Excited to start learning some new MT devices! Current background is with procurve/aruba/pfsense.
Using the detailed info from viewtopic.php?t=143620, I've setup a new CRS328 as a switch with a separate router (RoaS) (switch_hybrid.rsc). My problem is that I've created a management vlan, but cannot access the switch from the management IP via WebFig. Strange enough, I can ping and SSH into the switch. My laptop is connected to the trunk port with a tagged interface on vlan105, using an IP of 10.27.5.123/24. What have I done wrong?
Client config:
Code: Select all
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=6063<RXCSUM,TXCSUM,TSO4,TSO6,PARTIAL_CSUM,ZEROINVERT_CSUM>
ether 00:e0:4c:cb:67:74
inet6 fe80::182f:68a9:b294:228c%vlan0 prefixlen 64 secured scopeid 0x10
inet 10.27.5.123 netmask 0xffffff00 broadcast 10.27.5.255
nd6 options=201<PERFORMNUD,DAD>
vlan: 105 parent interface: en9
media: autoselect (1000baseT <full-duplex>)
status: active
Here's my switch export:
Code: Select all
# jan/02/1970 01:28:15 by RouterOS 7.5
# software id = CK17-UUJT
#
# model = CRS328-24P-4S+
# serial number =
/interface bridge
add name=BR1 protocol-mode=none vlan-filtering=yes
/interface vlan
add interface=BR1 name=SH_MGMT vlan-id=105
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/port
set 0 name=serial0
/interface bridge port
add bridge=BR1 frame-types=admit-only-vlan-tagged interface=ether24
add bridge=BR1 interface=ether1 pvid=101
add bridge=BR1 interface=ether2 pvid=101
/ip neighbor discovery-settings
set discover-interface-list=!dynamic
/interface bridge vlan
add bridge=BR1 tagged=ether1,ether2,ether24 vlan-ids=101-102
add bridge=BR1 tagged=BR1,ether24 vlan-ids=105
/ip address
add address=10.27.5.2/24 interface=SH_MGMT network=10.27.5.0
/ip route
add distance=1 gateway=10.27.5.1
/system identity
set name=sh-off-asw-1
/system routerboard settings
set boot-os=router-os