Hi Mikrotik Community,,
I have a MIkrotik hex router in our head office with the following configuration:
ether1 - WAN with static IP address
VLAN with ID 3050 assigned to ether1(WAN) with IP address 192.168.2.1
bridge(ether2-ether4) with ip 192.168.1.1
DHCP server with pool from 192.168.1.0/24 assigned to the bridge
DHCP server with pool from 192.168.2.0/24 assigned to the VLAN interface
Our ISP which is the same in our head and our branch offices, has configured a VLAN to connect our branch office to our head office. In the branch office there is a VLAN switch configured by the ISP.
The current configuration is working by now with m0n0wall router which I want to replace with this Mikrotik hex router.
The problem with Mikrotik router is that the computers in a branch office receives correctly IP addresses from 192.168.2.0/24 but they neither have connection to Internet nor to the LAN network in head office - 192.168.1.0/24.
I have configured VLANs in the past assigned to the bridge and there is no such a problem, so I suppose that the reason is that the VLAN is on the WAN port.
What I have to do so the VLAN network have connection to the internet(masquaraded by Mikrotik router) and have access to resources in 192.168.1.0?
Best Regards,
Pavlin