I can ping Office1 and Office2 from HQ.
I can ping HQ from Office1 and Office2.
I cannot ping Office2 from Office1 and reverse.
After pinging I see the MAC address of the PC from the other Office int e the PC's ARP table and reverse but that is all. No ping and other communication.
HQ
Code: Select all
/interface bridge
add arp=proxy-arp fast-forward=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether2 ] arp=proxy-arp
/interface eoip
add allow-fast-path=no arp=proxy-arp local-address=10.36.6.204 loop-protect=on mac-address=02:6A:86:3F:2D:CF mtu=1500 name=eoip-tunnel1 remote-address=10.36.6.205 tunnel-id=7
add allow-fast-path=no arp=proxy-arp local-address=10.36.6.204 loop-protect=on mac-address=02:6A:86:3F:2D:CF mtu=1500 name=eoip-tunnel2 remote-address=10.36.6.206 tunnel-id=8
/interface bridge port
add bridge=bridge1 hw=no ingress-filtering=no interface=ether2
add bridge=bridge1 interface=eoip-tunnel2
add bridge=bridge1 interface=eoip-tunnel1
Code: Select all
/interface bridge
add arp=proxy-arp fast-forward=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether2 ] arp=proxy-arp
/interface eoip
add allow-fast-path=no arp=proxy-arp local-address=10.36.6.205 mac-address=02:F1:17:72:55:47 mtu=1500 name=eoip-tunnel1 remote-address=10.36.6.204 tunnel-id=7
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=eoip-tunnel1
Code: Select all
/interface bridge
add arp=proxy-arp fast-forward=no name=bridge1 protocol-mode=none
/interface ethernet
set [ find default-name=ether2 ] arp=proxy-arp
/interface eoip
add allow-fast-path=no arp=proxy-arp local-address=10.36.6.206 mac-address=02:F1:17:72:55:47 mtu=1500 name=eoip-tunnel2 remote-address=10.36.6.204 tunnel-id=8
/interface bridge port
add bridge=bridge1 interface=ether2
add bridge=bridge1 interface=eoip-tunnel2