I have 2 mikrotik devices.
Office1:
isp = internet through pppoe, static public ip, lets say xxx.xxx.xxx.111
ip firewall nat src nat masquarade out interface ppoe1
Office 2:
same,
isp = internet through pppoe static public ip, lets say xxx.xxx.xxx.222
ip firewall nat src nat masquarade out interface ppoe1
office 1 and office 2 are connected because there have to be one lan, so
in both all eth ports are bridged (isp gives internet through sfp),
in both bridges there is eoiptunnel.
Everything works fine, lan is visible, but in office 1 internet goes through xxx.xxx.xxx.111
and i want in office 2 for internet to go through xxx.xxx.xxx.222,
but it does not, it goes through office 1 ip: xxx.xxx.xxx.111.
So when i go to ip location website to chck my ip, i have the same on both offices,
xxx.xxx.xxx.111
but i should have
xxx.xxx.xxx.111 in office 1
and
xxx.xxx.xxx.222 in office 2.
Why and how to change it?