need to connect from custommer Win10 pc through miktorik to Cisco VPN..
Win10 PC 85.x.x.x >>> Mikrotik Wan 188.x.x.x - LAN 192.168.1.1 >>> Cisco VPN 192.168.1.100
On mikrotik is already configured working pptp/l2tp+ipsec, also i specify src-address only for this user
On win10 already set the AssumeUDPEncapsulationContextOnSendRule to 2 in registry
i forward port 500,4500 and esp, but then i try connect the cisco vpn client, i see only 1packet received on port 500, and then the connection is terminated,
any ideas??
Code: Select all
12 X ;;; test
chain=dstnat action=dst-nat to-addresses=192.168.1.90 protocol=ipsec-esp src-address=85.x.x.x dst-address=188.x.x.x log=yes log-prefix="test - "
15 X ;;; test
chain=dstnat action=dst-nat to-addresses=192.168.1.90 to-ports=500 protocol=udp src-address=85.x.x.x dst-address=188.x.x.x dst-port=500 log=yes log-prefix="test - "
17 X ;;; test
chain=dstnat action=dst-nat to-addresses=192.168.1.90 to-ports=4500 protocol=udp src-address=85.x.x.x dst-address=188.x.x.x dst-port=4500 log=yes log-prefix="test- "