Community discussions

MikroTik App
 
pedkoschi
just joined
Topic Author
Posts: 5
Joined: Sat Jun 11, 2022 1:51 pm

Exported config cannot be restored

Sat Jun 18, 2022 11:47 am

Hello, many greetings to all and to Riga,
I want to report a small discrepancy (ROS 7.3.1):

If I save the configuration of a device (hAP ac) I get these lines, among others:
/interface ethernet switch vlan
add independent-learning=yes ports=ether5 switch=switch1
add independent-learning=yes ports=ether5 switch=switch1 vlan-id=1
add independent-learning=yes ports=ether5 switch=switch1 vlan-id=11
add independent-learning=yes ports=ether5 switch=switch1 vlan-id=12
add independent-learning=yes ports=ether5 switch=switch1 vlan-id=99
This configuration cannot be restored due to a missing parameter in the first line.

This parameter should either be exported when backing up, or its absence should be accepted when restoring.

Thanks!

Who is online

Users browsing this forum: rplant and 65 guests