Community discussions

MikroTik App
 
edalb1979
just joined
Topic Author
Posts: 10
Joined: Mon Jan 15, 2018 3:02 pm

RoS7.4 BGP Output network not sending prefixes

Thu Jul 21, 2022 12:33 pm

Good day

So I started diving into RoS7 as I have received a CCR2116 that I need to install into my DC.
I have a lab set where I have 2 RoS7.4 devices.
1, CHR
2. CCR2116

CHR (Is acting as my ISP Gateway)
CCR2116 (Core router)

So I have followed tutorials and I can see that the BGP session is establishing.
And when I select Output Redistribute on the CCR I see that all the connected routs in my routing table is being sent to the CHR.
So I can confirm that the BGP session is working.

When I disable Output Redistribute and I select Output Network and I match it to the Address list in IP > Firewall it just does not seam that the
prefixes are being sent.

CCR Config
name="bgp1"
remote.address=10.249.88.1/32 .as=65002
local.default-address=10.249.88.2 .role=ebgp
routing-table=main as=65001
output.network=BGP_Address_List

CHR Config
name="bgp1"
remote.address=10.249.88.2/32 .as=65001
local.default-address=10.249.88.1 .role=ebgp
routing-table=main as=65002
input.filter=in-filte

So not sure if I am missing anything.
Just a note most of the tutorials I found is still referring to V7.1 so not sure if I am missing something and cant seam to find any usefull information in the Wiki/Support docs.

Any advice would be appreciated.

Who is online

Users browsing this forum: No registered users and 86 guests