Hope you are all doing well,
I had this setup in the past and trying to do it again on a new mikrotik router but I seem to not be winning.
I have wireguard setup on a mikrotik router and using the windows client on a laptop to connect, It looks like it completes the handshake and I can see in the wireguard app and on the mikrotik that traffic is being sent and received.
However I cannot seem to ping or access anything through the tunnel.
My wireguard interface is 10.1.0.1/24
The Peer Allowed Address is 10.1.0.2/32
When I connect my windows client I cannot ping 10.1.0.1
Code: Select all
[admin@MikroTik] > export
# oct/21/2022 22:13:23 by RouterOS 7.3.1
# software id = KCSW-U7CS
#
# model = RouterBOARD 3011UiAS
# serial number = 780E06967849
/interface bridge
add admin-mac=6C:3B:6B:EC:B2:C0 auto-mac=no comment=defconf name=bridge
/interface ethernet
set [ find default-name=ether1 ] comment=WAN
set [ find default-name=ether2 ] comment="HP 48-Port PoE Switch"
set [ find default-name=ether4 ] comment="Milestone Server"
set [ find default-name=ether6 ] comment="T8516 16-Port PoE Switch"
set [ find default-name=ether7 ] comment="T8516 16-Port PoE Switch"
set [ find default-name=ether8 ] comment="Viewing Station"
/interface wireguard
add listen-port=13231 mtu=1420 name=wireguard1
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip pool
add name=dhcp_pool1 ranges=10.0.0.20-10.0.0.254
/ip dhcp-server
add address-pool=dhcp_pool1 interface=bridge name=dhcp1
/port
set 0 name=serial0
/interface bridge port
add bridge=bridge comment=defconf ingress-filtering=no interface=ether2
add bridge=bridge comment=defconf ingress-filtering=no interface=ether3
add bridge=bridge comment=defconf ingress-filtering=no interface=ether4
add bridge=bridge comment=defconf ingress-filtering=no interface=ether5
add bridge=bridge comment=defconf ingress-filtering=no interface=ether6
add bridge=bridge comment=defconf ingress-filtering=no interface=ether7
add bridge=bridge comment=defconf ingress-filtering=no interface=ether8
add bridge=bridge comment=defconf ingress-filtering=no interface=ether9
add bridge=bridge comment=defconf ingress-filtering=no interface=ether10
add bridge=bridge comment=defconf ingress-filtering=no interface=sfp1
/interface bridge settings
set use-ip-firewall=yes
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ip settings
set max-neighbor-entries=8192
/ipv6 settings
set max-neighbor-entries=8192
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/interface ovpn-server server
set auth=sha1,md5
/interface wireguard peers
add allowed-address=10.1.0.2/32 interface=wireguard1 public-key=\
"MmfYnKBKpBTvUHAe2qqRW+4vpisFzanw6YESeCu38wU="
/ip address
add address=10.0.0.1/24 comment=defconf interface=bridge network=10.0.0.0
add address=161.120.227.206/29 interface=ether1 network=161.120.227.200
add address=10.1.0.1/24 interface=wireguard1 network=10.1.0.0
/ip dhcp-server network
add address=10.0.0.0/24 dns-server=10.0.0.1 gateway=10.0.0.1
/ip dns
set allow-remote-requests=yes servers=8.8.8.8,8.8.4.4
/ip dns static
add address=10.0.0.1 comment=defconf name=router.lan
/ip firewall filter
add action=accept chain=input dst-port=13231 protocol=udp
add action=accept chain=input protocol=udp src-address=10.1.0.0/24
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMP" protocol=icmp
add action=accept chain=input comment=\
"defconf: accept to local loopback (for CAPsMAN)" dst-address=127.0.0.1
add action=drop chain=input comment="defconf: drop all not coming from LAN" \
in-interface-list=!LAN
add action=accept chain=forward comment="defconf: accept in ipsec policy" \
ipsec-policy=in,ipsec
add action=accept chain=forward comment="defconf: accept out ipsec policy" \
ipsec-policy=out,ipsec
add action=fasttrack-connection chain=forward comment="defconf: fasttrack" \
connection-state=established,related hw-offload=yes
add action=accept chain=forward comment=\
"defconf: accept established,related, untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment="defconf: drop all from WAN not DSTNATed" \
