Was just wondering if some one can help me with setting up 3 x LTE connections on my RB4011iGS+5HacQ2HnD-IN. I have 3 x RBLHGGR&R11e-LTE6 each connecting to a different ISP. What i want to do is set up 3 x bridges and each bridge will get internet access from it's own RBLHGGR&R11e-LTE6.
Eth1: 10.100.1.0/30, 1 x RBLHGGR&R11e-LTE6 (10.100.1.1) will give RB4011iGS+5HacQ2HnD-IN (10.100.1.2) IP on this port.
Eth2: 10.100.2.0/30, 1 x RBLHGGR&R11e-LTE6 (10.100.2.1) will give RB4011iGS+5HacQ2HnD-IN (10.100.2.2) IP on this port.
Eth3: 10.100.3.0/30, 1 x RBLHGGR&R11e-LTE6 (10.100.3.1) will give RB4011iGS+5HacQ2HnD-IN (10.100.3.2) IP on this port.
Bridge1 (192.168.77.0/24:::192.168.77.1 Gateway): Eth4 + Wlan1 and Wlan2 (My home network). Bridge1 on RB4011iGS+5HacQ2HnD-IN must get it's internet from Eth1.
Bridge2 (192.168.78.0/24:::192.168.78.1 Gateway): Eth5 + Eth6 (Guest Houses networks). Bridge2 on RB4011iGS+5HacQ2HnD-IN must get it's internet from Eth2. I am using 2 x RBSXTsqG-5acD on these ports and everything connecting here uses Hotspot/Radius/User Manager.
Bridge3 (192.168.79.0/24:::192.168.79.1 Gateway): Eth7 + Eth8 (Guest Houses networks). Bridge3 on RB4011iGS+5HacQ2HnD-IN must get it's internet from Eth3. I am using 2 x RBSXTsqG-5acD on these ports and everything connecting here uses Hotspot/Radius/User Manager.
;;; The guest houses has their own set of RBSXTsqG-5acD pointing to me and multiple RBcAPGi-5acD2nD-XL for hotspots.
;;; RB4011iGS+5HacQ2HnD-IN is the User Manager for the entire network.
Note that I don't need configuration setting for Hotspot/Radius/User Manager or for the guest houses networks. All I need is configuration settings for the the main router to direct each bridge to it's own internet connection.