Hello.
Please help me understand what and why need to change/remove/add to this config:
Router-Switch-AP (all in one)
I need to make VLAN on chip instead of cpu VLAN on RB3011 UiAS-RM where using this as router+switch without any WLAN and other managed switch with only access ports like this:
ether1 - WAN
ether2 - VLAN100 MGMT
ether3-6 - VLAN10 Staff (DHCP 192.168.0.1/24 100-150)
ether7 - VLAN20 (for now here will be connected to ISP device for route back and next to our other company location)
ether8 - VLAN30
ether9 - VLAN40 Guest
ether10 -not used for now
All VLAN's need to be secured and isolated with different subnets/dhcp without any communication between.
I tried make my config but i have head ache with MikroTik and for sure i need to learn about it much more. Last time i messed something and lost any communication with router at any port xD.
And more straight question:
How to bond ether3-6 to make for them address (gateway) and DHCP server for that interfaces?