connection-nat-state=!dstnat connection-state=new in-interface-list=WAN
/ip firewall nat
add action=masquerade chain=srcnat comment="defconf: masquerade" ipsec-policy=\
out,none out-interface-list=WAN
add action=dst-nat chain=dstnat comment="ACS Mobile" dst-address=\
161.120.227.206 dst-port=55756 in-interface=ether1 protocol=tcp \
to-addresses=10.0.0.2 to-ports=55756
add action=dst-nat chain=dstnat comment="ACS PC" dst-address=161.120.227.206 \
dst-port=55752 in-interface=ether1 protocol=tcp to-addresses=10.0.0.2 \
to-ports=55752
add action=dst-nat chain=dstnat comment=Node-Red dst-address=161.120.227.206 \
dst-port=3005 in-interface=ether1 protocol=tcp to-addresses=10.0.0.102 \
to-ports=1880
add action=dst-nat chain=dstnat comment="P8815-2 3D People Counter" \
dst-address=161.120.227.206 dst-port=4100 in-interface=ether1 protocol=tcp \
to-addresses=10.0.0.223 to-ports=80
add action=dst-nat chain=dstnat comment="P3375-LV for MatLab" dst-address=\
161.120.227.206 dst-port=4200 in-interface=ether1 protocol=tcp \
to-addresses=10.0.0.215 to-ports=554
add action=dst-nat chain=dstnat dst-address=161.120.227.206 dst-port=3006 \
in-interface=ether1 protocol=tcp to-addresses=10.0.0.102 to-ports=80
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=161.120.227.201
/ipv6 firewall address-list
add address=::/128 comment="defconf: unspecified address" list=bad_ipv6
add address=::1/128 comment="defconf: lo" list=bad_ipv6
add address=fec0::/10 comment="defconf: site-local" list=bad_ipv6
add address=::ffff:0.0.0.0/96 comment="defconf: ipv4-mapped" list=bad_ipv6
add address=::/96 comment="defconf: ipv4 compat" list=bad_ipv6
add address=100::/64 comment="defconf: discard only " list=bad_ipv6
add address=2001:db8::/32 comment="defconf: documentation" list=bad_ipv6
add address=2001:10::/28 comment="defconf: ORCHID" list=bad_ipv6
add address=3ffe::/16 comment="defconf: 6bone" list=bad_ipv6
/ipv6 firewall filter
add action=accept chain=input comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=input comment="defconf: drop invalid" connection-state=\
invalid
add action=accept chain=input comment="defconf: accept ICMPv6" protocol=icmpv6
add action=accept chain=input comment="defconf: accept UDP traceroute" port=\
33434-33534 protocol=udp
add action=accept chain=input comment=\
"defconf: accept DHCPv6-Client prefix delegation." dst-port=546 protocol=\
udp src-address=fe80::/10
add action=accept chain=input comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=input comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=input comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=input comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=input comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=!LAN
add action=accept chain=forward comment=\
"defconf: accept established,related,untracked" connection-state=\
established,related,untracked
add action=drop chain=forward comment="defconf: drop invalid" connection-state=\
invalid
add action=drop chain=forward comment="defconf: drop packets with bad src ipv6" \
src-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: drop packets with bad dst ipv6" \
dst-address-list=bad_ipv6
add action=drop chain=forward comment="defconf: rfc4890 drop hop-limit=1" \
hop-limit=equal:1 protocol=icmpv6
add action=accept chain=forward comment="defconf: accept ICMPv6" protocol=\
icmpv6
add action=accept chain=forward comment="defconf: accept HIP" protocol=139
add action=accept chain=forward comment="defconf: accept IKE" dst-port=500,4500 \
protocol=udp
add action=accept chain=forward comment="defconf: accept ipsec AH" protocol=\
ipsec-ah
add action=accept chain=forward comment="defconf: accept ipsec ESP" protocol=\
ipsec-esp
add action=accept chain=forward comment=\
"defconf: accept all that matches ipsec policy" ipsec-policy=in,ipsec
add action=drop chain=forward comment=\
"defconf: drop everything else not coming from LAN" in-interface-list=!LAN
/system clock
set time-zone-name=Africa/Johannesburg
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
[admin@MikroTik] >