Hello my friends..!. Hope you are all doing good..
So i have this situation.
My mikrotik router 951ui have 5 interface
Eth1. The WAN interface with the ip
192. 168.134.2/30
Eth2. The camera interface with the ip range 192.168.10.1/24
The dhcp is enable on this interface and there is a src nat rule to
The out interface 192.168.134.2 so it has internet access.
Eth3. The pbx interface with ip range 192.168.20.1/24 also it has internet access and dhcp enable.
Eth4. The data interface with ip 192.168.30.1/23
Also interent access with dhcp on it.
So my question is : how can i prevent traffic between those interface, i mean not just prevent ping between ports but all traffic. In my current situation if some one connect to ethernet data port and take from 192.168.30.1 range it can easly access to camera and even the MK router it self, i want to prevent that.
Please anyone can give me advise on this situation..?
well i know how can i setup VLANs but only with two Mikrotik router, in my situation i have only one 952ui MK router with three switches connected to it's interfaces one by one.