My problem is that although I open the ports both on the antenna to which the router is connected and also on the router in question the NAT is not carried out.
The strange thing is that port 8291 was turned correctly by the antenna but the rest apparently all seem completely blocked.
This is the configuration of my NAT rules:
Code: Select all
/ip firewall nat
add action=masquerade chain=srcnat out-interface=ether1-WAN src-address=\
192.168.1.0/24
add action=dst-nat chain=dstnat dst-address=*PUBLIC IP* dst-port=\
37777,443,27401,80 protocol=tcp to-addresses=192.168.1.200
add action=dst-nat chain=dstnat dst-address=*PUBLIC IP* dst-port=\
37777,443,27401,80 protocol=udp to-addresses=192.168.1.200
add action=dst-nat chain=dstnat dst-address=*PUBLIC IP* dst-port=1194 \
protocol=tcp to-addresses=192.168.1.100
add action=dst-nat chain=dstnat dst-address=*PUBLIC IP* dst-port=1194 \
protocol=udp to-addresses=192.168.1.100
* Public IP hide for client privacy