Here's what I've done so far.
Code: Select all
/interface vlan
add interface=ether1 name=guest_network vlan-id=1003
/ip pool
add name=guest_dhcp ranges=192.168.30.100-192.168.30.200
/ip dhcp-server
add address-pool=guest_dhcp disabled=no interface=guest_network lease-time=1h name=\
guest_server
/ip address
add address=192.168.30.1/24 comment="For guest wireless network" interface=\
guest_network network=192.168.30.0
/ip dhcp-server network
add address=192.168.30.0/24 dns-server=8.8.8.8 domain=omthego.local gateway=192.168.30.1 \
netmask=24
When I connect a device to the guest wireless network, it gets an IP address in the 192.168.30.x range but it doesn't see an internet connection. I can see traffic on the guest_network interface in RouterOS.
It seems like I've missed the step that connects the vlan to the internet. I'm a software developer, not a networking expert, so a lot of these concepts are foreign to me. I know the basics for keeping a consumer home network running, but I've never worked with VLANs before. How can I get the 1003 VLAN to see the internet?