Hello there, I am using Fiddler Classic as my proxy server
If I manualy enter its proxy server into my phone for instance everything works as expected
The problem comes, when I would like to proxy network from device which does not allow me to manualy specify proxy settings, so I would need to force it to use my proxy
My network looks like this
pppoe-out1 -- connection to the outside world
bridge -- (dhcp server here, ether2-master, NAT, wlan2 all in it)
wlan2 -- where wireless devices connect
My proxy server has the folowing IP: 192.168.88.12
My proxy listenes on port: 8888
My target device (which I would like to proxy requests from to my proxy) has this ip: 192.168.88.25
I tried many rules:
* /ip firewall nat add chain=dstnat action=dst-nat to-address=192.168.88.12 to-ports=8888 protocol=tcp dst-port=80,443 in-interface=bridge
Internet doesn't work on target device, proxy sees nothing
I also tried putting this rule before defconf: masquerade but still nothing
* /ip firewall nat add chain=dstnat action=dst-nat to-address=192.168.88.12 port=8888 protocol=tcp
Internet doesn't work on target device, proxy sees nothing
I also tried putting this rule before defconf: masquerade but still nothing
Now I am trying with ipv4 http website this because if I can make it work on http first, I will tackle https later
Not sure what I am doing wrong
I would just like to force my device to use my webproxy just like entering it direcly into it would
Thanks for Anwsering and Best Regards