I have something like this: RouterOS 7.4
VLAN 110 - Home network
VLAN 190 - Guest network
VALN 3 - Management network
On HAPac:
Acts like switch with CAPsMAN and CAP onboard. Trunked with "main" L3-switch.
All ethernet ports bridged.
Wlan interfaces automaticaly bridged by CAPsMAN provisioning.
Code: Select all
/interface/ethernet/switch/port> print
Columns: NAME, SWITCH, VLAN-MODE, VLAN-HEADER, DEFAULT-VLAN-ID
# NAME SWITCH VLAN-MODE VLAN-HEADER DEFAULT-VLAN-ID
0 ether1 switch1 secure add-if-missing 3
1 ether2 switch1 secure always-strip 110
2 ether3 switch1 secure always-strip 110
3 ether4 switch1 secure always-strip 110
4 ether5 switch1 secure always-strip 3
5 switch1-cpu switch1 secure leave-as-is 3
/interface/ethernet/switch/vlan> print
Columns: SWITCH, VLAN-ID, PORTS
# SWITCH VLAN-ID PORTS
0 switch1 110 ether1
ether2
ether3
ether4
1 switch1 190 ether1
2 switch1 3 ether1
ether5
switch1-cpu
/interface/bridge/port> print
Flags: I - INACTIVE; D - DYNAMIC; H - HW-OFFLOAD
Columns: INTERFACE, BRIDGE, HW, PVID, PRIORITY, PATH-COST, INTERNAL-PATH-COST, HORIZON
# INTERFACE BRIDGE HW PVID PRIORITY PATH-COST INTERNAL-PATH-COST HORIZON
0 H ether1 bridge1 yes 1 0x80 10 10 none
1 I H ether2 bridge1 yes 1 0x80 10 10 none
2 I H ether3 bridge1 yes 1 0x80 10 10 none
3 I H ether4 bridge1 yes 1 0x80 10 10 none
4 I H ether5 bridge1 yes 1 0x80 10 10 none
5 D wlan1 bridge1 110 0x80 10 10 none
6 D wlan3 bridge1 190 0x80 10 10 none
7 D wlan2 bridge1 110 0x80 10 10 none
8 D wlan4 bridge1 190 0x80 10 10 none
/interface/vlan> print
Flags: R - RUNNING
Columns: NAME, MTU, ARP, VLAN-ID, INTERFACE
# NAME MTU ARP VLAN-ID INTERFACE
0 R vlan110 1500 enabled 110 bridge1
1 R vlan190 1500 enabled 190 bridge1
Everything works fine, except that the clients of CAP3 do not receive IP-settings from the DHCP server.
What I am doing wrong?..
Please help!