posts: 402
Joined: Wed Feb 25, 2015 8:15 pm
Location: Romania

Re: eth port speedcheck

Sun Jul 17, 2022 2:34 am

Using The Dude, add a new probe like:
1.png
With OID:
iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifSpeed.1
Some routers will have a different OID. For example, HAP AC2 uses
 iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifSpeed.3
for port 1
Add the probe to the device
You do not have the required permissions to view the files attached to this post.
 
User avatar
chechito
Forum Guru
Forum Guru
Posts: 2989
Joined: Sun Aug 24, 2014 3:14 am
Location: Bogota Colombia
Contact:

Re: eth port speedcheck

Sun Jul 17, 2022 4:33 am

Using The Dude, add a new probe like:
1.png
With OID:
iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifSpeed.1
Some routers will have a different OID. For example, HAP AC2 uses
 iso.org.dod.internet.mgmt.mib-2.interfaces.ifTable.ifEntry.ifSpeed.3
for port 1
Add the probe to the device

thank you for sharing

Who is online

Users browsing this forum: JDF, miks and 23 guests