Hello.
As shown in the figure below, many of the same logs are generated in the firewall log.
Is it possible to have only one log generated per event?
Always grateful for your help
Thanks for relpy.These are (almost certainly) all separate events ... hard to tell from screenshot because the important part of log is truncated from screen, posting text (in terminal run command /log print and copy-paste part of output) would tell more about that.
21:51:36 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14117->192.168.0.180:80, len 52
21:51:36 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14118->192.168.0.180:80, len 52
21:51:37 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14125->192.168.0.180:80, len 52
21:51:37 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14126->192.168.0.180:80, len 52
21:52:31 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14128->192.168.0.180:80, len 52
21:52:31 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14129->192.168.0.180:80, len 52
21:52:32 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14136->192.168.0.180:80, len 52
21:52:32 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (SYN), 192.168.0.37:14137->192.168.0.180:80, len 52
21:52:42 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (ACK), 192.168.0.37:14125->192.168.0.180:80, len 41
21:52:42 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (ACK), 192.168.0.37:14127->192.168.0.180:80, len 41
21:53:37 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (ACK), 192.168.0.37:14128->192.168.0.180:80, len 41
21:53:37 firewall,info input: in:ether8 out:(unknown 0), connection-state:new src-mac 40:31:3c:f5:4f:4f, proto TCP (ACK), 192.168.0.37:14129->192.168.0.180:80, len 41
Reason that you have many logs are because the 192.168.0.37 creates many session. So the problem is a that PC/Server (192.168.0.37).
Why do it create many session and not stick that one.
thanks for replyModerator: do not quote preceding post.